We consider using toroidal curved detectors to improve the performance of imaging optical systems. We demonstrate that some optical systems have an anamorphic field curvature. We consider an unobscured reimaging three-mirror anastigmat as an example (, , ). By assuming that the image is focused on a toroidal detector surface and performing reoptimization, it becomes possible to obtain a notable gain in the image quality—up to 40% in terms of the spot root mean square radius. Through analytic computations and finite-element analysis, we demonstrate that this toroidal shape can be obtained by bending of a thinned detector in a relatively simple setup.
Optics for astronomy implies powerful developments of active and adaptive optics methods applied to instrumentation from X-rays to the near infrared for the design of telescopes, spectrographs, and coronagraph planet finders. This presentation particularly emphasizes the development of active optics methods. Highly accurate and remarkably smooth surfaces from active optics methods allow new optical systems that use highly aspheric and non-axisymmetric – freeform – surfaces. Depending on the goal and performance required for a deformable optical surface, elasticity theory analysis is carried out either with small deformation thin plate theory, large deformation thin plate theory, shallow spherical shell theory, or the weakly conical shell theory. A mirror thickness distribution is then determined as a function of associated bending actuators and boundary conditions. For a given optical shape to generate, one searches for optical solutions with a minimum number of actuators.
The three-mirror Rumsey telescope is a flat field anastigmat. Compared to the curved field Schmidt telescope, its compactness and full achromaticity are particularly interesting features for potential CCD mosaics. In counterpart the difficulties involved in aspherizing the three mirrors explain the fact that no such telescope is presently being built for larger sizes than 30-cm primaries. This paper provides solutions to this problem via active optics methods; it considers the case where the tertiary is linked in a continuous geometry to the primary, both mirrors being aspherized from a same sphere. The optical and elasticity designs of a 1-meter telescope are presented. The active aspherization can be achieved as well by stress polishing as in situ at the telescope.
Elasticity theory and active optics led us to the discovery of three geometrical configurations of variable curvature mirrors (VCMs) that are either cycloid-like or tulip-like thickness distributions. Cycloid-like VCMs are generated by a uniform load—air pressure—applied over the mirror rear surface, and reacts without any bending moment along its circular contour. This particular VCM configuration is of practical interest because it smoothly generates accurate optical curvatures, varying from plane at rest to spherical curvatures up to f/2.9 over 16-mm aperture under 6.5-bar air pressure. Starting from the thin plate theory of elasticity and modeling with NASTRAN finite element analysis, one shows that 3-D optimizations—using a non-linear static flexural option—provide an accurate cycloid-like thickness distribution. VCM elasticity modeling in quenched stainless steel–chromium substrates allows the obtaining of diffraction-limited optical surfaces: Rayleigh’s criterion is achieved over a zoom range from flat to f/3.6 over 13-mm clear aperture up to 6-bar loading. These VCMs were originally developed and built at the Marseille Observatory in 1975 and implemented as a cat’s-eye mirror of IR Fourier-transform interferometers for laboratory recording of fast events in gas molecular spectroscopy. Later, for high-angular resolution astronomy with the ESO VLTI array—an interferometer made of 8 m Unit Telescopes (UTs) and 1.8 m Auxiliary Telescopes (ATs)—such VCMs were inevitable components to provide in a 3″ co-phased field-of-view since 1998. They were implemented (1) as cat’s eye mirrors of the height delay-lines beam recombination lab and (2) as ATs mirror-pair for output pupil conjugation of the movable x–y baseline. From the ESO-AMU approved convention of making 10 VCM spares up to 2024, the present modeling should provide a diffraction-limited extended field-of-view. It is pure coincidence that present results from modeling with an outer collarette are identical to results from analytic theory without collarette.
LAMOST is a powerful spectra survey telescope with 4 meter aperture and 5 degree FOV. Its focal plate with 1.75 meter diameter can accommodate 4000 fibers in which feeds 16 multi-object spectrographs. In the last conference of astronomical telescope and instrumentation hold in Munich, Germany in April, 2000, preliminary design for LAMOST multi-object spectrographs based on plane reflective gratings and Schmidt camera with refractive corrector has been reported. Here, use aspherized reflective grating instead of the plane reflective grating and need for refractive corrector plate is avoided. Compared to previous design using a refractive plate for correcting aberrations from both collimator and camera mirror, use of aspherized grating has the achromaticity advantage as well as less asphericity, and minimizes the number of optical surface. This would improve the efficiency of spectrograph and allows much broader spectral coverage. In this paper, we present the current design of multi-object spectrographs for LAMOST project.