Meile Wu

Prof. Meile Wu

School of Information Science and Engineering, Shenyang University of Technology, Shenyang, Liaoning, China
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2023 in Nanotechnology Reviews
Verified
Journal Article
Open access
PDF file
MLMeng Li
Meng Li
KXKexin Xun
Kexin Xun
XZXinang Zhu
Xinang Zhu
DLDi Liu
Di Liu
XLXi Liu
Xi Liu
MWMeile Wu
Meile Wu
With the great success of graphene, two-dimensional (2D) materials, thanks to their fascinating electronic and optoelectronic properties, have aroused extensive attention among the scientific community. Broad research efforts have proven the enormous potential of 2D materials in optoelectronics, electrochemistry, spintronics, energy storage, catalysis, biomedicine, and many other fields. Driven by the promising applications of 2D materials, there has been an emerging trend toward nanofabricating 2D materials with customized parameters, which are essential for tailor-making controllable artificial nanostructures used in building sophisticated 2D material systems. As the most commonly used solid probe lithography technique, atomic force microscopy (AFM) integrates visualization and multi-mode fabrication within one system, demonstrating its superior capability in the nanofabrication of 2D materials. In view of this, in this review article, we offer a brief introduction to how AFM nanofabrication works and the classification of AFM nanofabrication techniques by the tip-sample surface interaction. Following that, we discuss the results of 2D material nanofabrication by mechanical, thermal, electrical, and other AFM techniques in which external stimulations are applied on special AFM probes.

14 October 2020 in Discover Nano
Verified
Journal Article
Open access
PDF file
MWMeile Wu
Meile Wu
ZWZhanyu Wu
Zhanyu Wu
XJXiaoshi Jin
Xiaoshi Jin
JLJong-Ho Lee
Jong-Ho Lee
In this work, Pt-doped In2O3 nanoparticles (Pt-In2O3) were inkjet printed on a FET-type sensor platform that has a floating gate horizontally aligned with a control gate for humidity detection at room temperature. The relative humidity (RH)-sensing behavior of the FET-type sensor was investigated in a range from 3.3 (dry air in the work) to about 18%. A pulsed measurement method was applied to the transient RH-sensing tests of the FET-type sensor to suppress sensor baseline drift. An inkjet-printed Pt-In2O3 resistive-type sensor was also fabricated on the same wafer for comparison, and it showed no response to low RH levels (below 18%). In contrast, the FET-type sensor presented excellent low humidity sensitivity and fast response (32% of response and 58 s of response time for 18% RH) as it is able to detect the work-function changes of the sensing material induced by the physisorption of water molecules. The sensing mechanism of the FET-type sensor and the principle behind the difference in sensing performance between two types of sensors were explained through the analysis on the adsorption processes of water molecules and energy band diagrams. This research is very useful for the in-depth study of the humidity-sensing behaviors of Pt-In2O3, and the proposed FET-type humidity sensor could be a potential candidate in the field of real-time gas detection.

29 November 2021 in IEEE Sensors Journal
Verified
Journal Article
Closed access
MWMeile Wu
Meile Wu
ZWZhanyu Wu
Zhanyu Wu
YZYanna Zheng
Yanna Zheng
XJXiaoshi Jin
Xiaoshi Jin
XLXi Liu
Xi Liu
MLMeng Li
Meng Li
In this paper, electrically insulating branched polyethylenimine (PEI) is applied to a field effect transistor (FET) sensor platform for low relative humidity (RH) detection (< 20%) at room temperature. The platform contains horizontally aligned control gate and floating gate, so that PEI is readily formed by simple ink-jet printing process. The electrical properties of the sensor in both dry and humid N 2 are measured. The subthreshold swing, gate leakage current, and off-state drain current are increased by water vapor adsorptions. The mechanism behind the phenomenon is deeply investigated by building an equivalent circuit model of the sensor and molecular simulations of water-vapor adsorptions on PEI. It could be due to the formation of the dipoles on the surface of the PEI layer by the adsorptions of water vapors via hydrogen bonding and the polarization of those dipoles by gate biases. The drain current increases with the rise of relative humidity levels and a relative high response of 137.6% is obtained corresponding to 17.8% RH. The novel sensing principle of the proposed sensor lead a high sensitivity, linearity and resolution to low RH below 20%. This research demonstrates a promising low humidity-level sensing capability of the proposed sensor and the study on the sensing principle is very useful for more gas-sensing applications of polymers based on FET platforms.

26 September 2022 in Sensors
Verified
Journal Article
Open access
PDF file
MWMeile Wu
Meile Wu
ZWZebin Wang
Zebin Wang
WZWu Zhanyu
Wu Zhanyu
PZPeng Zhang
Peng Zhang
SHShixin Hu
Shixin Hu
JLJong-Ho Lee
Jong-Ho Lee
Sensitive H2 sensors at low concentrations and room temperature are desired for the early warning and control of hydrogen leakage. In this paper, a resistive sensor based on Pt-doped In2O3 nanoparticles was fabricated using inkjet printing process. The H2 sensing performance of the sensor was evaluated at low concentrations below 1% at room temperature. It exhibited a relative high response of 42.34% to 0.6% H2. As the relative humidity of 0.5% H2 decreased from 34% to 23%, the response decreased slightly from 34% to 23%. The sensing principle and the humidity effect were discussed. A dynamic current sensing model for dry H2 detection was proposed based on Wolkenstein theory and experimentally verified to be able to predict the sensing behavior of the sensor. The H2 concentration can be calculated within a short measurement time using the model without waiting for the saturation of the response, which significantly reduces the sensing and recovery time of the sensor. The sensor is expected to be a promising candidate for room-temperature H2 detection, and the proposed model could be very helpful in promoting the application of the sensor for real-time H2 leakage monitoring.

24 February 2024 in Chemosensors
Verified
Journal Article
Open access
PDF file
MWMeile Wu
Meile Wu
SHShixin Hu
Shixin Hu
WZWu Zhanyu
Wu Zhanyu
ZWZebin Wang
Zebin Wang
MLMeng Li
Meng Li
JLJong-Ho Lee
Jong-Ho Lee
In this paper, a field effect transistor (FET)-type sensor with Pt-decorated In2O3 (Pt-In2O3) nanoparticles is fabricated for detecting H2 gas at room temperature. A pulsed measurement method is adopted to continuously alternate between pre-biasing the gate and reading the drain current of the FET-type sensor. This method effectively reduces the drift in the sensing signal. It is also found that negative pre-bias voltages can dramatically shorten the recovery time of the sensor after sensing H2, while positive pre-bias voltages have the opposite effect. The H2 sensing performance of the sensor is characterized under the enhancement of a pulsed negative pre-bias. By calculating and comparing the root mean square, signal-to-noise ratio, and detection limit of the sensor under different operating regions, it is found that the sensor has the best sensing performance in the subthreshold region, which is suggested to be the optimum operating region for FET-type sensors. In addition, the presence of oxygen significantly consumes the hydrogen molecules and reduces the room-temperature H2 sensitivity of the sensor. The proposed sensor presents promising H2 sensing properties, and this research could be a guide for the use of FET-type sensors in more gas detection applications.

7 August 2025 in Chemosensors
Verified
Journal Article
Open access
PDF file
MWMeile Wu
Meile Wu
ZWZhixin Wu
Zhixin Wu
HCHefei Chen
Hefei Chen
WZWu Zhanyu
Wu Zhanyu
PZPeng Zhang
Peng Zhang
XJXiaoshi Jin
Xiaoshi Jin
Humidity and oxygen have significant impacts on the accuracy of hydrogen detection, especially for metal oxide semiconductor sensors at room temperature. Addressing this challenge, this study employs a screen-printed 1 × 2 resistive sensor array made from an identical 1 wt.% platinum-modified tin oxide nanoparticle material. Fabrication variability between the two sensing elements was intentionally leveraged to enhance array output differentiation and information content. Systematic hydrogen-sensing tests were conducted on the array under diverse oxygen and moisture conditions. Three distinct feature types—the steady-state value, resistance change, and area under the curve—were extracted from the output of each array element. These features, integrated with their quotient, formed a nine-feature vector matrix. A multiple linear regression model based on this array output was developed and validated for hydrogen prediction, achieving a coefficient of determination of 0.95, a mean absolute error of 125 ppm, and a mean relative standard deviation of 7.07%. The combined information of the array provided significantly more stable and precise hydrogen concentration predictions than linear or nonlinear models based on individual sensor features. This approach offers a promising path for mass-producing highly interference-resistant, precise, and stable room-temperature hydrogen sensor arrays.