Blackbody-sensitive room-temperature infrared detection is a notable development direction for future low-dimensional infrared photodetectors. However, because of the limitations of responsivity and spectral response range for low-dimensional narrow bandgap semiconductors, few low-dimensional infrared photodetectors exhibit blackbody sensitivity. Here, highly crystalline tellurium (Te) nanowires and two-dimensional nanosheets were synthesized by using chemical vapor deposition. The low-dimensional Te shows high hole mobility and broadband detection. The blackbody-sensitive infrared detection of Te devices was demonstrated. A high responsivity of 6650 A W−1 (at 1550-nm laser) and the blackbody responsivity of 5.19 A W−1 were achieved. High-resolution imaging based on Te photodetectors was successfully obtained. All the results suggest that the chemical vapor deposition–grown low-dimensional Te is one of the competitive candidates for sensitive focal-plane-array infrared photodetectors at room temperature.
Conventional artificial intelligence (AI) machine vision technology, based on the von Neumann architecture, uses separate sensing, computing, and storage units to process huge amounts of vision data generated in sensory terminals. The frequent movement of redundant data between sensors, processors and memory, however, results in high-power consumption and latency. A more efficient approach is to offload some of the memory and computational tasks to sensor elements that can perceive and process the optical signal simultaneously. Here, we proposed a non-volatile photomemristor, in which the reconfigurable responsivity can be modulated by the charge and/or photon flux through it and further stored in the device. The non-volatile photomemristor has a simple two-terminal architecture, in which photoexcited carriers and oxygen-related ions are coupled, leading to a displaced and pinched hysteresis in the current-voltage characteristics. For the first time, non-volatile photomemristors implement computationally complete logic with photoresponse-stateful operations, for which the same photomemristor serves as both a logic gate and memory, using photoresponse as a physical state variable instead of light, voltage and memresistance. The polarity reversal of photomemristors shows great potential for in-memory sensing and computing with feature extraction and image recognition for neuromorphic vision.
Two-dimensional (2D) infrared photodetectors always suffer from low quantum efficiency (QE) because of the limited atomically thin absorption. Here, we reported 2D black phosphorus (BP)/Bi 2 O 2 Se van der Waals (vdW) photodetectors with momentum-matching and band-alignment heterostructures to achieve high QE. The QE was largely improved by optimizing the generation, suppressing the recombination, and improving the collection of photocarriers. Note that momentum-matching BP/Bi 2 O 2 Se heterostructures in k -space lead to the highly efficient generation and transition of photocarriers. The recombination process can be largely suppressed by lattice mismatching–immune vdW interfaces. Furthermore, type II BP/Bi 2 O 2 Se vdW heterostructures could also assist fast transport and collection of photocarriers. By constructing momentum-matching and band-alignment heterostructures, a record-high QE of 84% at 1.3 micrometers and 76.5% at 2 micrometers have been achieved in BP/Bi 2 O 2 Se vdW photodetectors.
Optoelectronic memristors possess capabilities of data storage and mimicking human visual perception. They hold great promise in neuromorphic visual systems (NVs). This study introduces the amorphous wide-bandgap Ga2O3 photoelectric synaptic memristor, which achieves 3-bit data storage through the adjustment of current compliance (Icc) and the utilization of variable ultraviolet (UV-254 nm) light intensities. The “AND” and “OR” logic gates in memristor-aided logic (MAGIC) are implemented by utilizing voltage polarity and UV light as input signals. The device also exhibits highly stable synaptic characteristics such as paired-pulse facilitation (PPF), spike-intensity dependent plasticity (SIDP), spike-number dependent plasticity (SNDP), spike-time dependent plasticity (STDP), spike-frequency dependent plasticity (SFDP) and the learning experience behavior. Finally, when integrated into an artificial neural network (ANN), the Ag/Ga2O3/Pt memristive device mimicked optical pulse potentiation and electrical pulse depression with high pattern accuracy (90.7%). The single memristive cells with multifunctional features are promising candidates for optoelectronic memory storage, neuromorphic computing, and artificial visual perception applications.
The past decade has witnessed a dramatic increase in interest in emerging photodetectors built from two-dimensional (2D) layered materials. A major driver of this trend is the growing demands for lightweight, uncooled, and even flexible photodetection technology. However, 2D layered materials always suffer from low light absorption coefficients due to their atomically thin nature. Impact ionization, which can achieve carrier multiplication, is a promising strategy to design 2D photodetectors with high detection efficiency. In this review, typical types of photodetection mechanisms in 2D photodetectors are first summarized. We then discuss the avalanche mechanism induced by impact ionization and avalanche photodetectors based on conventional silicon and III–V compound semiconductors. Finally, a host of emerging avalanche photodetectors based on 2D materials and their van der Waals heterostructures, and their potential applications in the field of photon-counting technologies are detailed. By reviewing the recent progress and discussing challenges faced by 2D avalanche photodetectors, this review aims to provide perspectives on future research directions of 2D material-based ultrasensitive photodetectors such as single-photon detectors.