Osamu Kamiya

Prof. Osamu Kamiya


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 October 2018 in Metals
Verified
Journal Article
Open access
PDF file
TPTim Pasang
Tim Pasang
SPStevin Pramana
Stevin Pramana
MKMichael Kracum
Michael Kracum
WMWojciech Misiolek
Wojciech Misiolek
MAMona Aziziderouei
Mona Aziziderouei
OKOsamu Kamiya
Osamu Kamiya
A series of trials to fusion weld commercially pure titanium (CPTi) to stainless steel 304 (SS304) have been conducted using laser beam welding (LBW) and gas tungsten arc welding (GTAW). Neither technique produced adequate weld joints with LBW showing a more promising result, while GTAW yielded separation of the workpieces immediately after welding. Cracking and fracturing took place mainly on the SS304 side, which was explained by the differences in the materials’ thermal properties. Various intermetallic phases formed during welding that were identified using energy dispersive X-ray spectroscopy (EDS) and electron backscattered diffraction (EBSD) technique and were compared with an isothermal ternary phase diagram of Fe-Cr-Ti. Their corresponding hardness values are reported and correlated with alloy compositions.

1 January 2014 in International Journal of the Society of Materials Engineering for Resources
Verified
Journal Article
Closed access
MTMamoru Takahashi
Mamoru Takahashi
TPTim Pasang
Tim Pasang
PCPatrick Conor
Patrick Conor
HOHirotaka Ono
Hirotaka Ono
KTKiyoshi Tanaka
Kiyoshi Tanaka
OKOsamu Kamiya
Osamu Kamiya

11 August 2022 in Materials
Verified
Journal Article
Open access
PDF file
OKOsamu Kamiya
Osamu Kamiya
MTMamoru Takahashi
Mamoru Takahashi
YMYasuyuki Miyano
Yasuyuki Miyano
SIShinichi Ito
Shinichi Ito
MNMasanobu Nakatsu
Masanobu Nakatsu
TKTakashi Kazumi
Takashi Kazumi
This study demonstrates that a single-crystal diamond substrate can be cut along designed lines using the diamond-saw-wire cutting method. We developed an original saw-wire fixed diamond-grain using a bronze solder with a high melting temperature. We created a unique product machine system with a high vacuum furnace and a bronze solder that contains a metallic compound. The diamond cutting mechanism employed in this study is based on the mild wear phenomenon, owing to the friction between the diamond surfaces. A linear relationship between the cutting length and wire feed distance was observed. The relationship can be approximated as y = 0.3622x, where y (μm) is the cutting depth and x (km) is the wire feed distance. The life of the saw-wire was longer than that of the 6000 km wire feed distance and was tested by reciprocating an 8-m short wire at a speed, tension, and cutting force of 150 m/min, 1 N, and 0.2 N, respectively. A single crystal diamond substrate could be cut along the designed line, which was more than 2 mm long. The cutting speed was maintained constant at 0.36 μm/km.

7 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
OKOsamu Kamiya
Osamu Kamiya
MTMamoru Takahashi
Mamoru Takahashi
YMYasuyuki Miyano
Yasuyuki Miyano
SIShinichi Ito
Shinichi Ito
KMKenji MURATA
Kenji MURATA
YIYuichi Iwama
Yuichi Iwama
This study investigated a new dismantling system for concrete structures using a steam pressure cracking agent. We improved the mechanical systems such that it can drill through reinforcing steel bars. Therefore, the control method of the system and shape of the drill tip were improved. When the drill tip is stuck with chips and stopped, it is automatically pulled out and reinserted to recover the rotation. By changing the tip angle of the drill bit from 75° to 90°, it became possible to cut reinforcing bars, which were difficult to cut previously. In addition, we designed a crawler-type mechanical system and improved it such that it can be moved to the appropriate position and operated at any angle. This study revealed that the energy required for the drilling process accounts for more than 90% of the total dismantling energy. Through experiments using an impact hammer drill and observations of fracture surfaces using a three-dimensional scanner, we analysed the characteristics of reinforced concrete. In addition, the feasibility of the design for dismantling reinforced concrete was confirmed based on the determined energy associated with crack propagation.

20 May 2024 in Journal of the Society of Materials Engineering for Resources of Japan
Verified
Journal Article
Open access
PDF file
KNKouta Nagao
Kouta Nagao
TMTatsuya Miyota
Tatsuya Miyota
HMHiroyuki Mizuma
Hiroyuki Mizuma
MNMasanobu Nakatsu
Masanobu Nakatsu
YIYuichi Iwama
Yuichi Iwama
OKOsamu Kamiya
Osamu Kamiya
In a series of experiments on a demolition system using a steam pressure cracking(SPC)agent were conducted. The results were obtained by drilling 11 mm diameter(D10 class)rebar in concrete using three types of rake angle bits at the tip of a small rock drill with a power of 2.24 kW (Compressed Air power). The rebar could be pierced by the rock drill a time of 730~1020 seconds. Thus, it was confirmed that it is possible to process holes for SPC for concrete demolition with reinforcing bars. However, a drilling speed of rebar was about one-fi ftieth of concrete. Observing the steel chips, there are two types of drilling mechanisms. One is a drilling mechanism in which the rebar undergoes compressive deformation at the tip of the bit, and microscopic chips are discharged at the tip of the bit with each impact. The chips are not more than 1 mm wide. The second is to discharge macro chips of several millimeters in size, and the entire rebar is subjected to compressive deformation and because of multiple impacts from the end of the rebar, drilling proceeds in steps.

1 January 2026 in International Journal of the Society of Materials Engineering for Resources
Verified
Journal Article
Open access
PDF file
HMHiroyuki Mizuma
Hiroyuki Mizuma
MNMasanobu Nakatsu
Masanobu Nakatsu
TMTatsuya Miyota
Tatsuya Miyota
KNKota Nagao
Kota Nagao
RNRyota Namiki
Ryota Namiki
OKOsamu Kamiya
Osamu Kamiya
Scratching tests of a diamond substrate were performed using a tool fixed with four types of grains potentially harder than diamond. Materials reported by other researchers to be harder than diamonds often contain combinations of carbon, boron, and nitrogen. From the viewpoint of manufacturing, fullerene, wurtzite (hexagonal lattice boron nitride), polycrystalline diamond, and flame-synthesized diamond were selected in this study. After creating and testing saw wires and wheel saws, flame combustion synthetic diamond was determined to be the most promising. This is because only scratches from flame combustionsynthesized diamond initiate cleavage fracture.