Mohammad Zoynal Abedin

Dr. Mohammad Zoynal Abedin


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2019 in International Journal of Engineering Materials and Manufacture
Verified
Journal Article
Open access
PDF file
A N M Mominul Islam MukutA N M Mominul Islam Mukut
A N M Mominul Islam Mukut
MAMohammad Zoynal Abedin
Mohammad Zoynal Abedin
Due to higher price, limited supply and negative impacts on environment by fossil fuel, automobile industries have directed their concentrations in reducing the fuel consumption of vehicles in order to achieve the lower aerodynamic drag. As a consequence, numerous researches have been carried out throughout the world for not only getting the optimum aerodynamic design with lower drag penalty and but also other parameters that increases the fuel consumption. In this regard, relevant experimental and numerical outcomes on vehicle drag reduction considering various techniques such as active, passive and combined techniques in order to delay or suppress flow separation behind the vehicles have been considered in this review paper. Furthermore, the effects of drag reduction and their applicability on the vehicles are also illustrated in this paper. Therefore, it is conjectured that the drag reduction has been improved as much as 20%, 21.2%, and 30% by using the active, passive and combined control systems, respectively.

27 October 2022 in Heliyon
Verified
Journal Article
Open access
DRDalim Kumer Roy
Dalim Kumer Roy
MAMohammad Zoynal Abedin
Mohammad Zoynal Abedin
The aim of this paper is to provide a review of the most promising opportunities for sustainable biofuel generations in Bangladesh. Many researchers provide their opinions with their experimental results, but there has been no overall statistics and potentiality for the sustainable production of biofuel such as bioethanol and biodiesel in Bangladesh. The paper reviews the recent statistical conditions and the potential of biodiesel and bioethanol production in Bangladesh compared to other countries. Basically, the paper focuses on the potentiality of various biofuel feedstocks like as soybean oil, mustard oil, cottonseed oil, sesame oil, coconut oil, algae, rubber seed oil, jatropha, karanja oil, castor, bahera, neem, rice bran oil, pitraj and also different types of residues, crops, fruits, wastes. Among these reviewed papers, it is revealed that Bangladesh can generate annually about 0.16 million tons of edible oil. In addition, Bangladesh has the ability to produce about 1001881 tons of biodiesel from 2387500 tons of non-edible oil. Also, 0.04 million metric tons of biodiesel can be made from rubber seed oil. On the other hand, about 32 metric tons of bioethanol from 65.36 metric tons of agricultural crop residues, and about 143670082.36 gallons of bioethanol from 10.22 million metric tons of potato that is enough to meet the demand of 5% bioethanol blend annually. Furthermore, Bangladesh can produce 31.65 million metric tons of bioethanol from rice residue and 1.34 million metric tons of crude rice bran oil from rice husk of the paddy. It is conjectured that these annual production of various feedstocks can be used as major sources of biofuel and also can meet the demands of biofuel in Bangladesh.

20 October 2020 in International Journal of Engineering Materials and Manufacture
Verified
Journal Article
Open access
PDF file
SAShamim Ahmed
Shamim Ahmed
MAMohammad Zoynal Abedin
Mohammad Zoynal Abedin
The scientists revise the heat transfer enhancement techniques time to time to achieve better performance and to obtain optimized designs of heat exchangers. The present study reviews the performance and techniques of heat transfer enhancement using various insert devices such as twisted tape and wire coil insert as well as completely different forms of other inserts like air-foil shape inserts, X-shaped twisted tape inserts, baffles and V-winglets inserts with various types of medium and nanofluids. According to the summary of recent significant researches on the heat transfer enhancement by using different types of inserts and combinations of these inserts with various nanofluids showed that insert can indicatively enhance the heat transfer rate by modifying its geometry or configurations like twist ratio, length ratio, pitch ratio, segmented tape, perforated tape, angle of arrangements and insert quantities and so on which caused a considerable impact on performance characteristics of heat transfer enhancement along with the pressure drop and friction factor. It is revealed through reviewing the related literature that the highest value of equivalence heat transfer enhancement is as maximum as 400%, 300% and 9% for the twisted tape insert with helical tube, the air foil shaped inserts and for the wire coil inserts, respectively when compared with the smooth tube. In the case of baffles in nanofluids, as maximum as 255% equivalence heat transfer enhancement could be achieved when compared with that of baffles without nanofluids.

15 September 2018 in International Journal of Engineering Materials and Manufacture
Verified
Journal Article
Open access
MAMohammad Zoynal Abedin
Mohammad Zoynal Abedin
MSM. A. Rashid Sarkar
M. A. Rashid Sarkar
This paper reports an experimental analysis to investigate the enhancement of turbulent heat transfer flow of air through one smooth tube and four different tubes with wire-coil inserts (Pitches, Pc = 12, 24, 40, and 50 mm with corresponding helix angles, a =100, 200, 350, and 450, respectively) at low Reynolds numbers ranging from 6000 to 22000. The test section of the tube was electrically heated and was cooled by fully developed turbulent air flow. The performance of the tubes was evaluated by considering the condition of maximizing heat transfer rate. From the measured data, the heat transfer characteristics such as heat transfer coefficient, effectiveness and Nusselt number, and the fluid flow behaviours such as friction factor, pressure drops and pumping power along the axial distance of the test section were analyzed at those Reynolds numbers for the tubes. The results indicated that for the tubes with wire-coil inserts at low Reynolds numbers, the turbulent heat transfer coefficient might be as much as two-folds higher, the friction factors could be as much as four-folds higher, and the effectiveness might be as much as 1.25 folds higher than those for the smooth tube with similar flow conditions. A correlation was also developed to predict the turbulent heat transfer coefficients through the tubes at low Reynolds numbers.

15 April 2021 in International Journal of Engineering Materials and Manufacture
Verified
Journal Article
Open access
PDF file
JCJungko Moni Chakma
Jungko Moni Chakma
MAMohammad Zoynal Abedin
Mohammad Zoynal Abedin
Heat generation of engineering appliances has bad effect in handling the system can cause the trouble, short life cycle of machines, frequent maintenance requirements and low reliability of systems. The passive cooling technique has been widely used to solve such problems. This review work summarizes the heat transfer enhancement technique in a rectangular fin with economic way. So many research about the enhancement of heat transfer by rectangular fins experimentally and numerically and found very significant result. In this review, various types of rectangular fin structures are studied simultaneously. It is revealed through reviewing the related literature that the highest value of equivalent heat transfer enhancement is found the increase in average heat transfer performance of inverted triangular notched fin 50.51% as compared with plane rectangular fin and the perforated fin total heat transfer rate increased by 38.9% compared to regular fin. Furthermore, by reduction of the optimal fin spacing, heat flux can be changed by 20% in standard rectangular fin when compared with regular fin spacing. Also cooling performance of the inclined rectangular fin with 60° of tilt angle is seen to be as 6% higher than solid rectangular fin. This article can be considered as a benchmark in the practical application for enhances the heat transfer rates.

17 July 2023 in American Journal of Mechanical and Industrial Engineering
Verified
Journal Article
Open access
PDF file
SISamsul Islam
Samsul Islam
MAMohammad Zoynal Abedin
Mohammad Zoynal Abedin
ZAZahid Ahsan
Zahid Ahsan
AMAbdul Hannan Miah
Abdul Hannan Miah
AIArif Md. Shahed Iqubal
Arif Md. Shahed Iqubal
SKSaik Mostar Kiron
Saik Mostar Kiron
The automobile industry is one of the growing industries in Bangladesh. Compared to the last decennary, the growth of the automobile industry has gradually increased due to the economic development and purchasing capacity of the middle and upper-middle classes people of the country. As reported by the Bangladesh Road Transport Authority, the unit of passenger cars increased at a 5.43 percent yearly average swelling rate from 2011-2020. In Bangladesh, enormous car plants assemble the Mitsubishi Pajero Sport, Hino bus, Tata bus and motorcycles etc. Some renowned automobile assembling and manufacturing companies are TATA Motors Bangladesh (Joint Venture with Nitol-Niloy Motors Ltd.), TVS Auto Bangladesh Limited, Runner Automobiles, Akij Motors, Bangladesh Honda Private Limited, Walton Hi-Tech Industries Limited, Nitol Motors Ltd., Uttara Motors Ltd., Pragoti Industries Ltd., Aftab Automobiles, Ifad Autos Ltd., Singer Bangladesh Limited, Rangs Motor's Ltd., Atlas Bangladesh Ltd., Rahimafrooz Globatt Limited, Bangladesh Machine Tools Factory, HS Enterprise, S. R Motors Ltd., Chisti Engineering and Mechanical Works, Jonata Automobile Parts. In this paper, there are lots of schematic diagrams, detailed figures and pictures given for a better understanding of the basic topics, which is the fulfillment of this paper’s aim. This study will discuss basic questionnaires with answers for technicians and service engineers in the automobile sector. This compiled work will definitely help to face the interview and written exam in automobile-related fields. At the same time, it will help to enrich the knowledge of technicians and service engineers in their work field.