IPIN 2019 Competition, sixth in a series of IPIN competitions, was held at the CNR Research Area of Pisa (IT), integrated into the program of the IPIN 2019 Conference. It included two on-site real-time Tracks and three off-site Tracks. The four Tracks presented in this paper were set in the same environment, made of two buildings close together for a total usable area of 1000 m 2 outdoors and and 6000 m 2 indoors over three floors, with a total path length exceeding 500 m. IPIN competitions, based on the EvAAL framework, have aimed at comparing the accuracy performance of personal positioning systems in fair and realistic conditions: past editions of the competition were carried in big conference settings, university campuses and a shopping mall. Positioning accuracy is computed while the person carrying the system under test walks at normal walking speed, uses lifts and goes up and down stairs or briefly stops at given points. Results presented here are a showcase of state-of-the-art systems tested side by side in real-world settings as part of the on-site real-time competition Tracks. Results for off-site Tracks allow a detailed and reproducible comparison of the most recent positioning and tracking algorithms in the same environment as the on-site Tracks.

Advances in wireless sensor technologies and MEMS have made it possible to automatically monitor the health status of dairy cows using Internet of things (IoT) and wireless body area networks. Since on‐cow measuring devices are energy constrained, a proper characterisation of the off‐body wireless channel between the on‐cow sensor nodes and the back‐end base station is required for an optimised deployment of these networks in barns. In this Letter, the long range (LoRa) off‐body wireless channel has been characterised at 868 MHz, a typical IoT frequency. Both path loss and temporal fading were investigated using LoRa motes. Based on this characterisation, network planning and energy consumption optimisation of the on‐body nodes could be performed, which enables the deployment of reliable dairy cow monitoring systems.

We present a smartphone-based indoor localisation system, able to track pedestrians over multiple floors. The system uses Pedestrian Dead Reckoning (PDR), which exploits data from the smartphone’s inertial measurement unit to estimate the trajectory. The PDR output is matched to a scaled floor plan and fused with model-based WiFi received signal strength fingerprinting by a Backtracking Particle Filter (BPF). We proposed a new Viterbi-based floor detection algorithm, which fuses data from the smartphone’s accelerometer, barometer and WiFi RSS measurements to detect stairs and elevator usage and to estimate the correct floor number. We also proposed a clustering algorithm on top of the BPF to solve multimodality, a known problem with particle filters. The proposed system relies on only a few pre-existing access points, whereas most systems assume or require the presence of a dedicated localisation infrastructure. In most public buildings and offices, access points are often available at smaller densities than used for localisation. Our system was extensively tested in a real office environment with seven 41 m × 27 m floors, each of which had two WiFi access points. Our system was evaluated in real-time and batch mode, since the system was able to correct past states. The clustering algorithm reduced the median position error by $17\%$ in real-time and $13\%$ in batch mode, while the floor detection algorithm achieved a $99.1\%$ and $99.7\%$ floor number accuracy in real-time and batch mode, respectively.

This paper presents a radio frequency (RF)-based location tracking system that improves its performance by eliminating the shadowing caused by the human body of the user being tracked. The presence of such a user will influence the RF signal paths between a body-worn node and the receiving nodes. This influence will vary with the user's location and orientation and, as a result, will deteriorate the performance regarding location tracking. By using multiple mobile nodes, placed on different parts of a human body, we exploit the fact that the combination of multiple measured signal strengths will show less variation caused by the user's body. Another method is to compensate explicitly for the influence of the body by using the user's orientation toward the fixed infrastructure nodes. Both approaches can be independently combined and reduce the influence caused by body shadowing, hereby improving the tracking accuracy. The overall system performance is extensively verified on a building-wide testbed for sensor experiments. The results show a significant improvement in tracking accuracy. The total improvement in mean accuracy is 38.1% when using three mobile nodes instead of one and simultaneously compensating for the user's orientation.

This paper presents a technique and experimental validation for anonymous outdoor location tracking of all users residing on a mobile cellular network. The proposed technique does not require any intervention or cooperation on the mobile side but runs completely on the network side, which is useful to automatically monitor traffic, estimate population movements, or detect criminal activity. The proposed technique exploits the topology of a mobile cellular network, enriched open map data, mode of transportation, and advanced route filtering. Current tracking algorithms for cellular networks are validated in optimal or controlled environments on a small dataset or are merely validated by simulations. In this work, validation data consisting of millions of parallel location estimations from over a million users are collected and processed in real time, in cooperation with a major network operator in Belgium. Experiments are conducted in urban and rural environments near Ghent and Antwerp, with trajectories on foot, by bike, and by car, in the months May and September 2017. It is shown that the mode of transportation, smartphone usage, and environment impact the accuracy and that the proposed AMT location tracking algorithm is more robust and outperforms existing techniques with relative improvements up to 88%. Best performances were obtained in urban environments with median accuracies up to 112 m.

A major burden of signal strength-based fingerprinting for indoor positioning is the generation and maintenance of a radio map, also known as a fingerprint database. Model-based radio maps are generated much faster than measurement-based radio maps but are generally not accurate enough. This work proposes a method to automatically construct and optimize a model-based radio map. The method is based on unsupervised learning, where random walks, for which the ground truth locations are unknown, serve as input for the optimization, along with a floor plan and a location tracking algorithm. No measurement campaign or site survey, which are labor-intensive and time-consuming, or inertial sensor measurements, which are often not available and consume additional power, are needed for this approach. Experiments in a large office building, covering over 1100 m², resulted in median accuracies of up to 2.07 m, or a relative improvement of 28.6% with only 15 min of unlabeled training data.