A new wideband receiver architecture is proposed that employs two separate passive-mixer-based downconversion paths, which enables noise cancelling, but avoids voltage gain at blocker frequencies. This approach significantly relaxes the trade-off between noise, out-of-band linearity and wideband operation. The resulting prototype in 40 nm is functional from 80 MHz to 2.7 GHz and achieves a 2 dB noise figure, which only degrades to 4.1 dB in the presence of a 0 dBm blocker.
Recent studies showed that conventional approaches being used to solve problems imposed by hard-wired metal interconnects will eventually encounter fundamental limits and may impede the advance of future ultralarge-scale integrated circuits (ULSls). To surpass these fundamental limits, we introduce a novel RF/wireless interconnect concept for future inter- and intra-ULSI communications. Unlike the traditional "passive" metal interconnect, the "active" RF/wireless interconnect is based on low loss and dispersion-free microwave signal transmission, near-field capacitive coupling, and modem multiple-access algorithms. In this paper we address issues relevant to the signal channeling of the RF/wireless interconnect and discuss its advantages in speed, signal integrity, and channel reconfiguration. The electronic overhead required in the RF/wireless-interconnect system and its compatibility with the future ULSI and MCM (multi-chip-module) will be discussed as well.
16 August 2017 in IEEE Transactions on Circuits and Systems I: Regular Papers
Convolutional neural network (CNN) offers significant accuracy in image detection. To implement image detection using CNN in the Internet of Things (IoT) devices, a streaming hardware accelerator is proposed. The proposed accelerator optimizes the energy efficiency by avoiding unnecessary data movement. With unique filter decomposition technique, the accelerator can support arbitrary convolution window size. In addition, max-pooling function can be computed in parallel with convolution by using separate pooling unit, thus achieving throughput improvement. A prototype accelerator was implemented in TSMC 65-nm technology with a core size of 5 mm². The accelerator can support major CNNs and achieve 152GOPS peak throughput and 434GOPS/W energy efficiency at 350 mW, making it a promising hardware accelerator for intelligent IoT devices.
1 January 1989 in IEEE Transactions on Electron Devices
In this paper, we explore the use of multi-band radio frequency interconnect (or RF-I) with signal propagation at the speed of light to provide shortcuts in a many core network-on-chip (NoC) mesh topology. We investigate the costs associated with this technology, and examine the latency and bandwidth benefits that it can provide. Assuming a 400 mm2 die, we demonstrate that in exchange for 0.13% of area overhead on the active layer, RF-I can provide an average 13% (max 18%) boost in application performance, corresponding to an average 22% (max 24%) reduction in packet latency. We observe that RF access points may become traffic bottlenecks when many packets try to use the RF at once, and conclude by proposing strategies that adapt RF-I utilization at runtime to actively combat this congestion.