Partially hydrolyzed Polyacrylamide (PHPAM) crosslinked by Cr+3 is frequently applied to plug thief zone for the better water management in matured oil reservoir. However, PHPAM gel may certainly cause inevitable formation damage nearby the wellbore. Although various kinds of chemical agents, such as hydrogen peroxide (H2O2), sodium hypochlorite (NaOCl), and chlorine dioxide (ClO2) were employed to mitigate the nearby wellbore damage. But, huge financial investment, poor degelation efficiency, environmentally insecure, corrosion problem, and long time span requirement persuade researchers to look for other effective technique. In this connection, ultrasonic waves is characterized by reliable, environment friendly, and cost effective technology. Current work involves comparative study of PHPAM gel degradation by the individual means of chemical agent and ultrasonic waves. Subsequently, the best-performed ultrasonic parameters and well-performed chemical agent were used independently and then simultaneously to deplug (PHPAM gel) the core sample. Results showed that 20 KHz frequency (1000 W) effectively reduced gel viscosity from original (2495 mPa.s) to 1.37 mPa.s after 10 min irradiation. This degradation is attributed to cavitation, heat energy, and hydroxyl radical (HO∙). However, after 2 min further exposure, the viscosity grew back to 3.29 mPa.s (18 KHz), 1.42 mPa.s (20 KHz), and 3.74 mPa.s (25 KHz). This adverse behavior is owing to hydroxyl radical (HO∙) annihilation. In chemical treatment, H2O2 among other chemicals efficiently degelled the PHPAM gel's original viscosity to 2.64 mPa.s after 24 h reaction. Similarly, NaOCl and ClO2 brought down original viscosity to 6.5 mPa.s and 159 mPa.s respectively. SEM of the samples before and after treatment was performed for the better understanding of PHPAM gel morphology. Considering dynamic experiment, maximum 23.5% and 19.80% damaged permeability recovery (30 × 10-3 μm2 gas permeability) were obtained by applying ultrasonic waves (20 KHz, 1000 W, and 100 min irradiation) and chemical agent (H2O2) respectively. Permeability recovery was further increased to 40.90% by the simultaneous application of ultrasonic waves and chemical agent.

Due to the strong heterogeneity between the fracture and the matrix in fractured oil reservoirs, injected water is mainly moved forward along the fracture, which results in poor water flooding. Therefore, it is necessary to reduce the water cut and increase oil production by using the conformance control technology. So far, gel particles and partially hydrolyzed polyacrylamide (HPAM)/Cr³⁺ gel are the most common applications due to their better suitability and low price. However, either of the two alone can only reduce the conductivity of the fracture to a certain extent, which leads to a poor effect. Therefore, to efficiently plug the fracture to enhance oil recovery, a combination of gel particles and the HPAM/Cr³⁺ system is used by laboratory tests according to their respective advantages. The first step is that the gel particles can compactly and uniformly cover the entire fracture and then the fracture channel is transformed into the gel particles media. This process can enhance the oil recovery to 18.5%. The second step is that a suitable HPAM/Cr³⁺ system based on the permeability of the gel particles media is injected in the fractured core. Thus, the fracture can be completely plugged and the oil in the matrix of the fractured core can be displaced by water flooding. This process can enhance oil recovery to 10.5%. During the whole process, the oil recovery is increased to 29% by this method. The results show that this principle can provide a new method for the sustainable and efficient development of fractured oil reservoirs.

It is imperative to recover the well productivity lose due to formation damage nearby wellbore during variant well operations. Some indispensable issues in conventional techniques make ultrasonic technology more attractive due to simple, reliable, favorable, cost-effective, and environment friendly nature. This study proposes the independent and combined use of ultrasonic waves and chemical agents for the treatment of already damaged core samples caused by exposure to distilled water. Results elucidate that ultrasonic waves with optimum (20kHz, 1000W) instead of maximum frequency and power worked well in the recovery owing to peristaltic transport caused by matching of natural frequency with acoustic waves frequency. In addition, hundred minutes was investigated as optimum irradiation time which provided ample time span to detach fine loosely suspended particles. However, further irradiation adversely affected the damaged permeability recovery. Moreover, permeability improvement attributes to cavitation due to ultrasonic waves propagation through fluid contained in porous medium and thermal energy generated by three different ways. Eventually, experimental outcomes indicated that maximum (25.3%) damaged permeability recovery was witnessed by applying ultrasonic waves with transducer #2 (20kHz and 1000W) and optimum irradiation timeframe (100min). This recovery was further increased to 45.8% by applying chemical agent and optimum ultrasonic waves simultaneously.