In this paper, a field effect transistor (FET)-type sensor with Pt-decorated In2O3 (Pt-In2O3) nanoparticles is fabricated for detecting H2 gas at room temperature. A pulsed measurement method is adopted to continuously alternate between pre-biasing the gate and reading the drain current of the FET-type sensor. This method effectively reduces the drift in the sensing signal. It is also found that negative pre-bias voltages can dramatically shorten the recovery time of the sensor after sensing H2, while positive pre-bias voltages have the opposite effect. The H2 sensing performance of the sensor is characterized under the enhancement of a pulsed negative pre-bias. By calculating and comparing the root mean square, signal-to-noise ratio, and detection limit of the sensor under different operating regions, it is found that the sensor has the best sensing performance in the subthreshold region, which is suggested to be the optimum operating region for FET-type sensors. In addition, the presence of oxygen significantly consumes the hydrogen molecules and reduces the room-temperature H2 sensitivity of the sensor. The proposed sensor presents promising H2 sensing properties, and this research could be a guide for the use of FET-type sensors in more gas detection applications.
Sensitive H2 sensors at low concentrations and room temperature are desired for the early warning and control of hydrogen leakage. In this paper, a resistive sensor based on Pt-doped In2O3 nanoparticles was fabricated using inkjet printing process. The H2 sensing performance of the sensor was evaluated at low concentrations below 1% at room temperature. It exhibited a relative high response of 42.34% to 0.6% H2. As the relative humidity of 0.5% H2 decreased from 34% to 23%, the response decreased slightly from 34% to 23%. The sensing principle and the humidity effect were discussed. A dynamic current sensing model for dry H2 detection was proposed based on Wolkenstein theory and experimentally verified to be able to predict the sensing behavior of the sensor. The H2 concentration can be calculated within a short measurement time using the model without waiting for the saturation of the response, which significantly reduces the sensing and recovery time of the sensor. The sensor is expected to be a promising candidate for room-temperature H2 detection, and the proposed model could be very helpful in promoting the application of the sensor for real-time H2 leakage monitoring.
Humidity and oxygen have significant impacts on the accuracy of hydrogen detection, especially for metal oxide semiconductor sensors at room temperature. Addressing this challenge, this study employs a screen-printed 1 × 2 resistive sensor array made from an identical 1 wt.% platinum-modified tin oxide nanoparticle material. Fabrication variability between the two sensing elements was intentionally leveraged to enhance array output differentiation and information content. Systematic hydrogen-sensing tests were conducted on the array under diverse oxygen and moisture conditions. Three distinct feature types—the steady-state value, resistance change, and area under the curve—were extracted from the output of each array element. These features, integrated with their quotient, formed a nine-feature vector matrix. A multiple linear regression model based on this array output was developed and validated for hydrogen prediction, achieving a coefficient of determination of 0.95, a mean absolute error of 125 ppm, and a mean relative standard deviation of 7.07%. The combined information of the array provided significantly more stable and precise hydrogen concentration predictions than linear or nonlinear models based on individual sensor features. This approach offers a promising path for mass-producing highly interference-resistant, precise, and stable room-temperature hydrogen sensor arrays.