Self-timed rings are now considered as a promising solution for generating high-resolution timing signals. One of the main constraints for designing oscillators based on self-timed rings is to avoid burst oscillating modes and to produce uniformly spaced events in order to act as a periodic timebase. This paper presents a time-accurate model for self-timed rings based on a high-level behavioural model enriched by stage timing information. This provides a framework to understand and analyse the temporal behaviour and the performances of oscillating asynchronous rings, especially the robustness to process variability. Moreover, it offers designers the ability to easily prevent burst oscillating modes by applying simple ring sizing rules. Electrical simulations demonstrate the correctness and efficiency of the approach.
1 January 2008 in Journal of Electrical and Computer Engineering
The short‐time Fourier transform (STFT) is a classical tool, used for characterizing the time varying signals. The limitation of the STFT is its fixed time‐frequency resolution. Thus, an enhanced version of the STFT, which is based on the cross‐level sampling, is devised. It can adapt the sampling frequency and the window function length by following the input signal local characteristics. Therefore, it provides an adaptive resolution time‐frequency representation of the input signal. The computational complexity of the proposed STFT is deduced and compared to the classical one. The results show a significant gain of the computational efficiency and hence of the processing power.
1 February 2018 in AEU - International Journal of Electronics and Communications
On-chip digital oscillators are ubiquitous in every communication applications like in RF architectures or intra-chip communication systems. Actually, their integration to the standard CMOS design flow, their ability to generate high-frequency signals, as well as their configurability make them really attractive for designers. However, these kinds of digital oscillators suffer from their sensitivity to any process, voltage, or temperature variations. Self-timed systems are usually considered robust to these kinds of variations. This paper proposes the use of self-timed ring structures for generating high-resolution timing signals. One of the main difficulties when designing such oscillators is to avoid burst oscillating modes and produce uniformly spaced events in order to act as a periodic time-base. Based on a high-level ring model, enriched with stage switching timing information, the temporal behavior of oscillating self-timed rings is studied and their robustness to process variability is evaluated. Several ring architectures are explored to take advantage of complex combination of stages I/Os and it is shown that one can tune a tradeoff between oscillation period and signal stability. In addition, the paper provides designers with the ability to easily prevent burst oscillating modes by applying a very tractable ring design rule. Electrical simulations demonstrate the correctness and efficiency of the approach.
25 June 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
In this study, a harmonic-rejection N-path mixer is designed, implemented, calibrated, and measured. The proposed mixer features a wide bandwidth suitable for low-power multi-standard RF front-end receivers while keeping low complexity by opting for only 5 paths rather than 10 and only one stage to perform harmonic rejection up to the $7^{th}$ local oscillator (LO) harmonic. This work employs a calibration strategy to prevent mismatches due to the fabrication process from affecting the system performance. The 0.17-1.2-GHz RF front-end mixer is fabricated in a 28-nm FDSOI technology. Measurements show a harmonic rejection higher than 45 dB for the $3^{rd}$ , $5^{th}$ , and $7^{th}$ LO harmonics, 13 dB gain, 13.3 dB NF, $-$ 3.5 dBm in-band IIP3. The total power consumption is only 22 mW for a surface area of 0.62 $\times$ 0.22 $mm^{2}$ .
This paper proposes an N-Path mixer rejecting a wide bandwidth 1:8, i.e. including the 7 th harmonic, while keeping a low complexity, particularly suitable for low power multistandard receivers. The main principle is based on an accurate choice of the switch control signals and of the gains of the amplifiers stage. The circuit has been manufactured in 28nm FDSOI technology. Measurements prove the theory with an harmonic rejection higher than 45 dB for the 3 rd , 5 th , and 7 th harmonics, an in-band IIP3 of -3.5 dBm, for a power consumption of 22 mW.