Purpose: The purpose of this paper is to evaluate the possibilities of the particle finite element method for simulation of free surface flows.Design/methodology/approach: A numerical simulation of a number of examples for which experimental data are available is performed. The simulations are run using the same scale as the experiment in order to minimize errors due to scale effects. Some examples are chosen from the civil engineering field: a study of the flow over a flip bucket is analyzed for both 2D and 3D models, and the flow under a planar sluice gate is studied in 2D. Other examples, such as a 2D and 3D “dam break” with an obstacle are taken from the smooth particle hydrodynamics literature.Findings: Different scenarios are simulated by changing the boundary conditions for reproducing flows with the desired characteristics. Different mesh sizes are considered for evaluating their influence on the final solution.Originality/value: Details of the input data for all the examples studied are given. The aim is to identify benchmark problems for future comparisons between different numerical approaches for free surface flows.
8 September 2015 in International Journal for Numerical and Analytical Methods in Geomechanics
In many geomechanics applications, material boundaries are subjected to large displacements and deformation. Under these circumstances, the application of boundary conditions using particle methods, such as the material point method (MPM), becomes a challenging task since material boundaries do not coincide with the background mesh. This paper presents a formulation of penalty augmentation to impose nonhomogeneous, nonconforming Dirichlet boundary conditions in implicit MPM. The penalty augmentation is implemented utilizing boundary particles, which can move either according to or independently from the material deformation. Furthermore, releasing contact boundary condition, as well as the capability to accommodate slip boundaries, is introduced in the current work. The accuracy of the proposed method is assessed in both 2D and 3D cases, by convergence analysis reaching the analytical solution and by comparing the results of nonconforming and classical grid-conforming simulations.
1 August 2015 in International Journal of Geomechanics
This paper aims to present and validate a numerical technique for the simulation of the overtopping and onset of failure in rockfill dams caused by mass sliding. This goal is achieved by coupling a fluid dynamic model for the simulation of the free surface and through-flow problems together with a numerical technique for the calculation of the rockfill response and deformation. Both the flow within the dam body and in its surroundings are taken into account. An extensive validation of the resulting computational method is performed by solving several failure problems on physical models of rockfill dams for which experimental results have been obtained by the authors.