Thermo-chemical conversion of microwave activated wheat straw mixtures with wood or peat pellets is studied experimentally with the aim to provide more effective application of wheat straw for heat energy production. Microwave pre-processing of straw pellets is used to provide a partial decomposition of the main constituents of straw and to activate the thermo-chemical conversion of wheat straw mixtures with wood or peat pellets. The experimental study includes complex measurements of the elemental composition of biomass pellets (wheat straw, wood, peat), DTG analysis of their thermal degradation, FTIR analysis of the composition of combustible volatiles entering the combustor, the flame temperature, the heat output of the device and composition of the products by comparing these characteristics for mixtures with unprocessed and mw pre-treated straw pellets. The results of experimental study confirm that mw pre-processing of straw activates the thermal decomposition of mixtures providing enhanced formation of combustible volatiles. This leads to improvement of the combustion conditions in the flame reaction zone, completing thus the combustion of volatiles, increasing the flame temperature, the heat output from the device, the produced heat energy per mass of burned mixture and decreasing at the same time the mass fraction of unburned volatiles in the products.
The aim of this study was to provide more effective use of straw for energy production by co-firing wheat straw pellets with solid fuels (wood, peat pellets) under additional electric control of the combustion characteristics at thermo-chemical conversion of fuel mixtures. Effects of the DC electric field on the main combustion characteristics were studied experimentally using a fixed-bed experimental setup with a heat output up to 4 kW. An axisymmetric electric field was applied to the flame base between the positively charged electrode and the grounded wall of the combustion chamber. The experimental study includes local measurements of the composition of the gasification gas, flame temperature, heat output, combustion efficiency and of the composition of the flue gas considering the variation of the bias voltage of the electrode. A mathematical model of the field-induced thermo-chemical conversion of combustible volatiles has been built using MATLAB. The results confirm that the electric field-induced processes of heat and mass transfer allow to control and improve the main combustion characteristics thus enhancing the fuel burnout and increasing the heat output from the device up to 14% and the produced heat per mass of burned solid fuel up to 7%.
Promocijas darbā pētīts salmu, koksnes un kūdras granulētās biomasas termiskās sadalīšanas process, gāzveida produktu liesmas virpuļplūsmas dinamika un to kontrole ar ārējo līdzstrāvas elektrisko lauku, lai nodrošinātu efektīvāku siltumenerģijas ražošanu ar samazinātu emisijas gāzes veidošanos. Darbā noteikta lejupvērstās virpuļplūsmas intensifikācija elektriskajā laukā, nodrošinot uzlabotu gaisa virpuļplūsmas sajaukšanos ar biomasas termiskās sadalīšanas gāzes plūsmu, intensificējot konvektīvo masas pārnesi virzienā uz sildvirsmām un palielinot saražotās siltumenerģijas daudzumu biomasas termoķīmiskās konversijas procesā.
22 May 2019 in 19th International Scientific Conference Engineering for Rural Development Proceedings
The main goal of the present study is to promote a more effective use of agriculture residues (straw) as an alternative renewable fuel for cleaner energy production with reduced greenhouse gas emissions. With the aim to improve the main combustion characteristics at thermo-chemical conversion of wheat straw, complex experimental study and mathematical modelling of the processes developing when co-firing wheat straw pellets with a gaseous fuel were carried out. The effect of co-firing on the main gasification and combustion characteristics was studied experimentally by varying the propane supply and additional heat input into the pilot device, along with the estimation of the effect of co-firing on the thermal decomposition of wheat straw pellets, on the formation, ignition and combustion of volatiles (CO, H2). A mathematical model has been developed using the environment of the Matlab (2D modelling) and MATLAB package ”pdepe”(1D modelling) considering the variations in supplying heat energy and combustible volatiles (CO, H2) into the bottom of the combustor. Dominant exothermal chemical reactions were used to evaluate the effect of co-firing on the main combustion characteristics and composition of the products CO2 and H2O. The results prove that the additional heat from the propane flame makes it possible to control the thermal decomposition of straw pellets, the formation, ignition and combustion of volatiles and the development of combustion dynamics, thus completing the combustion of biomass and leading to cleaner heat energy production.