To date, the search for creating stable ferrofluids with excellent properties for biomedical application is one of the challenging scientific and practical investigations. In this study, novel Fe3O4/Ag nanohybrid ferrofluids from iron sand were synthesized using a double-layer method. The Fe3O4/Ag nanocomposites exhibited stable crystallite sizes of 11.8 12.1 nm and 36.8–37.2 nm for Fe3O4 and Ag, respectively. The lattice parameters of the spinel structure Fe3O4 and face-centered cubic Ag were respectively 8.344 Å and 4.091 Å. With increasing Ag amount, the crystallite phase of Ag in the nanocomposites increased from 40.2% to 77.2%. The XPS results confirmed that Fe3O4/Ag nanocomposites were successfully prepared, where Fe3O4 mixed well with Ag via strong ionic bonding. The FTIR results confirmed the presence of Fe3O4/Ag, oleic acid, and dimethyl sulfoxide as the filler, first layer, and second layer, respectively. The as-prepared ferrofluids exhibited superparamagnetic behavior, where the saturation magnetization decreased with increasing Ag content. The Fe3O4/Ag nanohybrid ferrofluids exhibited excellent antimicrobial performance against Bacillus subtilis, Staphylococcus aureus, Escherichia coli, and Candida albicans. More importantly, the Fe3O4/Ag nanohybrid ferrofluids decreased the progression of liver fibrosis-related inflammation and fibrogenic activity on hepatic stellate cells.
Ni-M (M = Y or La)-catalyzed hydrogenolysis of furfural (FFR) to produce 1,5-pentanediol (1,5-PeD) has been developed through the formation of tetrahydrofurfuryl alcohol (THFA) as an intermediate product. Ni(0)-Y2O3 or Ni(0)-La(OH)3 composite catalysts executed cleavage of the C–O bond of THFA, giving 1,5-PeD with remarkably high selectivity. Consecutive reactions including hydrogenation of the C=O and C=C bonds and subsequent hydrogenolysis of the C–O bond were performed.
The microstructure of bacterial cellulose nanofibers (BCNs) film affects its characteristic. One of several means to engineer the microstructure is by changing the BCNs size and fiber distribution through a high-pressure homogenizer (HPH) process. This research aimed to find out the effects of repetition cycles on HPH process towards BCNs film characteristics. To prepare BCNs films, a pellicle from the fermentation of pineapple peels waste with Acetobacter xylinum (A. xylinum) was extracted, followed by crushing the pellicle with a high-speed blender, thereafter, homogenized using HPH at 150 bar pressure with variations of 5, 10, 15, and 20 cycles. The BCNs films were then formed through the casting process and drying in the oven at 60°C for 8 h followed by structural, morphological, and optical properties investigation using X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectrometer along with BCNs films porosity, tensile and roughness test. The research showed that the effect of HPH cycle on BCNs resulted in the highest film tensile strength by 109.15 MPa with the lowest surface roughness (Ra) of 0.93 ± 0.10 µm at 10 cycles. The HPH process is effective in controlling BCNs film porosity level. The HPH cycles influence the crystalline index and crystallite size, slightly.
A Ni-Y2O3 catalyst containing ruthenium (Ru/Ni-Y2O3) was synthesized and applied to the hydrogenolysis of tetrahydrofurfuryl alcohol (THFA) to produce 1,5-pentanediol (1,5-PeD), which showed superior catalytic performance over that of the Ni-Y2O3 catalyst itself. The optimized ruthenium-containing catalyst, which was prepared by impregnation of 1.0 wt % ruthenium in Ni-Y2O3, showed high catalytic activity for producing 1,5-PeD, giving an 86.5% yield at 93.4% conversion of THFA under 2.0 MPa of H2 at 423 K after 40 h. The formation of Ru-Ni0-Y2O3 boundaries was proposed to accelerate the C–O bond scission of the tetrahydrofuran ring to give 1,5-PeD.