In the present study, the effect of microwave power and sample amount on color change kinetics of tea leaves was investigated during microwave drying. Hunter L , a and b system was used for the color change of the materials; and the total color change (Δ E ), chroma, hue angle and browning index (BI) were calculated by using these values. The color of the tea leaves was shifted towards the darker region after the microwave drying process. The mathematical modeling study of color change kinetic showed that a , b , chroma and BI fitted to a first-order kinetic model, while L , total color change (Δ E ) and hue angle followed a zero-order kinetic model. For calculation of the activation energy for color change kinetic parameters, the exponential expression based on Arrhenius equation was used.
In the present study, removal of Reactive Blue 19 dye by using green pea pod as a low-cost adsorbent was investigated. Box–Behnken design was used to determine the independent and interaction influences of process variables of pH, temperature and adsorbent amount. The variance analysis (ANOVA) results showed that the second order model with high coefficient of determination value (R2 = 0.9997) was statistically significant. The experimental results stated that the removal efficiency increased when the pH value decreased and the adsorbent amount increased. The maximum removal (99.42%) was obtained at pH 2, temperature of 35 °C and adsorbent amount of 1.5 g/100 mL. The equilibrium data investigation showed that the Freundlich isotherm model fitted better for removal of dye than did the Langmuir isotherm model. Furthermore, the adsorption kinetic was also evaluated and it was found that the adsorption followed the pseudo second order model for the Reactive Blue 19 removal onto green pea pod.
In the present study, Poly(methyl methacrylate) (PMMA)/single-walled carbon nanotubes (SWCNT) composites were prepared by melt mixing to achieve suitable SWCNT dispersion and distribution and low electrical resistivity, whereby the SWCNT direct incorporation method was compared with masterbatch dilution. An electrical percolation threshold of 0.05–0.075 wt% was found, the lowest threshold value for melt-mixed PMMA/SWCNT composites reported so far. The influence of rotation speed and method of SWCNT incorporation into the PMMA matrix on the electrical properties and the SWCNT macro dispersion was investigated. It was found that increasing rotation speed improved macro dispersion and electrical conductivity. The results showed that electrically conductive composites with a low percolation threshold could be prepared by direct incorporation using high rotation speed. The masterbatch approach leads to higher resistivity values compared to the direct incorporation of SWCNTs. In addition, the thermal behavior and thermoelectric properties of PMMA/SWCNT composites were studied. The Seebeck coefficients vary from 35.8 µV/K to 53.4 µV/K for composites up to 5 wt% SWCNT.