Environmental data acquisition tools are broadly used for climate monitoring and urban comfort assessment followed by data mining and sensing techniques for putting into evidence the relationship between environmental qualities of urban spaces and human well-being. Within this context, an environmental toolkit is a fundamental tool to evaluate transient outdoor comfort. This study explains the prototyping and validation of a mobile environmental sensor kit. The results show the prototype has reasonable accuracy despite its affordability with respect to industrial sensors.

Combining the additive manufacturing (AM) process of extrusion with lightweight concrete, mono-material but multi-functional elements with an internal cellular structure can be created to achieve good thermal performance of a wall at low resource consumption. The aim of this paper is to analyze and optimize the actual thermal performance of such a component. A sensitivity analysis and a parametric optimization were conducted based on a mathematical description of heat transfer in cellular structures. To investigate the thermal performance, 2D and 3D heat transfer simulations were used and validated by heat flux measurements on an existing prototype. A geometric optimization led to a further reduction of the U-value by up to 24%, reaching 0.58 W/m² K. The ratio of solid material to air inside the cells (relative density) was identified as the main driver, in addition to cell diameter, cell height, and cell wall thickness. The comparison of analytical and numerical results showed high correspondence with deviations of 3–10%, and for the experimental results 25%. These remaining deviations can be traced back to simplifications of the theoretical models and discrepancies between as designed and as built. The presented approach provides a good basis for optimizing the thermal design of complex AM components by investigating practical thermal problems with the help of 2D and 3D simulations, and thus offers a great potential for further applications.

The construction industry is facing a dual challenge: an increasing demand for new buildings on the one hand and the urgent need to drastically reduce emissions and waste on the other. One promising field of research to face these challenges comprises additive manufacturing (AM) technologies. Through these advanced methods, digital workflows between design and fabrication can be implemented to optimise the form and structure, unlocking new architectural freedom while ensuring sustainability and efficiency. However, to drive this transformation in construction, the new technologies must be investigated in large-scale applications. One of these fast-emerging AM techniques is Shotcrete 3D Printing (SC3DP). The present research documents the 1:1 scale manufacturing process, from digital to real, of a building section utilising SC3DP. A workflow and production steps, spanning from design over manufacturing to assembly, are introduced. The architectural design, reinforced by computational methods, was iteratively refined to adapt to manufacturing constraints. The paper also emphasises the importance of a digital twin in ensuring seamless data integration and real-time adjustments during construction. By incorporating reinforcement techniques such as short rebar insertion and robotic fibre winding, this study demonstrates the structural capabilities achievable with SC3DP. In summary, the implementation of comprehensive digital workflows utilising computational design, automated data acquisition and data flow, as well as robotic fabrication is presented to demonstrate the potential of AM methods in construction. Furthermore, this paper provides a perspective on potential future research paths and opportunities inherent in leveraging the innovative SC3DP technique.