Purpose: – This paper aims to find an optimal surface treatment of commonly used polymeric substrates for achieve the high adhesion of printed structures. For this reason, the investigation of substrates surfaces from different perspectives is presented in this paper. Design/methodology/approach: – The contact angle measurements as well as the roughness measurements were realised for the analysis of surface properties of investigated substrates. The impact of applied chemical agents for surface treatment onto the wettability is analysed for polyimide, polyethylene terephthalate and polyethylene naphthalene substrates. Findings: – The results prove the correlation among wettability, surface energy and work of adhesion with respect to the theoretical background. The surface treatment of polymeric substrates by chemical agents, such as acetone, toluene, ethanol, isopropyl and fluor silane polymer, has a significant impact onto the wettability of substrates which affects the final deposition process of nanoinks. Originality/value: – The main benefit of the surfaces’ investigation presented in this paper lays in surface modification by readily available chemical agents for optimising the deposition process nanoinks used in inkjet printing technology.
Vertically aligned multi-walled carbon nanotubes (VA-MWCNTs) with an average diameter below 80 nm and a thickness of the uniform VA-MWCNT layer of about 16 µm were grown in microwave plasma torch and tested for selected functional properties. IR absorption important for a construction of bolometers was studied by Fourier transform infrared spectroscopy. Basic electrochemical characterization was performed by cyclic voltammetry. Comparing the obtained results with the standard or MWCNT‑modified screen-printed electrodes, the prepared VA-MWCNT electrodes indicated their high potential for the construction of electrochemical sensors. Resistive CNT gas sensor revealed a good sensitivity to ammonia taking into account room temperature operation. Field emission detected from CNTs was suitable for the pressure sensing application based on the measurement of emission current in the diode structure with bending diaphragm. The advantages of microwave plasma torch growth of CNTs, i.e., fast processing and versatility of the process, can be therefore fully exploited for the integration of surface-bound grown CNTs into various sensing structures.
1 November 2019 in Sensors and Actuators B: Chemical
In this work, we demonstrate the simple fabrication process of AlN-based piezoelectric energy harvesters (PEH), which are made of cantilevers consisting of a multilayer ion beam-assisted deposition. The preferentially (001) orientated AlN thin films possess exceptionally high piezoelectric coefficients d33 of (7.33 ± 0.08) pC∙N−1. The fabrication of PEH was completed using just three lithography steps, conventional silicon substrate with full control of the cantilever thickness, in addition to the thickness of the proof mass. As the AlN deposition was conducted at a temperature of ≈330 °C, the process can be implemented into standard complementary metal oxide semiconductor (CMOS) technology, as well as the CMOS wafer post-processing. The PEH cantilever deflection and efficiency were characterized using both laser interferometry, and a vibration shaker, respectively. This technology could become a core feature for future CMOS-based energy harvesters.
The pressure sensor application gained recently substantial interest in many fields of basic and applied research and applications. In this paper, microelectromechanical system (MEMS)-based pressure sensor contains nanostructured electrode consisting of carbon nanotube (CNT) array. CNTs are directly grown on such electrode by plasma-enhanced chemical vapor deposition method using microwave plasma torch at atmospheric pressure. This growth method enables us to use a simple electrode structure without need of buffer layer and time-consuming lithography process. Combination of CNTs field emission and MEMS membrane mechanical properties make possible to enhance sensitivity of the sensor. Field emission properties of CNTs are measured by newly developed system enabling us precise measurement of expecting properties, such as dependence on diaphragm (upper electrode) distance, applied voltage, and stability of the sensor. Measured values are compared with a numerical modeling of the membrane system in CoventorWare software by finite-element method. We also suggest encapsulating the sensor using glass frit bonding because such method is more suitable for high vacuum requirements of the field emission operation.