The direct modeling of masonry infill walls on many buildings, based on damage recorded by various past earthquakes, has become increasingly necessary in order to identify the seismic behavior of these elements, which constitute an important part of reinforced concrete buildings. In this paper, several 3D models were analyzed by the nonlinear static (pushover) method, when ignoring, and when considering, masonry infill walls. The finite element software SAP analyzed the proposed models. These models represent low and mid-rise reinforced concrete buildings infilled with double-leaf hollow bricks. The properties of materials used in Algeria, either in the frame elements or the infill elements, were used. The results obtained were compared according to two parameters, the natural time period of the building and the pushover curve, by varying the values of the dead load and the concrete compressive strength. The results were discussed according to the suggested parameters. The results showed that indirect modeling of such walls, either by taking assumptions embedded in the seismic behavior factor or by means of the macro-modal, can lead to a poor appreciation of the seismic behavior of such buildings. Consequently, direct modeling of walls by the infill of the real void showed acceptable results to some extent. This contributes greatly towards understanding the seismic behavior of this type of building.

The multiple earthquakes have proved the effect of chained masonry walls on the seismic behaviour of multistorey reinforced concrete buildings. The chained masonry walls have been considered one of the types of masonry infill walls but without gaps between the wall and the surrounding frame. This participation came intending to study this effect through the modeling of several two-dimensional frames for a multistorey reinforced concrete building, taking into account the hollow brick walls, which represent the most common type in Algeria. We analyzed the proposed models using ETABS finite element software, relying on the response spectrum method and respecting the most important requirements according to the applicable Algerian Seismic Code. After analysis of the different models, the results have been compared according to the parameters of the period, base shear, lateral displacement, and stiffness. Through a critical synthesis of the results, we concluded that these walls could significantly affect the seismic behaviour of this type of buildings. Moreover, the neglect of these walls in the modeling process can lead designers to have a false perception of the behaviour of these buildings towards seismic loadings.