A flexible three-in-one microsensor integrating voltage, current, and temperature sensing functions was developed on a polyimide substrate using micro-electro-mechanical systems technology. Sea Energe cleaning agent B, an aqueous formulation containing mineral-derived ionic components and additives, was evaluated as an alternative to conventional organic-solvent cleaning for polyimide substrate pretreatment. The effects of substrate cleaning, Au electrode thickness, and protective-layer thickness were examined using a Taguchi L4 orthogonal array. Four microsensors, with one device per configuration, were calibrated before and after thermal aging at 150 °C for 200 h. Separate immersion tests were conducted in deionized water and undiluted commercial sulfuric acid with a supplier-specified concentration of 96%. Baseline resistance shifts ranged from 0.254% to 0.797%, and mean absolute temperature deviations ranged from 1.12 to 3.20 °C. Sensor 1, combining conventional organic-solvent cleaning, a 0.3 μm Au electrode, and a 25 μm protective layer, exhibited the smallest changes. Descriptive factor-level comparisons associated electrode thickness with the largest differences in both aging metrics. Separate microsensors prepared using the two cleaning processes provided continuous local voltage, current, and temperature signals during 20 h of proton exchange membrane water electrolyzer operation. These results identify a promising fabrication configuration and demonstrate embedded multiparameter sensing under the investigated conditions, providing a basis for further reliability evaluation.