17 November 2019 in Journal of Information and Optimization Sciences
Global Navigation Satellite System (GNSS) provides all-weather, precise Position, Velocity and Timing (PVT) solutions from any point on the surface or near to the surface of the earth. Accuracy and global availability of solutions are the major important attributes for popularization of the system. Currently, various global and regional system (GPS, GLONASS, Galileo, Beidou, NavIC and QZSS) are in operation. Most of users of GNSS are concerned about the quality of solution obtained from the receivers including the researchers. In some published literature the precision parameters have been obtained from position solution in UTM coordinate. In this paper an attempt has been made to briefly review such efforts and discuss about the parameters used for such studies for geodetic coordinate (φ, λ, h) system because, most generic and geodetic high cost receivers provide this type of position solution. A new effort is taken up to calculate the precision parameters of GNSS based position solution in geodetic coordinate reviewing the previously reported literature. The formulas are reviewed and implemented using MATLAB to develop and utility to calculate precision parameters of satellite-based position solution. A new regional navigation satellite system IRNSS/NavIC, developed by ISRO, India has been deployed. IRNSS/ NavIC data has been analyzed using the developed utility as a case study to observe the effectiveness of such parameters. This discussion and the utility would be useful for understanding the process of GNSS data analysis for studies related to accuracy and precision.
1 May 2019 in Advances In Space Research
23 June 2021 in IETE Journal of Research
Global Navigation Satellite System (GNSS) provides precise Position, Velocity, and Timing (PVT) information. Various types of receivers of varying cost and complexity are used for collection and use of GNSS data. Currently, cost-effective, compact, low power consuming, multi-constellation enabled, single, or dual-frequency GNSS modules are being increasingly available having the capability of providing modest position solution accuracy. This paper presents the results of GPS, BeiDou, and GPS + BeiDou hybrid positioning capabilities of few commercially available modules based on systematic analysis from data collected during two time periods from two locations of India using geodetic and commercial patch antennas w.r.t. the reference points created through PPP (Precise Point Positioning). The results are compared with those provided a survey-grade GNSS receiver. It is witnessed that, selected single frequency module can provide 3–4 m 2DRMS (Distance Root Means Square) precision and their dual frequency counterparts can provide 2DRMS solution precision around 3 m in GPS-only operation, around 7 m in BeiDou-only operation and around 3.5 m in case of GPS + BeiDou hybrid operation. The performance of the compact modules clearly presents the cost-performance benefit of the compact modules for real-time applications and the results of this study would help in understanding the capabilities of these modules for mass-market applications.
14 December 2021 in Radio Science
Geodetic or special purpose Global Navigation Satellite System (GNSS) receivers are used for ionosphere monitoring and research. Dual frequency, compact, low‐cost commercial GNSS modules can provide raw GNSS data and are commonly used for positioning applications. This paper presents the applicability of these compact modules for monitoring ionospheric activities. A comparative study between Javad Triumph LS, a costly geodetic receiver, and an Ublox ZED‐F9P, a low‐cost, dual‐frequency, compact module is carried out to explore the potential of the low‐cost devices for ionosphere probing. Studies are carried out on signal strength values (C/N0) and vertical total electron content (VTEC) values. From the concurrently collected GPS data, a bias of 2.2–4.9 dBHz in signal strength values are observed between the two types of receivers depending on the signal frequency band. The VTEC values calculated from the Ublox module are in close agreement with the values obtained from the Triumph LS receiver. Therefore, the compact module shows the potential for use in ionosphere monitoring with clear advantages in cost, size, and power consumption. However, the signal strength values obtained from such compact modules need to be calibrated using standard GNSS receivers. A GNSS‐based Ionosphere Monitoring Unit (GIMU) is also proposed in this manuscript by the integration of a compact, low‐cost GNSS module with a single‐board computer and a wireless data communication module. Real‐time, cost‐effective, concurrent ionosphere monitoring over a geographically distributed network is possible using a network of such units.
11 January 2023 in IETE Journal of Research
Global Navigation Satellite System (GNSS) sensors are increasingly considered as major sources of precise Position, Navigation, and Timing (PNT) information. Android-based smartphones contain inbuilt GNSS sensors, and they now contribute to a major global GNSS market segment. Various hardware and Android-based applications (App) developments are witnessed to best exploit the current multi-constellation, multi-frequency GNSS environment. Since Android version 7.0 (Nougat) and Location Application Programming Interface (API) 24, recording GNSS raw data in the smartphone became possible. This paper describes the potential of commercial Smartphones and reviews the capabilities of Android Apps for cost-efficient GNSS measurements for the geospatial community and a novel classification of the Apps based on their capabilities and usability. Results on the positioning capability of common smartphones using real-time data show the achievable modest solution precision, and these are suitable for use of the devices in geomatics applications, improved App development, and for IoT-based system and infrastructure development.
6 February 2023 in Journal of the Indian Society of Remote Sensing