Raimonds Valdmanis

Mr. Raimonds Valdmanis


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 August 2021 in Chemical Engineering & Technology
Verified
Journal Article
Closed access
PDF file
IBInesa Barmina
Inesa Barmina
LGLinards Goldsteins
Linards Goldsteins
RVRaimonds Valdmanis
Raimonds Valdmanis
MZMaija Zake
Maija Zake

9 March 2021 in Processes
Verified
Journal Article
Open access
PDF file
LGLinards Goldsteins
Linards Goldsteins
RVRaimonds Valdmanis
Raimonds Valdmanis
MZMaija Zake
Maija Zake
AAAlexandr Arshanitsa
Alexandr Arshanitsa
AAAnna Andersone
Anna Andersone
The objective of the study was to investigate a more effective use of commercially available biomass pellets (wheat straw, wood, peat) using microwave pretreatment to improve heat production. Pellets were pretreated using the originally designed microwave torrefaction device. The effects of microwave (mw) pretreatment were quantified, providing measurements of the weight loss and elemental composition of pellets and estimating the effect of mw pretreatment on their porosity, surface area and calorific values at pretreatment temperatures of T = 448–553 K. Obtained results show that the highest structural variations and elemental composition during mw pretreatment were obtained for wheat straw pellets, with an increase in reactivity, a decreasing in the duration of the thermal decomposition by about 40% and an increase in the yield of combustible volatiles. Increased reactivity of pretreated pellets enhanced the ignition and burnout of volatiles, decreasing the duration of the burnout of pretreated wheat straw, wood and peat pellets by 40%, 24% and 9%, respectively, and increasing the peak and average values of the flame temperature, heat output, and produced heat energy by 40–50%, with a correlating increase of combustion efficiency and the mass fraction of carbon-neutral CO2 emission. Thus, the applicability of microwave pretreatment for the control and improvement of heat production was confirmed.

4 May 2022 in Energies
Verified
Journal Article
Open access
PDF file
LGLinards Goldsteins
Linards Goldsteins
MDMāris Gunārs Dzenis
Māris Gunārs Dzenis
VSViesturs Sints
Viesturs Sints
RVRaimonds Valdmanis
Raimonds Valdmanis
MZMaija Zake
Maija Zake
AAAlexandr Arshanitsa
Alexandr Arshanitsa
In the present study analysis of co-firing microwave (MW) pre-treated biomass pellets of different origins (wood and wheat straw), with raw pellets (wood, straw, and peat), to control and improve thermochemical conversion of biomass blends and achieve a sustainable use of local energy resources in energy production has been carried out. Effects of MW pre-treatment regimes and composition of blends were studied experimentally using measurements of the weight loss of blends, the yield of volatiles, flame temperature, total heat output from the device, and composition of products. It was found that co-firing MW pre-treated and raw biomass pellets promotes synergistic interaction between components of blends by increasing mass loss rate, the intensity of which depends on the proximate composition of pellets, MW pre-treatment regime and mass fraction of pre-treated pellets in the blend. The most effective synergistic interaction was found when co-firing pre-treated straw or wood pellets with raw peat, which increased the yield of combustible volatiles and heat output from the device as well as improved the composition of emissions. The least effective synergistic interaction was observed when co-firing pre-treated straw with raw wood pellets. Main factors that influenced the thermal and chemical conversion of MW pre-treated blends are discussed considering the effects of MW pre-treatment on the structural changes, elemental and chemical composition, and heating value of pre-treated pellets.

22 April 2019 in Energies
Verified
Journal Article
Open access
PDF file
IBInesa Barmina
Inesa Barmina
AKAntons Kolmickovs
Antons Kolmickovs
RVRaimonds Valdmanis
Raimonds Valdmanis
MZMaija Zake
Maija Zake
SVSergejs Vostrikovs
Sergejs Vostrikovs
USUldis Strautins
Uldis Strautins
The aim of this study was to provide more effective use of straw for energy production by co-firing wheat straw pellets with solid fuels (wood, peat pellets) under additional electric control of the combustion characteristics at thermo-chemical conversion of fuel mixtures. Effects of the DC electric field on the main combustion characteristics were studied experimentally using a fixed-bed experimental setup with a heat output up to 4 kW. An axisymmetric electric field was applied to the flame base between the positively charged electrode and the grounded wall of the combustion chamber. The experimental study includes local measurements of the composition of the gasification gas, flame temperature, heat output, combustion efficiency and of the composition of the flue gas considering the variation of the bias voltage of the electrode. A mathematical model of the field-induced thermo-chemical conversion of combustible volatiles has been built using MATLAB. The results confirm that the electric field-induced processes of heat and mass transfer allow to control and improve the main combustion characteristics thus enhancing the fuel burnout and increasing the heat output from the device up to 14% and the produced heat per mass of burned solid fuel up to 7%.

20 January 2022 in Energies
Verified
Journal Article
Open access
PDF file
LGLinards Goldsteins
Linards Goldsteins
MDMāris Gunārs Dzenis
Māris Gunārs Dzenis
RVRaimonds Valdmanis
Raimonds Valdmanis
MZMaija Zake
Maija Zake
AAAlexandr Arshanitsa
Alexandr Arshanitsa
Possibilities of more efficient use of regional lignocellulosic resources (wood, wheat straw, peat) of different origin for an environmentally friendly energy production using selectively MW pre-treated blends of commercial wood or wheat straw pellets with raw peat pellets are studied. A hypothesis is proposed and tested that selective MW pre-treatment of wood or wheat straw pellets at the frequency 2.45 GHz and blending of MW pre-treated pellets with raw peat pellets can be used to enhance and control the thermo-chemical conversion of biomass blends. To test this hypothesis, a combined experimental study and mathematical modelling of the processes were performed. The thermo-chemical conversion of selectively activated blends was experimentally studied using a batch-size pilot device, which consists of a biomass gasifier and a combustor. To evaluate the effect of selective MW pre-treatment of biomass pellets on the thermo-chemical conversion of pre-treated blends, measurements of the kinetics of weight loss, yield of combustible volatiles, flame temperature, heat output of the device, and composition of emissions were made at different MW pre-treatment regimes of wheat straw and wood pellets and different mass fractions of pre-treated pellets in biomass blends. The developed novel 2D numerical model of thermo-chemical conversion of MW pre-treated straw confirmed that the pre-treatment of wheat straw pellets increases the generated heat and significantly affects the temperature distribution in the flame/bed zones. It was confirmed that MW pre-treatment leads to a faster thermal decomposition of biomass pellets, synergistically activating the non-treated parts of blends. The overall improved yield of combustible volatiles and their complete combustion provide a surplus of heat production by limiting the formation of GHG emissions, which allows promoting MW pre-treated biomass of different origin as efficient regional bioenergy resources for energy production.

28 September 2022 in Energies
Verified
Journal Article
Open access
PDF file
AAAlexandr Arshanitsa
Alexandr Arshanitsa
LJLilija Jashina
Lilija Jashina
MPMatiss Pals
Matiss Pals
RVRaimonds Valdmanis
Raimonds Valdmanis
MZMaija Zake
Maija Zake
In this paper, the thermochemical conversion of selectively pre-treated binary blends composed of 30% microwave (MW) pre-treated biomass pellets (wheat straw, wood) and 70% of different origin raw biomass pellets (wheat straw, wood, or peat) was performed using originally developed experimental device with a heat output up to 20 kW. Biomass pellets were pre-treated at temperatures of 200 and 275 °C using a microwave laboratory scale torrefaction of the original construction. It was established that synergistic effects of interaction between the components of binary blends promote an increase in the efficiency of their thermochemical conversion by 5.8–9.4%. It was assumed that synergistic effects of thermochemical conversion can be related to an increase in surface area and porosity of pre-treated pellets. With a focus on different steps and rates of biomass degradation and heat amounts released for different types of blends, the thermal analysis (DTG/DSC) of ground blends in the temperature range of 25–650 °C was performed in air media with the heating rate of 10 °C/min. According to the thermal analysis data, the heat energy yield of ground blends meets the requirements of linear regression based on the additivity principle and the development of synergistic effects during thermochemical conversion of ground blends was not detected.