In this study, the mechanism of physical–chemical viscosity reduction of different heavy oils under ultrasonic wave is explored. Experiments of viscosity reduction and viscosity recovery of different heavy oils under ultrasonic excitation were carried out, and the optimal ultrasonic parameters, ultrasonic physical disturbance, and cavitation viscosity reduction extent of different oil samples were determined. Based on the element analysis methods, four-component analysis, gas chromatography analysis, and formation water pH value test, the micro-mechanism of the oil chemical structure change and water samples under ultrasonic wave was analyzed. The results show that the water content, temperature, and initial viscosity of heavy oil are the key to reduce the viscosity of heavy oil. The higher viscosity of the initial oil sample, the higher water content, and the temperature were needed. Compared with the lower viscosity oil sample, the higher viscosity oil sample has higher extent of cavitation viscosity reduction and lower extent of physical disturbance viscosity reduction under ultrasonic wave. After ultrasonic treatment, the contents of heteroatoms, resins, and asphaltenes in heavy oil samples with high viscosity decreased significantly, and the conversion extent of high carbon chain to low carbon chain was greater. In addition, the pH of water in heavy oils decreased after ultrasonic treatment, and the pH of water in high viscosity heavy oil decreased more significantly after ultrasonic treatment.

• Unsupervised learning groups rocks based on permeability, porosity & wettability. • Ultrasonic wave improves water flooding performance in low-permeability cores. • Ultrasonic wave can change the micromorphology of low-permeability cores. • Ultrasonic wave can reduce the oil viscosity and oil-water interfacial tension.

Due to the strong heterogeneity between the fracture and the matrix in fractured oil reservoirs, injected water is mainly moved forward along the fracture, which results in poor water flooding. Therefore, it is necessary to reduce the water cut and increase oil production by using the conformance control technology. So far, gel particles and partially hydrolyzed polyacrylamide (HPAM)/Cr³⁺ gel are the most common applications due to their better suitability and low price. However, either of the two alone can only reduce the conductivity of the fracture to a certain extent, which leads to a poor effect. Therefore, to efficiently plug the fracture to enhance oil recovery, a combination of gel particles and the HPAM/Cr³⁺ system is used by laboratory tests according to their respective advantages. The first step is that the gel particles can compactly and uniformly cover the entire fracture and then the fracture channel is transformed into the gel particles media. This process can enhance the oil recovery to 18.5%. The second step is that a suitable HPAM/Cr³⁺ system based on the permeability of the gel particles media is injected in the fractured core. Thus, the fracture can be completely plugged and the oil in the matrix of the fractured core can be displaced by water flooding. This process can enhance oil recovery to 10.5%. During the whole process, the oil recovery is increased to 29% by this method. The results show that this principle can provide a new method for the sustainable and efficient development of fractured oil reservoirs.

It is imperative to recover the well productivity lose due to formation damage nearby wellbore during variant well operations. Some indispensable issues in conventional techniques make ultrasonic technology more attractive due to simple, reliable, favorable, cost-effective, and environment friendly nature. This study proposes the independent and combined use of ultrasonic waves and chemical agents for the treatment of already damaged core samples caused by exposure to distilled water. Results elucidate that ultrasonic waves with optimum (20kHz, 1000W) instead of maximum frequency and power worked well in the recovery owing to peristaltic transport caused by matching of natural frequency with acoustic waves frequency. In addition, hundred minutes was investigated as optimum irradiation time which provided ample time span to detach fine loosely suspended particles. However, further irradiation adversely affected the damaged permeability recovery. Moreover, permeability improvement attributes to cavitation due to ultrasonic waves propagation through fluid contained in porous medium and thermal energy generated by three different ways. Eventually, experimental outcomes indicated that maximum (25.3%) damaged permeability recovery was witnessed by applying ultrasonic waves with transducer #2 (20kHz and 1000W) and optimum irradiation timeframe (100min). This recovery was further increased to 45.8% by applying chemical agent and optimum ultrasonic waves simultaneously.