21 June 2018 in Optics Letters
We consider using toroidal curved detectors to improve the performance of imaging optical systems. We demonstrate that some optical systems have an anamorphic field curvature. We consider an unobscured reimaging three-mirror anastigmat as an example (, , ). By assuming that the image is focused on a toroidal detector surface and performing reoptimization, it becomes possible to obtain a notable gain in the image quality—up to 40% in terms of the spot root mean square radius. Through analytic computations and finite-element analysis, we demonstrate that this toroidal shape can be obtained by bending of a thinned detector in a relatively simple setup.
30 November 2022 in Journal of Neural Engineering
Objective. Cortical activity can be recorded using a variety of tools, ranging in scale from the single neuron (microscopic) to the whole brain (macroscopic). There is usually a trade-off between scale and resolution; optical imaging techniques, with their high spatio-temporal resolution and wide field of view, are best suited to study brain activity at the mesoscale. Optical imaging of cortical areas is however in practice limited by the curvature of the brain, which causes the image quality to deteriorate significantly away from the center of the image. Approach. To address this issue and harness the full potential of optical cortical imaging techniques, we developed a new wide-field optical imaging system adapted to the macaque brain. Our system is composed of a curved detector, an aspherical lens and a ring composed of light emitting diodes providing uniform illumination at wavelengths relevant for the different optical imaging methods, including intrinsic and fluorescence imaging. Main results. The system was characterized and compared with the standard macroscope used for cortical imaging, and a three-fold increase of the area in focus was measured as well as a four-fold increase in the evenness of the optical quality in vivo. Significance. This new instrument, which is to the best of our knowledge the first use of a curved detector for cortical imaging, should facilitate the observation of wide mesoscale phenomena such as dynamic propagating waves within and between cortical maps, which are otherwise difficult to observe due to technical limitations of the currently available recording tools.
1 January 2026 in Review of Scientific Instruments
Maintaining optimal x-ray beam quality in accelerator-based light-sources requires mirrors with exceptional shape and surface precision. In practice, mirrors are often mounted in diverse orientations—such as in Kirkpatrick–Baez systems—where gravitational and mechanical effects may differ significantly from upward-facing metrology configurations. In this study, we use optical ray tracing to investigate alternative metrology geometries suitable for measuring side-facing and downward-facing mirrors. We propose a modified profilometry approach for use with the European Synchrotron Radiation Facility long trace profiler, in which beam folding optics are integrated beneath the scanning head to redirect the measurement beam. The approach combines a detailed optical model of the instrument implemented using ray-tracing, enabling accurate evaluation of the impact of motion-induced errors under realistic acquisition conditions. For downward-facing configurations, a promising solution was found experimentally, then characterized, and investigated with an analysis of the impact of alignment tolerance. While preliminary insights are provided for the side-facing setup, all proposed configurations exhibited sensitivity to motion errors of the scanning head, highlighting challenges for robust implementation.