A N M Mominul Islam Mukut

Dr. A N M Mominul Islam Mukut

orcid

Research Focus & Metrics

Academic Career Length

57Years (1970-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2019 in International Journal of Engineering Materials and Manufacture
Verified
Journal Article
Open access
PDF file
A N M Mominul Islam MukutA N M Mominul Islam Mukut
A N M Mominul Islam Mukut
MAMohammad Zoynal Abedin
Mohammad Zoynal Abedin
Due to higher price, limited supply and negative impacts on environment by fossil fuel, automobile industries have directed their concentrations in reducing the fuel consumption of vehicles in order to achieve the lower aerodynamic drag. As a consequence, numerous researches have been carried out throughout the world for not only getting the optimum aerodynamic design with lower drag penalty and but also other parameters that increases the fuel consumption. In this regard, relevant experimental and numerical outcomes on vehicle drag reduction considering various techniques such as active, passive and combined techniques in order to delay or suppress flow separation behind the vehicles have been considered in this review paper. Furthermore, the effects of drag reduction and their applicability on the vehicles are also illustrated in this paper. Therefore, it is conjectured that the drag reduction has been improved as much as 20%, 21.2%, and 30% by using the active, passive and combined control systems, respectively.

15 September 2022 in Case Studies in Thermal Engineering
Verified
Journal Article
Open access
MNMd. Nurun Nabi
Md. Nurun Nabi
WHWisam K. Hussam
Wisam K. Hussam
HAHasan Mohammad Mostofa Afroz
Hasan Mohammad Mostofa Afroz
Adib Bin RashidAdib Bin Rashid
Adib Bin Rashid
JIJahidul Islam
Jahidul Islam
A N M Mominul Islam MukutA N M Mominul Islam Mukut
A N M Mominul Islam Mukut

1 January 2014 in Procedia Engineering
Verified
Journal Article
Open access
A N M Mominul Islam MukutA N M Mominul Islam Mukut
A N M Mominul Islam Mukut
HMHiroshi Mizunuma
Hiroshi Mizunuma
OHObara Hiromichi
Obara Hiromichi
This paper represents a series of experiment to figure out plasma vortex generator as a means of separation flow control. Typical conventional vortex generator is a vane normal to wall and has a yaw angle against a main flow. This yaw angle gives a penalty of drag increase at the sacrifice of the separation suppression. A plasma vortex generator developed here has a yaw angle of 0° and thus the penalty could be minimized. An exposed electrode was installed on the Kapton vane tip, and another electrode was embedded in the vane. Stream-wise counter-rotating vortices are produced by the vane type plasma vortex generator at downstream that helps to control flow separation. The effect of the plasma vortex generator has been investigated on a turbulent boundary layer on a 20°-inclined slope. The separation flow was visualized by using a smoke wire, and the velocity profiles were measured using a hot-wire anemometer. The plasma vortex generators suppressed the separation similarly as the conventional vortex generator, and its performance was validated

 in Journal of Mechanical Engineering
Verified
Journal Article
Open access
PDF file
A N M Mominul Islam MukutA N M Mominul Islam Mukut
A N M Mominul Islam Mukut
QIQuamrul Islam
Quamrul Islam
MAMuhammad Mahbubul Alam
Muhammad Mahbubul Alam
The present demand of energy is increasing day by day due to various reasons such as increasing population, the aspiration for improved living standards and general economic and industrial growth. In the wake of the increasing world energy crisis, which mostly affected the least developed countries, the interest in alternative energy resources has been increased considerably. In this regard, wind as a source of energy can hold good prospect for a underdeveloped country like Bangladesh. Besides, utilization of wind energy has been growing rapidly in the whole world due to environmental pollution, consumption of the limited fossil fuels and global warming. Bangladesh has fairly wind energy potential, exploitation of the wind energy is still in the crawling level. In the current study, wind characteristics and wind energy potential of Teknaf, Kutubdia, Sandwip, Kuakata, and Mongla in the Coastal Areas are investigated. The measured wind data were processed as hourly and monthly basis. Weibull probability density functions of the locations are calculated in the light of observed data and Weibull shape parameter and scale parameter are also calculated. The main objective is to find out wind energy potential for the utilization. Keywords: Wind energy, Weibull distribution, Wind power, Coastal area. doi:10.3329/jme.v39i1.1833 Journal of Mechanical Engineering, vol. ME39, No. 1, June 2008 45-49

26 December 2023 in International Journal of Automotive and Mechanical Engineering
Verified
Journal Article
Open access
PDF file
ZEZulkarna- En
Zulkarna- En
AIAshraful Islam
Ashraful Islam
AAAbdullah Al-Faruk
Abdullah Al-Faruk
RPRhyhanul Islam Pranto
Rhyhanul Islam Pranto
A N M Mominul Islam MukutA N M Mominul Islam Mukut
A N M Mominul Islam Mukut
This present study describes the aerodynamic characteristics of supersonic flow over biconvex and double wedge airfoils using a finite volume method-based commercial CFD code Ansys Fluent. A steady-state RANS approach is used with SST k-ω viscous modeling. A series of simulations are conducted to analyze the characteristics of shock and expansion waves formed around the airfoils for Mach numbers ranging from 1.4 to 3.4 with varying angles of attack (α) from 0° to 20°. It is observed that the lift and drag coefficients both increase with the angle of attack for a fixed Mach number and decrease with the Mach number for a fixed angle of attack. Double wedge airfoil generates about 5% more lift at a low Mach number and 1% more lift at a higher Mach number compared to the biconvex airfoil. However, the biconvex airfoil generates lesser drag than the double wedge airfoil. The maximum value of the pressure coefficient (Cp ) is found to be 1.7 for biconvex airfoil and 1.4 for double wedge airfoil. The maximum value of the lift-to-drag ratio for biconvex airfoil is 7.63, occurs at 1.4 Mach number and 3.46° angle of attack, whereas the value for double wedge airfoil is 5.19 at the same Mach number with 4.47° angle of attack, which suggest that biconvex airfoil has a higher lift-to-drag ratio and gives a better aerodynamics performance. The shock waves start to detach after an angle of attack of 5° and the shock wave is fully detached at a 15° angle of attack for biconvex airfoil for Mach number of 1.4. For the same Mach number, the double wedge airfoil, the shock wave starts to form the same as the biconvex airfoil but the waves are fully detached at a lower angle of attack of 10°. With the increasing Mach number, the shock waves remain attached to the airfoil.

1 January 2013 in Journal of Fluid Science and Technology
Verified
Journal Article
Closed access
A N M Mominul Islam MukutA N M Mominul Islam Mukut
A N M Mominul Islam Mukut
HMHiroshi Mizunuma
Hiroshi Mizunuma
HOHiromichi Obara
Hiromichi Obara
TSTakehiko Segawa
Takehiko Segawa