Global Navigation Satellite System (GNSS) provides all-weather, precise Position, Velocity and Timing (PVT) solutions from any point on the surface or near to the surface of the earth. Accuracy and global availability of solutions are the major important attributes for popularization of the system. Currently, various global and regional system (GPS, GLONASS, Galileo, Beidou, NavIC and QZSS) are in operation. Most of users of GNSS are concerned about the quality of solution obtained from the receivers including the researchers. In some published literature the precision parameters have been obtained from position solution in UTM coordinate. In this paper an attempt has been made to briefly review such efforts and discuss about the parameters used for such studies for geodetic coordinate (φ, λ, h) system because, most generic and geodetic high cost receivers provide this type of position solution. A new effort is taken up to calculate the precision parameters of GNSS based position solution in geodetic coordinate reviewing the previously reported literature. The formulas are reviewed and implemented using MATLAB to develop and utility to calculate precision parameters of satellite-based position solution. A new regional navigation satellite system IRNSS/NavIC, developed by ISRO, India has been deployed. IRNSS/ NavIC data has been analyzed using the developed utility as a case study to observe the effectiveness of such parameters. This discussion and the utility would be useful for understanding the process of GNSS data analysis for studies related to accuracy and precision.
Global Navigation Satellite System (GNSS) provides precise Position, Velocity, and Timing (PVT) information. Various types of receivers of varying cost and complexity are used for collection and use of GNSS data. Currently, cost-effective, compact, low power consuming, multi-constellation enabled, single, or dual-frequency GNSS modules are being increasingly available having the capability of providing modest position solution accuracy. This paper presents the results of GPS, BeiDou, and GPS + BeiDou hybrid positioning capabilities of few commercially available modules based on systematic analysis from data collected during two time periods from two locations of India using geodetic and commercial patch antennas w.r.t. the reference points created through PPP (Precise Point Positioning). The results are compared with those provided a survey-grade GNSS receiver. It is witnessed that, selected single frequency module can provide 3–4 m 2DRMS (Distance Root Means Square) precision and their dual frequency counterparts can provide 2DRMS solution precision around 3 m in GPS-only operation, around 7 m in BeiDou-only operation and around 3.5 m in case of GPS + BeiDou hybrid operation. The performance of the compact modules clearly presents the cost-performance benefit of the compact modules for real-time applications and the results of this study would help in understanding the capabilities of these modules for mass-market applications.
For GNSS Real-Time Kinematic (RTK), the reference Base receiver operating at a precise location together with the wirelessly connected Rover receiver(s) provide(s) high-quality real-time position solutions. This work shows the potential of compact, low-cost, single-frequency (CLS) GNSS modules as the RTK Rover up to large baseline distances. A combination of the uBLOX M8T CLS module and the Tallysman TW2710 patch antenna is used in single and hybrid GNSS combinations for short-to-long single-baseline lengths with the open-source RTKLib as the processing software. The results show that, for up to 288 km baseline distance, GPS, GLONASS and Galileo standalone operation provides below 1, 3 and 2 m precisions, respectively and sub-0.5 m precision is achieved for GPS+GLONASS+Galileo and GPS+Galileo+QZSS operations. The work shows the advantages of CLS modules as Rover those exploits the multi-constellation signal availability from India using open-source RTK processing software for reduction of the overall RTK infrastructure cost.