In order to provide a complete solution for designing and analyzing the axial flux permanent magnet synchronous motor (AFPMSM) for electric vehicles, this paper covers the electromagnetic design and multi-physics analysis technology of AFPMSM in depth. Firstly, an electromagnetic evaluation method based on an analytical algorithm for efficient evaluation of AFPMSM was studied. The simulation results were compared with the 3D electromagnetic field simulation results to verify the correctness of the analytical algorithm. Secondly, the stator core was used to open the auxiliary slot to optimize the torque ripple of the AFPMSM, which reduced the torque ripple peak-to-peak value by 2%. From the perspective of ensuring the reliability, safety, and driving comfort of the traction motor in-vehicle working conditions, multi-physics analysis software was used to analyze and check the vibration and noise characteristics and temperature rise of several key operating conditions of the automotive AFPMSM. The analysis results showed that the motor designed in this paper can operate reliably.
In this paper, a sliding mode vector control system based on collaborative optimization of an axial flux permanent magnet synchronous motor (AFPMSM) for an electric vehicle is proposed. In order to increase the high efficiency range of electric vehicles and improve the cruising range, a collaborative optimization control strategy is firstly proposed. Due to the use of a dual stator-single rotor AFPMSM, the multi-motor efficiency optimization map and torque cooperative control are used to realize the working mode conversion of single stator and double stator, and the torque ripple caused by the working mode conversion is improved by fuzzy control. In order to improve the torque tracking capability, speed limiting characteristics, and operating characteristics, a speed limit and current vector control strategy based on a sliding mode controller is proposed and studied. The dynamic performance of electric vehicles is improved by a sliding mode vector control. Finally, a drive control system was developed for the proposed control strategy, and the complete vehicle test was carried out. The collaborative optimization control experiment and torque tracking and speed limiting experiments verify the correctness and effectiveness of the proposed control strategy. The acceleration performance and endurance experiments show that the proposed control strategy can effectively improve the cruising range and the acceleration performance of electric vehicles.
10 October 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
To achieve robust control against parameter variations for dual three-phase permanent magnet synchronous motor (DTP-PMSM), an improved model-free predictive current control (MFPCC) based on the ultra-local model is proposed in this paper. First, the parameter mismatch on conventional predictive control is analyzed, and it’s worth noting that the back-electromotive force (back EMF) harmonics have a huge impact on the current harmonics. Therefore, unlike the conventional schemes, the ultra-local model considering back EMF harmonics is employed to replace the fundamental and harmonic subspace current prediction models. Then, to meet the fast response and reduce chattering, a slide mode observer (SMO) based on improved reaching law is designed to estimate the disturbance and currents. And 12 virtual voltage vectors are synthesized for further suppressing currents in harmonic subspace. Finally, simulation and experimental results both show that the proposed method has the preferable robust performance and can reduce the phase current harmonics under parameter mismatches.
In order to improve the cruising range of electric bus, this paper studies the deadbeat current prediction vector control system of axial flux permanent magnet synchronous motor (AFPMSM) for electric bus based on the optimal torque distribution method. Firstly, the mathematical model of the three stators-double rotors AFPMSM is established. Secondly, in order to improve the high efficiency range, the efficiency optimal torque distribution method is proposed based on the average torque distribution method and the back propagation (BP) neural network is used to find the optimal torque distribution method. Then a current control strategy based on deadbeat current prediction control is proposed to improve the torque tracking characteristics. Finally, a drive control system is developed for the proposed control strategy, and experimental research and vehicle testing are carried out. The experimental results show that the BP neural network-based torque distribution method designed in this paper increases the high efficiency range of the drive system and improves the cruising range of the electric bus. The drive system using a current controller based on deadbeat current prediction control exhibits good dynamic and steady state performance.
11 June 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
A predictive current control with parameter robustness (PR-PCC) method of permanent magnet synchronous motor (PMSM) is proposed in this article. First, a cost function is designed to calculate the increment of the optimal voltage vector at the current instant, which is based on incremental PMSM model. The incremental PMSM model is used to eliminate the influence of the motor flux parameter. Second, the optimal voltage vector that minimizes the cost function is obtained by combining the increment of the optimal voltage vector with the idea of iteration. At the same time, a current observer based on the incremental model is designed to compensate one-step sampling delay. In this way, the feedback current of $dq$ -axis accurately followed the reference current. In comparison with the conventional pulse width modulation predictive current control (PWM-PCC) method, the proposed method can significantly reduce the steady-state error of $dq$ -axis current caused by inductance, flux, and resistance parameters mismatch quickly. Finally, experimental results of the proposed method and the conventional PWM-PCC are presented in this article to verify the validity of the proposed method.
In this paper, an adaptive robust drive control system for an axial flux permanent magnet synchronous motor of an electric medium-sized bus based on the optimal torque distribution method is studied. The drive control system is mainly divided into two parts. First, a torque distribution method is proposed. The optimal torque distribution method based on particle swarm optimization algorithm is used to increase the high efficiency interval of the system and apply it to the energy feedback braking. Secondly, in order to reduce the nonlinear disturbance of the system and improve the accuracy of the unified control, this paper models and studies the vector system based on adaptive robust control. Finally, the whole drive control system is modeled, simulated and experimented. The simulation and experimental results show that the torque distribution method proposed in this paper can effectively increase the high-efficiency running time of the electric medium bus, and improve the shortcomings of insufficient mileage of the electric medium-sized bus. The use of a current controller based on adaptive robust control improves the control accuracy of the drive system and can effectively suppress the disturbances generated by it.