A reliable, robust, and resilient water recovery system is of paramount importance on board the International Space Station (ISS). Such a system must be able to treat all sources of water, thereby reducing resupply costs and allowing for longer-term space missions. As such, technologies able to dewater urine in microgravity have been investigated by different space agencies. However, despite over 50 years of research and advancements on water extraction from human urine, the Urine Processing Assembly (UPA) and the Water Processor Assembly (WPA) now operating on the ISS still achieve suboptimal water recovery rates and require periodic consumables resupply. Additionally, urine brine from the treatment is collected for disposal and not yet reused. These factors, combined with the need for a life support system capable of tolerating even dormant periods of up to one year, make the research in this field ever more critical. As such, in the last decade, extensive research was conducted on the adaptation of existing or emerging technologies for the ISS context. In virtue of having a strong chemical resistance, small footprint, tuneable selectivity and versatility, novel membrane-based processes have been in focus for treating human urine. Their hybridisation with thermal and biological processes as well as the combination with new nanomaterials have been particularly investigated. This article critically reviews the UPA and WPA processes currently in operation on the ISS, summarising the research directions and needs, highlighted by major space agencies, necessary for allowing life support for missions outside the Low Earth Orbit (LEO). Additionally, it reviews the technologies recently proposed to improve the performance of the system as well as new concepts to allow for the valorisation of the nutrients in urine or the brine after urine dewatering.
1 September 2016 in Desalination and Water Treatment
To minimize scale formation potential in the applications of reverse osmosis (RO) membranes as a pretreatment unit, relatively loose nanofiltration (NF) membrane systems coupled with ultrafiltration (UF) were used to remove divalent ions from seawater. However, the UF did not reject any ions because of pore size. The rejection of divalent ions by NF was in order of sulfate (>95%), magnesium (>60%), and calcium (>30%) in every rejection experiment based on water recovery rate (40, 50, 60, 70, and 80%). In the UF/NF/RO hybrid pilot system, most of the divalent (>99%) and the monovalent (>97%) ions were effectively rejected with slightly increased divalent ion rejection compared to the UF/RO system. Seawater temperature influenced rejection of ions with regards to either the diffusion- or convection-dominant transport of ions through the membrane pores. Electric power consumption was also compared between the UF/NF/RO process and the UF/RO process. For different salinity conditions (28,000 and 45,000 mg/L of total dissolved solids), the lowest energy consumption by NF/RO was 3.3 and 6 kWh/m3 with recovery of 80% for NF and 40% for RO, respectively.
In modern times, humans have contributed to the occurrence of phthalate esters (PEs) in various environmental matrices by consuming plastics that generally contain PEs, which are essential synthetic organic chemicals for fabrication of various consumer products. Five beaches in Ulsan and Busan, South Korea, were investigated for the anthropogenic occurrence of four PEs (dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DnBP), and bis(2-ethylhexyl) phthalate (DEHP)) in beach seawater. Using stir-bar sorptive extraction-thermal desorption-gas chromatography/mass spectrometry, DnBP and DEHP were determined as generally dominant. At Ilsan Beach, both the northern and southern ends showed higher DnBP and DEHP concentrations than the middle of the beach, while DMP and DEP showed similar concentrations at all points. The differences in the DnBP and DEHP concentrations may be related to the fishery industry and domestic sewage inflow to the beach. In addition, a comparison among Ilsan, Imnang, and Songjeong beaches suggested the effects of neighboring industrial areas on the DnBP and DEHP ratio. This study provides information on the effects of seasons, weather events, the proximity of rivers, industrial behavior, and domestic sewage to PE concentrations in beach seawater.
This study investigated the fouling and cleaning behaviors of reverse osmosis (RO) membranes in a lab–scale ultrapure water (UPW) production system via membrane autopsies and characterization of dissolved organic matter (DOM) and membrane foulants. Most of DOM were effectively removed by the MFC filter, with the exception of the peak at 150 Da. The RO membranes were effective in reducing conductivity, DOM, total nitrogen (TN), and ultraviolet A (UVA254nm) concentration; the polishing stage using IER filter resulted in ultra-trace levels of all these parameters required for semiconductor manufacturing (> 18.2 ΩM). The quantity of the desorbed RO membrane foulants, in terms of dissolved organic carbon (DOC), varied considerably depending on the type of desorbing agents: 0.1 N NaCl (65.12 mgC m−2) > 0.1 N NaOH (46.14 mgC m−2) > deionized water (25.39 mgC m−2) > 0.1 N HCl (15.95 mgC m−2). The high cleaning efficiency of the salt solution (0.1 N NaCl) was attributed to the efficient desorption of hydrophilic DOM foulants from the RO membrane surfaces. These results demonstrate that the salt cleaning may provide a promising option to recover the performance of the RO membranes fouled primarily by hydrophilic DOM fractions.
3 November 2015 in Drinking Water Engineering and Science
Recently, rainwater composition affected by atmospheric pollutants has been the topic of intense study in East Asia because of its adverse environmental and human health effects. In the present study, the chemical composition and organic compounds of rainwater were investigated from June to December 2012 at Gwangju in Korea. The aim of this study is to determine the seasonal variation of rainwater chemical composition and to identify possible sources of inorganic and organic compounds. The volume-weighted mean of pH ranged from 3.83 to 8.90 with an average of 5.78. Of rainwater samples, 50 % had pH values below 5.6. The volume-weighted mean concentration (VWMC) of major ions followed the order Cl− > SO42− > NH4+ > Na+ > NO3− > Ca2+ > Mg2+ > K+. The VWMC of trace metals decreased in the order Zn > Al > Fe > Mn > Pb > Cu > Ni > Cd > Cr. The VWMCs of major ions and trace metals were higher in winter than in summer. The high enrichment factors indicate that Zn, Pb, Cu, and Cd originated predominantly from anthropogenic sources. Factor analysis (principal component analysis) indicates the influence of anthropogenic pollutants, sea salt, and crustal materials on the chemical compositions of rainwater. Benzoic acids, 1H-isoindole-1,3(2H)-dione, phthalic anhydride, benzene, acetic acids, 1,2-benzenedicarboxylic acids, benzonitrile, acetaldehyde, and acetamide were the most prominent pyrolysis fragments for rainwater organic compounds identified by pyrolysis gas chromatography/mass spectrometry (Py-GC/MS). The results indicate that anthropogenic sources are the most important factors affecting the organic composition of rainwater in an urban area.