The solid oxide fuel cell (SOFC) system is complicated because the characteristics of gas, heat, and electricity are intricately coupled. During the operation of the system, problems such as frequent failures and a decrease in the stack’s performance have caused the SOFC system to work less well and greatly shortened the SOFC’s practical life. As such, it is essential to accurately forecast its remaining useful life (RUL) to make the system last longer and cut down on economic losses. In this study, both model-based and data-driven prediction methods are used to make predictions about the RUL of SOFC. First, the linear degradation model of the SOFC system is established by introducing degradation resistance as the index of health status. Using the Kalman filtering (KF) method, the health status of SOFC is evaluated online. The results of the health state estimation indicated that the KF algorithm is accurate enough to provide a good basis for the model-based RUL prediction. Then, a long short-term memory (LSTM) network-recursive (data-driven) method is presented for RUL prognostics. The multi-step-ahead recursive strategy of updating the network state with actual test data improves the prediction accuracy. Finally, a comparison is made between the LSTM network prediction approach suggested and the model-based KF prognostics. The results of the experiments indicate that the LSTM network is more suitable for RUL prediction than the KF algorithm.
7 June 2022 in Journal of Dynamic Systems, Measurement, and Control
An appropriate register control method for a roll-to-roll (R2R) printing system must achieve not only high register accuracy but also the smoothness of the control signal and simple implementation. This paper compares recent register control approaches, i.e., model-based feed-forward proportional differential (MFPD), direct-decoupling proportional differential (DDPD) control, and fully decoupled proportional differential (FDPD) control, with three main performance indexes including register accuracy, implementation difficulty and smoothness of control signal. The mutual conversion between the different defined register errors in the three control methods is derived, so that the different defined register errors can be reciprocally transformed. According to the proposed mutual conversion analysis, the most appropriate conditions for using the three decoupling control methods are provided, which is very useful for the control method selection in industrial applications. Experiments and comparison are carried out to demonstrate the effectiveness of the proposed mutual conversion, which verify the derived most appropriate conditions of the three decoupling control methods.
The development of hydrogen energy is an effective solution to the energy and environmental crisis. Hydrogen fuel cells and energy storage cells as hybrid power have broad application prospects in the field of vehicle power. Energy management strategies are key technologies for fuel cell hybrid systems. The traditional optimization strategy is generally based on optimization under the global operating conditions. The purpose of this project is to develop a power allocation optimization method based on real-time load forecasting for fuel cell/lithium battery hybrid electric vehicles, which does not depend on specific working conditions or causal control methods. This paper presents an energy-management algorithm based on real-time load forecasting using GRU neural networks to predict load requirements in the short time domain, and then the local optimization problem for each predictive domain is solved using a method based on Pontryagin’s minimum principle (PMP). The algorithm adopts the idea of model prediction control (MPC) to transform the global optimization problem into a series of local optimization problems. The simulation results show that the proposed strategy can achieve a good fuel-saving control effect. Compared with the rule-based strategy and equivalent hydrogen consumption strategy (ECMS), the fuel consumption is lower under two typical urban conditions. In the 1800 s driving cycle, under WTCL conditions, the fuel consumption under the MPC-PMP strategy is 22.4% lower than that based on the ECMS strategy, and 10.3% lower than the rules-based strategy. Under CTLT conditions, the fuel consumption of the MPC-PMP strategy is 13.12% lower than that of the rule-based strategy, and 3.01% lower than the ECMS strategy.
Solid oxide fuel cells (SOFCs) have complex characteristics, including a long time delay, strong thermoelectrical coupling, and multiple constraints. This leads to multiple control objectives, such as efficiently controlling the power output of the stack and considering the temperature constraints of multiple high-temperature components. Dealing with multiple objectives at the same time brings challenges to the design of SOFC system control. Based on the verified high-precision system model and aiming to achieve fast response, high efficiency, and thermal management, this paper first designs a generalized predictive controller (GPC) to realize the global optimization of the system. Then, through the actual test of the individual reformer, the reformer characteristics are analyzed, the standby controller to control the reformer temperature is designed, and the thermoelectric cooperative controller is constricted with the GPC. The results show that while fast power tracking, high efficiency, and multiple temperature constraints are realized by the controller, the temperature and methane conversion rate (MCR) of the reformer are stably controlled, providing a basis for further practical experiments of the SOFC system.