Cube satellites (CubeSats) have become increasingly popular in recent years due to their cost-effectiveness and the rapid production capabilities enabled by commercial off-the-shelf components. This research comprehensively reviews 45 antenna designs for CubeSats operating in high-frequency bands, specifically the Ku, K, and Ka bands. Among the antennas reviewed are fourteen patch and patch array antennas, one slot antenna, two leaky wave antennas, three array antennas, seven reflector antennas, eight reflectarray antennas, three metasurface antennas, four cavity-backed antennas, one helical antenna, one lens antenna, and one horn antenna. These antennas are evaluated based on performance parameters such as gain, bandwidth, reflection coefficient, CubeSat size, and deployability to determine which designs suit the limited space available on CubeSats. Particular attention is given to the challenges in designing CubeSat antennas, including achieving high gain, broad bandwidth, multi-band capability, low profile, and circular polarization. This research aims to enhance our understanding by identifying high-frequency antenna designs that may benefit future CubeSat missions.
Ku-band CubeSat downlinks need compact antennas with high gain and circular polarization. We present a single-feed, single-layer circularly polarized patch array for a 1.5 U CubeSat. Asymmetric microstrip extensions provide circular polarization, and a power divider feeds four series-fed sub-arrays on RT/Duroid 5880. We simulated the 54.12 mm × 106.53 mm antenna alone and on a skeletonized 1.5 U CubeSat frame and measured it in an anechoic chamber. Simulations predict a right-hand circularly polarized (RHCP) gain of about 15 dBi and an axial ratio of about 1 dB at 12.5 GHz. The prototype is matched over 12.3–13.0 GHz, and its axial ratio reaches about 1 dB at 12.6 GHz with a 3 dB bandwidth of about 0.1 GHz; the measured RHCP gain is about 10 dBi. In simulation, the modeled frame hardly affects matching and gain but raises the axial ratio to about 2.3 dB. Approximate estimates attribute most of the ∼5 dB gain difference to pattern degradation, polarization mismatch, and unmodeled feed losses; substrate tolerances account for only about a quarter of the frequency shift. Thus, the simple planar antenna provides circular polarization and about 10 dBi gain, but its narrow axial-ratio bandwidth constrains on-orbit use.
About Me
RF/Microwave Design Engineer | M.Sc., Electronics and Communication Eng., ITU
RF/Microwave Design Engineer | M.Sc., Electronics and Communication Eng., ITU