Maciej Panek

Dr. Maciej Panek

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 August 2020 in Journal of Nondestructive Evaluation
Verified
Journal Article
Open access
PDF file
MPMaciej Panek
Maciej Panek
SBStanislaw Blazewicz
Stanislaw Blazewicz
KKKrzysztof J. Konsztowicz
Krzysztof J. Konsztowicz
Damage processes in glass fiber reinforced plastic composites have been examined extensively by many analytical and experimental methods, including acoustic emission. While damage phenomena in mezo- and macro-scale are well described, the subtle mechanisms in micro-scale are still under discussion. The goal of this work was to apply the acoustic emission to examine damage initiation in fiber reinforced epoxy resin composites with different continuous glass-fiber architectures. Basic lay-ups were used: unidirectional, cross-ply and angle-ply, each with varying fiber volume content in epoxy matrix. Detection of fine micro-cracks was possible owing to merging the mechanical monotonic and step-load tests in 4-point bending with acoustic emission monitoring and detailed scanning electron microscopy observations. Clear images of macroscopically undamaged samples after interruption of step-loading cycles revealed the initiation of micro-cracks by debonding of fiber-matrix interfaces, in agreement with acoustic emission signal analyses, featuring use of historic index and rise time/amplitude ratio.

29 July 2025 in Polymers
Verified
Journal Article
Open access
PDF file
AKAleksander Andrzej Kmiecik
Aleksander Andrzej Kmiecik
MPMaciej Panek
Maciej Panek
The aim of this paper is the investigation of changes in modal parameters of composite pressure vessel structures with different prestress states realized by varying fiber tension. Two series of vessels was manufactured and examined with different wound tensions, the first—3 N and second—80 N, respectively. Other technological factors, such as the type and weight of carbon fiber used, as well as liner type, were kept constant. The vessels were examined with internal pressure equal to atmospheric and without pressure fittings. The modal tests were performed on storage tanks suspended on an elastic cord in the horizontal orientation to prevent the structure from being disturbed by vibrations. The examinations were focused only on the cylindrical part of the vessels. Based on modal analysis, parameters such as natural frequencies, dampings and modal shapes were determined. Research results indicate clear changes in natural frequencies and damping coefficients between the two investigated prestress states. It is interesting that natural frequencies for bending modes are higher in the case of structures with high fiber tension, while in the case of other vibration forms, the natural frequencies have smaller values in comparison with the first series.

19 November 2025 in Polymers
Verified
Journal Article
Open access
PDF file
MBMiroslaw Bocian
Miroslaw Bocian
MKMikołaj Kazimierczak
Mikołaj Kazimierczak
BKBarbara Kmiecik
Barbara Kmiecik
.K. Kryspin
. Kryspin
MPMaciej Panek
Maciej Panek
A vibration-based protocol is presented for identifying barely visible impact damage (BVID) in type-IV composite-overwrapped pressure vessels (COPVs). A 1 kJ hemispherical-tip strike was applied to a fully pressurized vessel, which was subsequently depressurized and characterized by free–free experimental modal analysis over a 168-point grid. The frequency response functions (FRFs) at the impact meridian exhibited distinct peaks near 3.70, 4.34, and 4.90 kHz with larger amplitudes and lower coherence than at the diametrically opposite meridian, indicating local circumferential stiffness loss. A detailed finite element model of the liner, bosses, and carbon/epoxy overwrap was updated by idealizing a cylindrical sub-volume with a 90% reduction in orthotropic stiffness. The pristine and “damaged” numerical modal sets agreed closely (mean frequency error < 2%), and for most of the first 60 modes, the diagonal Modal Assurance Criterion (MAC) remained ≥ 0.90. However, in several nearly degenerate circumferential mode pairs, the diagonal MAC dropped to 0.49–0.88 because the local asymmetry rotated the eigenvectors within a common subspace, showing that classical MAC alone cannot expose such early-stage defects. Radial displacement scan-lines provided the missing spatial resolution. Modes whose antinodal regions intersect the dent showed pronounced local amplitude bulges and slight angular shifts in the peak toward the impact site, whereas modes with a nodal line across the damage were virtually unchanged. The combined use of FRF asymmetry, MAC screening, and scan-line deformation profiling localized the impact to the correct circumferential sector with centimeter-scale resolution along the scan ring, yielding predictive signatures for rapid, non-pressurized in situ assessment of impacted COPVs after depressurization.

26 April 2024 in Inżynieria i Budownictwo
Verified
Journal Article
Closed access
MKMaksymilian Kliński
Maksymilian Kliński
MPMaciej Panek
Maciej Panek
The acoustic emission method is applied for damage monitoring through the analysis of internal events within the material. Sensors were placed at the cantilever joint during the proof loading. Signal analysis revealed potential damages. Signal values were compared against criteria for assessing the condition of reinforced concrete structures. Regular measurements detect potential damages, and combining this technique with other methods enhances its efficiency

3 January 2020 in Springer Proceedings in Materials
Verified
Book Chapter
Closed access
PDF file
MBMirosław Bocian
Mirosław Bocian
MPMaciej Panek
Maciej Panek
DPDariusz Pyka
Dariusz Pyka
NANoemie Alexandre
Noemie Alexandre