Pet ve cam şişeler genellikle tek kullanımlık malzemeler olduklarından kullanıldıktan sonra uygun olmayan yerlere özensiz bir şekilde atılmaktadır. Pet ve cam şişe atıkları, çevre kirliliğinin önemli sebeplerinden biridir. Ayrıca cam şişelerin orman yangınlarının çıkmasında çok büyük etkileri vardır. Bu nedenlerden dolayı pet ve cam şişelerin tespit edilmesi ve çevreye zarar vermeden toplanması gerekmektedir. İnsansız Hava Araçları (İHA) günümüzde birçok sektörde oldukça yaygın olarak kullanılmaktadır. İHA’ların kullanım alanlarının artması ve geçmişe göre erişiminin kolay olması birçok alanda gelişmenin de önünü açmıştır. Daha az insan gücü kullanılarak daha düşük maliyetlerle birçok sorun çözüme kavuşturulmuştur. Bu çalışmada, İHA’lardan alınan görüntülerdeki pet ve cam şişelerin tespit edilmesi için görüntü işleme teknikleri kullanılmıştır. Yapılan çalışmada öncelikle eğitim için tespit edilecek nesnelerin bulunduğu görüntüler belirlenmiştir. Bu görüntülerde tespit edilmesi istenen nesneler etiketlenmiş, gerekli düzenlemeler yapılarak eğitim ve test verileri elde edilmiştir. Bu veriler kullanılarak YOLOv3 derin öğrenme algoritması ile eğitim gerçekleştirilmiş, elde edilen veriler ile nesne tespit test işlemi yapılmıştır. Bu test işlemi için pet ve cam şişe atıklarının bulunduğu görüntüler kullanılmıştır. Yapılan çalışma sonucunda, doğal ortamlardaki pet ve cam şişelerin büyük bir doğruluk oranı ile tespiti gerçekleştirilmiştir.
1 January 2007 in International Journal of Modelling and Simulation
In this paper, a new control scheme is described for the robust speed control of electrical drives. The proposed control method is based on type-2 fuzzy logic and Sliding Mode Control (SMC) technique. In the design of the proposed controller, Reaching Law Control (RLC) approach—a SMC design method—is used. Takagi-Sugeno-Kang (TSK) fuzzy system and interval type-2 fuzzy sets are preferred due to their suitability for control applications. Non-singleton fuzzification is employed because of its effectiveness on uncertainties. The control performance is tested under inertialfrictional variations and external load torque disturbances. To show the effectiveness of the new control approach, simulation results of the SMC and type-2 fuzzy SMC (T2FSMC) systems are presented together.
31 December 2021 in International Journal of Innovative Engineering Applications
In this study, different control methods for controlling the position and angle values for the quadcopter (UAV) that take off and land vertically are simulated with MATLAB/Simulink. First of all, a mathematical model was created with the Newton-Euler method, taking into account the dynamics of the quadcopter system. The focus of the study is to investigate the appropriate control method for the position control of the quadcopter. For the linear model of the quadcopter system, PID, LQR and Adaptive Control methods, and for the nonlinear model of the quadcopter system. PD Control simulation has been done. The mentioned control methods have been applied to the system and the control of the movement of the system in each axis has been examined. The obtained results are compared with each other to see the performance of the controllers and the most appropriate control method for the quadcopter was determined with comparisons and tracking scenarios.