A novel damage mechanics-based continuous micro-model for the analysis of masonry-walls is presented and compared with other two well-known discrete micro-models. The discrete micro-models discretize masonry micro-structure with nonlinear interfaces for mortar-joints, and continuum elements for units. The proposed continuous micro-model discretizes both units and mortar-joints with continuum elements, making use of a tension/compression damage model, here refined to properly reproduce the nonlinear response under shear and to control the dilatancy. The three investigated models are validated against experimental results. They all prove to be similarly effective, with the proposed model being less time-consuming, due to the efficient format of the damage model. Critical issues for these types of micro-models are analysed carefully, such as the accuracy in predicting the failure load and collapse mechanism, the computational efficiency and the level of approximation given by a 2D plane-stress assumption.Peer ReviewedPostprint (author's final draft

Purpose: The purpose of this paper is to evaluate the possibilities of the particle finite element method for simulation of free surface flows.Design/methodology/approach: A numerical simulation of a number of examples for which experimental data are available is performed. The simulations are run using the same scale as the experiment in order to minimize errors due to scale effects. Some examples are chosen from the civil engineering field: a study of the flow over a flip bucket is analyzed for both 2D and 3D models, and the flow under a planar sluice gate is studied in 2D. Other examples, such as a 2D and 3D “dam break” with an obstacle are taken from the smooth particle hydrodynamics literature.Findings: Different scenarios are simulated by changing the boundary conditions for reproducing flows with the desired characteristics. Different mesh sizes are considered for evaluating their influence on the final solution.Originality/value: Details of the input data for all the examples studied are given. The aim is to identify benchmark problems for future comparisons between different numerical approaches for free surface flows.

In this paper, the so‐called added‐mass effect is investigated from a different point of view of previous publications. The monolithic fluid–structure problem is partitioned using a static condensation of the velocity terms. Following this procedure the classical stabilized projection method for incompressible fluid flows is introduced. The procedure allows obtaining a new pressure segregated scheme for fluid–structure interaction problems, which has good convergent characteristics even for biomechanical application, where the added‐mass effect is strong. The procedure reveals its power when it is shown that the same projection technique must be implemented in staggered FSI methods. Copyright © 2009 John Wiley & Sons, Ltd.