Mikołaj Kazimierczak

Mr. Mikołaj Kazimierczak

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 November 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Dariusz PykaDariusz Pyka
Dariusz Pyka
Jakub Jan SłowińskiJakub Jan Słowiński
Jakub Jan Słowiński
AKAdam Kurzawa
Adam Kurzawa
MRMaciej Robert Roszak
Maciej Robert Roszak
MSMateusz Stachowicz
Mateusz Stachowicz
DGDominika Grygier
Dominika Grygier
This study investigates the mechanical properties and biocompatibility of eight commercially available filaments tailored for Fused Deposition Modeling (FDM) additive manufacturing. Test specimens were fabricated using original PRUSA MK4 printers, with ten samples from each selected polymer. Mechanical evaluations through static tensile and three-point bending tests revealed that PETG Carbon and PA+15CF exhibited superior tensile and flexural strengths, making them highly suitable for applications requiring high mechanical resilience. Biocompatibility assessments in line with the ISO 10993-5:2009 and ISO 10993-12:2021 standards indicated that all materials except FiberFlex 40D Fiberlogy were non-cytotoxic, supporting their potential in biomedical applications. The experimental data established material constants within the Johnson–Cook strength model, which effectively predicted the mechanical behaviors of monotonic materials like FiberFlex 40D, PETG, HIPS, TPU, and PA+15CF Rosa 3D, with maximum fitting errors not exceeding 2.6%. However, the model was inadequate for non-monotonic materials like PLA and PETG, resulting in higher errors and less accurate simulations. Scanning electron microscope (SEM) analyses provided insights into fracture mechanisms, correlating fracture surface characteristics with mechanical performance. This comprehensive study advances the understanding of mechanical properties in thermoplastic materials for 3D printing, validates numerical models for certain materials, and confirms material suitability for biomedical use.

6 June 2024 in Polymers
Verified
Journal Article
Open access
PDF file
DGDominika Grygier
Dominika Grygier
AKAdam Kurzawa
Adam Kurzawa
MSMateusz Stachowicz
Mateusz Stachowicz
KKKarina Krawiec
Karina Krawiec
MSMaksymilian Stępczak
Maksymilian Stępczak
Dariusz PykaDariusz Pyka
Dariusz Pyka
In this study, the authors performed a strength analysis of seven groups of commercially available materials based on SLS incremental technology. Test samples were made with Original PRUSA SL1S printers, with 10 samples of each type from 7 resins selected for testing. The tests were carried out on an MTS Bionix machine in a static tensile test, during which the basic mechanical properties were determined. This is also a preliminary study to determine material constants in the Johnson-Cook strength model. The authors then performed numerical simulations to mirror the experimental tests in order to tune the rheological model. In addition, a fracture criterion was determined based on a hybrid FEM/SPH numerical method. This allowed for the expansion of material libraries currently used in numerical simulations, as well as the sensitivity of the materials’ models. In subsequent studies, in order to determine the nature of material destruction, analysis of fracture surfaces was performed using a scanning electron microscope (SEM). The final study was a biocompatibility test to assess the biological properties of the material. The conducted research made it possible to determine the strength properties of resins currently used in 3D printers, expand the libraries of material models in the computational environment (with an error rate of less than 5%), as well as observe the nature of the cracks formed and biocompatibility in the context of predicting the use of these materials for biomedical applications.

10 April 2025 in Polymers
Verified
Journal Article
Open access
PDF file
Jakub Jan SłowińskiJakub Jan Słowiński
Jakub Jan Słowiński
MRMaciej Robert Roszak
Maciej Robert Roszak
MKMikołaj Kazimierczak
Mikołaj Kazimierczak
GSGrzegorz Skrzypczak
Grzegorz Skrzypczak
MSMaksymilian Stępczak
Maksymilian Stępczak
Fused deposition modelling (FDM) technology provides a flexible and cost-effective solution for the manufacture of polymer components, enabling the precise design of structures and the incorporation of a variety of composite materials. Its development is confirmed by numerous studies on fibre reinforcements (e.g., GFRP and CF) and thermosetting resin modifications, resulting in improved impact strength and fracture toughness and increased thermal stability of products. The final mechanical properties are significantly influenced by processing parameters (e.g., fill density, layer height, and printing speed) and internal geometry (e.g., lattice structures), which can be further optimised by numerical analyses using constitutive models such as the Johnson–Cook model. The focus of the study presented here is on the fabrication of composites from FDM dies filled with F8 polyurethane resin. Filaments, including PETG carbon and PETG, were tested for potential applications with the resin. A static compression test, supported by numerical analysis using the Johnson–Cook model, was carried out to identify key mechanical characteristics and to predict the material’s behaviour under different loading conditions. The results indicate that these structures exhibit numerous potential delamination planes and voids between filament paths, leading to relatively low maximum stress values (σm ≈ 2.5–3 MPa). However, the impregnation with polyurethane resin significantly enhances these properties by bonding the layers and filling the pores, resulting in a more homogeneous and stronger composite. Additionally, numerical simulations effectively captured key aspects of structural behaviour, identifying critical stress concentration areas, particularly along the side walls and in regions forming triangular stress zones. These findings provide valuable insights into the potential of resin-filled FDM structures in engineering applications, demonstrating their improved performance over purely printed samples.

19 November 2025 in Polymers
Verified
Journal Article
Open access
PDF file
MBMiroslaw Bocian
Miroslaw Bocian
MKMikołaj Kazimierczak
Mikołaj Kazimierczak
BKBarbara Kmiecik
Barbara Kmiecik
.K. Kryspin
. Kryspin
MPMaciej Panek
Maciej Panek
A vibration-based protocol is presented for identifying barely visible impact damage (BVID) in type-IV composite-overwrapped pressure vessels (COPVs). A 1 kJ hemispherical-tip strike was applied to a fully pressurized vessel, which was subsequently depressurized and characterized by free–free experimental modal analysis over a 168-point grid. The frequency response functions (FRFs) at the impact meridian exhibited distinct peaks near 3.70, 4.34, and 4.90 kHz with larger amplitudes and lower coherence than at the diametrically opposite meridian, indicating local circumferential stiffness loss. A detailed finite element model of the liner, bosses, and carbon/epoxy overwrap was updated by idealizing a cylindrical sub-volume with a 90% reduction in orthotropic stiffness. The pristine and “damaged” numerical modal sets agreed closely (mean frequency error < 2%), and for most of the first 60 modes, the diagonal Modal Assurance Criterion (MAC) remained ≥ 0.90. However, in several nearly degenerate circumferential mode pairs, the diagonal MAC dropped to 0.49–0.88 because the local asymmetry rotated the eigenvectors within a common subspace, showing that classical MAC alone cannot expose such early-stage defects. Radial displacement scan-lines provided the missing spatial resolution. Modes whose antinodal regions intersect the dent showed pronounced local amplitude bulges and slight angular shifts in the peak toward the impact site, whereas modes with a nodal line across the damage were virtually unchanged. The combined use of FRF asymmetry, MAC screening, and scan-line deformation profiling localized the impact to the correct circumferential sector with centimeter-scale resolution along the scan ring, yielding predictive signatures for rapid, non-pressurized in situ assessment of impacted COPVs after depressurization.

23 September 2025 in Polymers
Verified
Journal Article
Open access
PDF file
MSMaksymilian Stępczak
Maksymilian Stępczak
MKMikołaj Kazimierczak
Mikołaj Kazimierczak
MRMaciej Robert Roszak
Maciej Robert Roszak
AKAdam Kurzawa
Adam Kurzawa
Krzysztof JamroziakKrzysztof Jamroziak
Krzysztof Jamroziak
In the context of growing challenges related to the safety and durability of civil infrastructure, the demand for concrete composites capable of withstanding dynamic and impact loading is steadily increasing. Conventional concrete, owing to its brittle nature and limited energy absorption capacity, does not always meet the performance requirements imposed on protective structures. The construction sector’s substantial contribution to CO2 emissions further underscores the need for environmentally responsible solutions. This study therefore explores the effects of partially replacing natural aggregate with waste-derived constituents such as SBR rubber granulate, copper slag, polypropylene and glass granulate on the mechanical properties and impact resistance of concrete. Scanning electron microscopy (SEM) and stereoscopic microscopy were used to characterize the additives’ geometry and interfacial bond quality, providing deeper insight into cement paste–aggregate interactions. Compressive testing confirmed that introducing the recycled components does not preclude meeting essential strength criteria, whereas impact experiments revealed pronounced differences in failure mode, crack propagation, and the specimen’s ability to dissipate kinetic energy. The experimental program was complemented by a life cycle assessment (LCA) that quantitatively estimated the CO2 emissions associated with producing each mixture. The findings demonstrate that judiciously selected waste materials can reduce the consumption of virgin resources, enhance concrete functionality, and improve their protective performance, thereby advancing the principles of a circular economy.