This study investigates entropy generation in a steady, laminar, magnetohydrodynamic mixed-convection boundary-layer flow of a hybrid Cu–Al2O3/water nanofluid over a heated, slender vertical cylinder subjected to a transverse magnetic field, Joule heating, viscous dissipation and thermal radiation. The governing partial differential equations are reduced to a non-similar system via a local-Reynolds-number similarity transformation and solved using a finite-difference collocation boundary-value method (bvp4c) combined with -continuation and a second-level local non-similarity formulation. The model is validated against previously published results with deviations of about 2% over the range of curvature considered. Results show that the applied magnetic field decelerates the flow and increases the local entropy generation, while increased buoyancy accelerates the flow and enhances wall heat transfer. Thermal radiation and Joule heating both thicken the thermal boundary layer. Quantitatively, as the radiation parameter increases from 0 to 2, the local Nusselt number rises from 0.9283 to 2.4103 (at ); as the Richardson number increases from 0 to 2, the skin-friction coefficient rises from 0.9477 to 1.7798. The Brinkman number is identified as the dominant parameter controlling the balance between heat transfer and Joule irreversibility, as quantified through the entropy generation number and the Bejan number. These findings provide guidance for the thermal design and second-law optimization of MHD hybrid-nanofluid systems operating over curved geometries.
17 March 2025 in International Journal of Computational and Experimental Science and Engineering
Cement industry generates a serious problem for the environment. Its production, through the calcination of limestone rocks and the energy used, releases a significant amount of carbon dioxide, contributing to the greenhouse effect. Finding solutions to reduce the quantity of cement necessary for the manufacture of mortar can minimize energy consumption, reduce pollution and thus preserve the environment. The aim of this experimental work was to partially replace the cement with bentonite in mortars at varying percentages of 0%, 5%, 10%, 15%, 20%, 25%, and 30%. The effects of bentonite on mechanical strengths, such as compressive and flexural strengths, as well as on thermal performance by assessing the thermal conductivity coefficient were investigated. The experimental results showed that the partial replacement of cement with bentonite significantly improved the thermal insulation of mortars, since the thermal conductivity decreased from 1.59 to 1.29w/mK. However, the mechanical strengths decreased slightly as the bentonite content increased until 15% replacement. Beyond 15% replacement of cement with bentonite, the compressive and flexural strengths decrease abruptly. Finally, the durability of the mortar with bentonite is critical since water absorption increases.