Ссылка для цитирования: Коробов Г.Ю., Парфенов Д.В., Нгуен Ван Тханг. Механизмы образования асфальтосмолопарафиновых отложений и факторы интенсивности их формирования // Известия Томского политехнического университета. Инжиниринг георесурсов. – 2023. – Т. 334. – № 4. – С.103-116. Актуальность работы обусловлена недостаточной изученностью процесса образования отложений парафина на внутренней поверхности нефтепромыслового оборудования. Исследовательский опыт показал противоречивые результаты, что указывает на отсутствие общепринятой теории, описывающей процесс образования парафиновых отложений и влияние различных факторов на интенсивность их формирования. При этом свойства отложений парафина существенно зависят от условий протекания процесса их образования. Соответственно, более точное понимание принципов формирования отложений позволяет прогнозировать их рост и подбирать эффективные способы борьбы с данным осложнением. Цель: рассмотреть основные механизмы образования отложений парафина, а также провести анализ результатов предшествующих работ, посвященных исследованию факторов интенсивности их формирования. Объекты: процесс образования парафиновых отложений на внутренней поверхности нефтепромыслового оборудования и факторы интенсивности их формирования. Методы: выполнение литературного обзора и проработка публикаций в рецензируемых изданиях; анализ, сопоставление результатов предшествующих исследований. Результаты. Описаны основные механизмы образования отложений парафина на внутренней поверхности нефтепромыслового оборудования, такие как: молекулярная диффузия, сдвиговое воздействие, гравитационное осаждение, броуновское движение и термодиффузия. Представлен обзор предшествующих исследований, посвященных оценке вклада указанных механизмов в процесс образования отложений парафина и изучению влияния факторов интенсивности их формирования, таких как: обводненность продукции, режим и скорость потока, газосодержание, компонентный состав нефти и свойства материалов, из которых изготовлено оборудование. Проведенный анализ позволил выявить противоречивые результаты и зависимости, что подтверждает необходимость дальнейшего изучения принципов образования парафиновых отложений на внутренней поверхности нефтепромыслового оборудования.
1 January 2025 in International Journal of Engineering
This paper addresses the issue of paraffin deposits, specifically focusing on the chemical method of prevention. The effectiveness of the inhibitor used in high-wax oil production is contingent upon its injection point, necessitating deeper placement of the reagent within the “oil reservoir-well” system. The objective of this study is to develop a method for long-term wax inhibition and experimentally evaluate the influence of well operation parameters on the rate of inhibitor release into the production fluid. The article outlines a paraffin inhibition technology that involves the injection of solid porous particles into a hydraulic fracture, which serve a dual purpose as both proppant and an inhibitor source. A method has been developed for saturating porous ceramic particles with solid ethylene-vinyl acetate (EVA), which is gradually released into the oil flow when washed by the oil, functioning as a depressant. Filtration experiments indicate that this inhibition method provides a long-term, consistent release of inhibitor into the oil flow. The EVA content in the oil sample filtered through the model proppant pack remains above minimum effective concentration level even after filtration 470 pore volumes. Thereby reducing the frequency of interventions aimed at preventing and removing paraffin deposits within the “oil reservoir-well” system.
The formation of asphalt–resin–paraffin deposits (ARPDs) and gas hydrate deposits (GHDs) in oil wells equipped with electric submersible pumps (ESPs) remains a significant challenge in the oil and gas industry. This study aims to develop an inhibitory technology to prevent these deposits by utilizing the synergistic effect of chemical reagents combined with the optimization of ESP operating parameters. Based on previously published mathematical modeling and laboratory studies by the authors, this work presents the technological implementation of the inhibition system and its economic assessment. Specifically, optimal reagent dosages were calculated considering their synergistic interactions, a periodic injection regime was established, and the impact on the well’s mean time between failures (MTBF) was evaluated. Results demonstrate that optimizing ESP parameters shifts the onset depth of GHD formation by 119.4 m (25%) and ARPD formation by 72.6 m (6%). The application of the selected ARPD inhibitor at 0.055 wt.% reduced the thermodynamic hydrate inhibitor (methanol) dosage by 12.17% and enabled a transition from continuous to periodic methanol injection. Consequently, the predicted MTBF increased from 277 to 419 days (+50%). An eight-year economic analysis showed a positive net present value with a payback period of 14 months. Thus, the proposed technology is recommended for field testing in high-paraffin, low-resin oil fields operating under permafrost conditions.