This paper demonstrates a low cost navigation solution that can efficiently work, in real-time, in denied GPS environment. It explores a reduced inertial sensor system (RISS) involving single-axis gyroscope and two-axis accelerometers together with a speed sensor to provide full navigation solution in denied GPS environments. With the assumption that the vehicle mostly stay in the horizontal plane, the vehicle speed obtained from the speed sensor are used together with the heading information obtained from the gyroscope to determine the velocities along the East and North directions. Consequently, the vehiclespsila longitude and latitude are determined. The position and velocity errors are estimated by Kalman filter (KF) relying on RISS dynamic error model and GPS position and velocity updates. The two accelerometers pointing towards the forward and transverse directions are used together with a reliable gravity model to determine the pitch and roll angles. This paper analyzes and discusses the merits and limitations of the proposed RISS system and its integration with GPS. The performance of the proposed method is examined by conducting road test experiment in a land vehicle.

High-precision positioning from Global Navigation Satellite Systems (GNSS) has garnered increased interest due to growing demand in various applications, like autonomous car navigation and precision agriculture. Precise Point Positioning (PPP) offers a distinct advantage over differential techniques by enabling precise position determination of a GNSS rover receiver through the use of external corrections sourced from either the Internet or dedicated correction satellites. However, PPP’s implementation has been challenging due to the need to mitigate numerous GNSS error sources, many of which are eliminated in differential techniques such as Real-Time Kinematics (RTK) or overlooked in Standard Point Positioning (SPP). This paper extensively reviews PPP’s error sources, such as ionospheric delays, tropospheric delays, satellite orbit and clock errors, phase and code biases, and site displacement effects. Additionally, this article examines various PPP models and correction sources that can be employed to address these errors. A detailed discussion is provided on implementing the standard dual-frequency (DF)-PPP to achieve centimeter- or millimeter-level positioning accuracy. This paper includes experimental examples of PPP implementation results using static data from the International GNSS Service (IGS) station network and a kinematic road test based on the actual trajectory to showcase DF-PPP development for practical applications. By providing a fusion of theoretical insights with practical demonstrations, this comprehensive review offers readers a pragmatic perspective on the evolving field of Precise Point Positioning.

Global Navigation Satellite Systems (GNSS) is utilized to provide route guidance information to land and autonomous vehicles. The GNSS-based positioning and navigation (POS/NAV) usually suffer from satellite signal blockage, interference, and multipath in urban areas. Autonomous land vehicles are equipped with cameras, radars, and laser ranging devices. The availability of these systems provides an attractive opportunity to increase the POS/NAV system accuracy. This research focuses on the development of an integrated multi-sensor POS/NAV system capable of offering seamless positioning for autonomous land vehicles. A new multi-sensor POS/NAV module integrating both adaptive cruise control frequency modulated continuous wave (ACC-FMCW) radar (RAD), and magnetometer measurements with the reduced inertial sensor system (RISS) was designed to update the navigation system during GNSS outages. Augmenting RAD/RISS system with the magnetometer measurements produces a robust solution. The designed system is further improved by utilizing fast orthogonal search (FOS) to provide nonlinear error modeling of the residual errors associated with the RAD/RISS positioning solution in order to reduce the error growth overextended and frequent GNSS outages.The proposed systems were evaluated on several real road test trajectories involving different types of land vehicles experiencing different motion dynamics. GNSS outages of up to 10 minutes were intentionally introduced to examine the performance. The results show that the proposed methods have resulted in a significant performance improvement in the positioning accuracy that can reach more than 80% if compared to the present techniques that rely only on integrating the inertial sensor technology with GNSS.

The last decade has witnessed a growing demand for precise positioning in many applications including car navigation. Navigating automated land vehicles requires at least sub-meter level positioning accuracy with the lowest possible cost. The Global Navigation Satellite System (GNSS) Single-Frequency Precise Point Positioning (SF-PPP) is capable of achieving sub-meter level accuracy in benign GNSS conditions using low-cost GNSS receivers. However, SF-PPP alone cannot be employed for land vehicles due to frequent signal degradation and blockage. In this paper, real-time SF-PPP is integrated with a low-cost consumer-grade Inertial Navigation System (INS) to provide a continuous and precise navigation solution. The PPP accuracy and the applied estimation algorithm contributed to reducing the effects of INS errors. The system was evaluated through two road tests which included open-sky, suburban, momentary outages, and complete GNSS outage conditions. The results showed that the developed PPP/INS system maintained horizontal sub-meter Root Mean Square (RMS) accuracy in open-sky and suburban environments. Moreover, the PPP/INS system could provide a continuous real-time positioning solution within the lane the vehicle is moving in. This lane-level accuracy was preserved even when passing under bridges and overpasses on the road. The developed PPP/INS system is expected to benefit low-cost precise land vehicle navigation applications including level 2 of vehicle automation which comprises services such as lane departure warning and lane-keeping assistance.

An unprecedented surge of developments in mobile robot outdoor navigation was witnessed after the US government removed selective availability of the global positioning system (GPS). However, in certain situations GPS becomes unreliable or unavailable due to obstructions such as buildings and trees. During GPS outages, a positioning solution with a minimum cost is preferred for small wheeled robots. A low-cost inertial measurement unit (IMU) is a good choice to provide such a solution; however, low-cost MEMS-based inertial sensors suffer from several errors that are stochastic in nature. These errors accumulate and cause a rapid deterioration in the quality of position estimate. The purpose of this paper is to describe an enhanced low-cost 3-D navigation system using a Kalman filter (KF) that integrates odometry from wheel encoders, low cost MEMS-based inertial sensors, and GPS. The proposed technique uses reduced inertial sensor system (RISS). The RISS used here includes three accelerometers and one gyroscope aligned with the vertical axis of the body frame of the robot. The benefits of eliminating the two other gyroscopes normally used are decreasing the cost further, and improving the performance by having less inertial sensors and thus less contribution of these sensors errors towards positional errors. These two eliminated gyroscopes were used to calculate pitch and roll which are now calculated using the two horizontal accelerometers. The experimental results show that, during GPS outages, this KF with velocity update derived from the forward speed from wheel encoders is a good technique for greatly reducing localization errors. Real localization data from one trajectory is presented. This data is post-processed and some simulated GPS outages are introduced to assess the effectiveness of the proposed technique.