Soft fingertips have shown significant adaptability for grasping a wide range of object shapes, thanks to elasticity. This ability can be enhanced to grasp soft, delicate objects by adding touch sensing. However, in these cases, the complete restraint and robustness of the grasps have proved to be challenging, as the exertion of additional forces on the fragile object can result in damage. This letter presents a novel soft fingertip design for delicate objects based on the concept of embedded air cavities, which allow the dual ability of tactile sensing and active shape-changing. The pressurized air cavities act as soft tactile sensors to control gripper position from internal pressure variation; and active fingertip deformation is achieved by applying positive pressure to these cavities, which then enable a delicate object to be kept securely in position, despite externally applied forces, by form closure. We demonstrate this improved grasping capability by comparing the displacement of grasped delicate objects exposed to high-speed motions. Results show that passive soft fingertips fail to restrain fragile objects at accelerations as low as 0.1 m/s 2 , in contrast, with the proposed fingertips delicate objects are completely secure even at accelerations of more than 5 m/s 2 .
10 February 2020 in IEEE Robotics and Automation Letters
While the grasping capability of robotic grippers has shown significant development, the ability to manipulate objects within the hand is still limited. One explanation for this limitation is the lack of controlled contact variation between the grasped object and the gripper. For instance, human hands have the ability to firmly grip object surfaces, as well as slide over object faces, an aspect that aids the enhanced manipulation of objects within the hand without losing contact. In this letter, we present a parametric, origami-inspired thin surface capable of transitioning between a high friction and a low friction state, suitable for implementation as an epidermis in robotic fingers. A numerical analysis of the proposed surface based on its design parameters, force analysis, and performance in in-hand manipulation tasks is presented. Through the development of a simple two-fingered two-degree-of-freedom gripper utilizing the proposed variable-friction surfaces with different parameters, we experimentally demonstrate the improved manipulation capabilities of the hand when compared to the same gripper without changeable friction. Results show that the pattern density and valley gap are the main parameters that effect the in-hand manipulation performance. The origami-inspired thin surface with a higher pattern density generated a smaller valley gap and smaller height change, producing a more stable improvement of the manipulation capabilities of the hand.
Soft grippers due to their highly compliant material and self-adaptive structures attract more attention to safe and versatile grasping tasks compared to traditional rigid grippers. However, those flexible characteristics limit the strength and the manipulation capacity of soft grippers. In this paper, we introduce a hybrid-driven gripper design utilizing origami finger structures, to offer adjustable finger stiffness and variable grasping range. This gripper is actuated via pneumatic and cables, which allows the origami structure to be controlled precisely for contraction and extension, thus achieving different finger lengths and stiffness by adjusting the cable lengths and the input pressure. A kinematic model of the origami finger is further developed, enabling precise control of its bending angle for effective grasping of diverse objects and facilitating in-hand manipulation. Our proposed design method enriches the field of soft grippers, offering a simple yet effective approach to achieve safe, powerful, and highly adaptive grasping and in-hand manipulation capabilities.
22 October 2021 in The International Journal of Robotics Research
We introduce a reconfigurable underactuated robot hand able to perform systematic prehensile in-hand manipulations regardless of object size or shape. The hand utilizes a two-degree-of-freedom five-bar linkage as the palm of the gripper, with three three-phalanx underactuated fingers, jointly controlled by a single actuator, connected to the mobile revolute joints of the palm. Three actuators are used in the robot hand system in total, one for controlling the force exerted on objects by the fingers through an underactuated tendon system, and two for changing the configuration of the palm and, thus, the positioning of the fingers. This novel layout allows decoupling grasping and manipulation, facilitating the planning and execution of in-hand manipulation operations. The reconfigurable palm provides the hand with a large grasping versatility, and allows easy computation of a map between task space and joint space for manipulation based on distance-based linkage kinematics. The motion of objects of different sizes and shapes from one pose to another is then straightforward and systematic, provided the objects are kept grasped. This is guaranteed independently and passively by the underactuated fingers using a custom tendon routing method, which allows no tendon length variation when the relative finger base positions change with palm reconfigurations. We analyze the theoretical grasping workspace and grasping and manipulation capability of the hand, present algorithms for computing the manipulation map and in-hand manipulation planning, and evaluate all these experimentally. Numerical and empirical results of several manipulation trajectories with objects of different size and shape clearly demonstrate the viability of the proposed concept.
27 March 2019 in IEEE Robotics and Automation Letters
Contact models for soft fingertips are able to precisely compute deformation when information about contact forces and object position is known, thus improving the traditional soft finger contact model. However, the functionality of these approaches for the study of in-hand manipulation with robot hands has been shown to be limited, since the location of the manipulated object is uncertain due to compliance and closed-loop constraints. This paper presents a novel, tractable approach for contact modelling of soft fingertips in within-hand dexterous manipulation settings. The proposed method is based on a relaxation of the kinematic equivalent of point contact with friction, modelling the interaction between fingertips and objects as joints with clearances rather than ideal instances, and then approximating clearances via affine arithmetic to facilitate computation. These ideas are introduced using planar manipulation to aid discussion, and are used to predict the reachable workspace of a two-fingered robot hand with fingertips of different hardness and geometry. Numerical and empirical experiments are conducted to analyse the effects of soft fingertips on manipulation operability; results demonstrate the functionality of the proposed approach, as well as a trade-off between hardness and depth in soft fingertips to achieve better manipulation performance of dexterous robot hands.
10 January 2024 in IEEE Robotics and Automation Letters
This letter introduces a new type of soft continuum robot, called SCoReS, which is capable of self-controlling continuously its curvature at the segment level; in contrast to previous designs which either require external forces or machine elements, or whose variable curvature capabilities are discrete—depending on the number of locking mechanisms and segments. The ability to have a variable curvature, whose control is continuous and independent from external factors, makes a soft continuum robot more adaptive in constrained environments, similar to what is observed in nature in the elephant's trunk or ostrich's neck for instance which exhibit multiple curvatures. To this end, our soft continuum robot enables reconfigurable variable curvatures utilizing a variable stiffness growing spine based on micro-particle granular jamming for the first time. We detail the design of the proposed robot, presenting its modeling through beam theory and FEA simulation—which is validated through experiments. The robot's versatile bending profiles are then explored in experiments and an application to grasp fruits at different configurations is demonstrated.