Optical techniques for visualization and quantification of chemical and biological analytes are always highly desirable. Here we show a hyperspectral surface plasmon resonance microscopy (HSPRM) system that uses a hyperspectral microscope to analyze the selected area of SPR image produced by a prism-based spectral SPR sensor. The HSPRM system enables monochromatic and polychromatic SPR imaging and single-pixel spectral SPR sensing, as well as two-dimensional quantification of thin films with the measured resonance-wavelength images. We performed pixel-by-pixel calibration of the incident angle to remove pixel-to-pixel differences in SPR sensitivity, and demonstrated the HSPRM’s capabilities by using it to quantify monolayer graphene thickness distribution, inhomogeneous protein adsorption and single-cell adhesion. The HSPRM system has a wide spectral range from 400 nm to 1000 nm, an optional field of view from 0.884 mm² to 0.003 mm² and a high lateral resolution of 1.2 μm, demonstrating an innovative breakthrough in SPR sensor technology.

A simple and reliable spectrum-retrieval method was proposed for the development of miniature stationary Fourier transform (FT) spectrometers based on a ${\mathrm{LiNbO}}_3$ (LN) waveguide Mach–Zehnder interferometer (MZI) modulator. The method takes into account the wavelength dependence of the optical pathlength difference (OPD) and allows us to use a nonlinear voltage ramp to modulate the OPD. The method is based on the dispersion of the half-wave voltage, which was measured to be a monotonous polynomial function of the wavelength for the LN waveguide MZI used. With the measured dispersion of the half-wave voltage, the OPD, as a linear function of the modulating voltage, can be accurately determined at each wavelength in the near-infrared region in which the MZI used is a single-mode device. A prototype FT spectrometer was prepared using a LN waveguide MZI modulator based on the above method. The experimental results demonstrated that the spectrometer can be used for accurate determination of the laser wavelength and for liquid absorptiometry.

A capillary covered silica hollow core fiber (HCF) has been designed and tested for the measurement of displacement based on antiresonant reflecting optical waveguide. A section of the silica HCF was inserted into a silver coated capillary. A Fabry-Perot resonator can be formed in the silica cladding. The leaky mode of the guided light can be achieved at resonant wavelengths of the Fabry-Perot resonator, which results in lossy dips in the transmission spectrum. The transmission power of the dip is sensitive with the displacement of the capillary since the effective reflectivity of the Fabry-Perot resonator is affected by the location between the capillary and the silica HCF. The experimental results show that the sensitivity of up to 0.578 dB/μm is achieved, and the proposed sensor is insensitive with the temperature.

A tactile sensor is an indispensable component for electronic skin, mimicking the sensing function of organism skin. Various sensing materials and microstructures have been adopted in the fabrication of tactile sensors. Herein, we propose a highly sensitive flexible tactile sensor composed of nanocomposites with pyramid and irregularly rough microstructures and implement a comparison of piezoresistive properties of nanocomposites with varying weight proportions of multi-wall nanotubes and carbon black particles. In addition to the simple and low-cost fabrication method, the tactile sensor can reach high sensitivity of 3.2 kPa⁻¹ in the range of <1 kPa and fast dynamic response of 217 ms (loading) and 81 ms (recovery) at 40 kPa pressure. Moreover, body movement monitoring applications have been carried out utilizing the flexible tactile sensor. A sound monitoring application further indicates the potential for applications in electronic skin, human–computer interaction, and physiological detection.