Weike Liu

Dr. Weike Liu


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 November 2026 in Electronics
Verified
Journal Article
Open access
PDF file
JMJinlong Ma
Jinlong Ma
WLWeike Liu
Weike Liu
WWWenxun Wei
Wenxun Wei
XCXin Chen
Xin Chen
DQDanfeng Qiu
Danfeng Qiu
DZDaiyin Zhu
Daiyin Zhu
Single-event upset (SEU) hardening of native D flip-flops (DFFs) in flash-based field-programmable gate arrays (FPGAs) lacks unified experimental conditions and quantitative selection criteria; this work implements six DFF structures on one and the same A3PE3000 chip as identical dual 243-bit shift-register test chains. These include an unhardened baseline DFF (BL-DFF), a conventional triple-modular-redundancy DFF (TMR-DFF), three delay-filtering TMR-DFF variants (DF-TMR-DFF), and one dual-path combinational-logic-replica TMR-DFF (DCLR-TMR-DFF). Realized DF-TMR-DFF filtering windows are set by on-chip process–voltage–temperature (PVT) calibration rather than nominal design values. Six heavy-ion species are used, with linear energy transfer (LET) of 4.4–82.06 MeV·cm2/mg, and irradiation data are processed through a five-stage procedure to remove terminal output-stage single-event transients (SETs) and retain genuine bit-cell upsets. All cross-sections are normalized per logic bit (one complete instance) rather than per storage cell. At the highest LET, the DCLR-TMR-DFF achieves the lowest cross-section of 8.23 × 10−10 cm2/bit, approximately 1/145 and 1/27 of the BL-DFF and TMR-DFF cross-sections, respectively; the DF-TMR-DFF cross-sections decrease from 1.58 × 10−8 to 2.06 × 10−9 cm2/bit as the filtering windows widen. The proposed analytical model shows that which of the DF-TMR-DFF and the DCLR-TMR-DFF has the lower per-bit VersaTile overhead depends on the delay-stage count relative to the combinational-to-sequential resource ratio ρ0, with measured per-bit overheads from 11 (BL-DFF) to 37 (DCLR-TMR-DFF) VersaTiles. Post-layout static timing analysis (STA) of standalone projects gives maximum frequencies of 59.034, 52.384, and 43.092 MHz for BL-DFF, TMR-DFF, and DCLR-TMR-DFF, and 40.827–32.083 MHz for the DF-TMR-DFF variants, whose radiation-hardness gain comes at the expense of timing performance. No structure is optimal across all three dimensions, and trade-offs are required in design. A four-tier engineering selection boundary is established for 130 nm ProASIC3 space circuits. All TMR-based structures share an inherent single-point vulnerability at the terminal three-input majority voter.