Harald Rennhofer

Dr. Harald Rennhofer

Universitat fur Bodenkultur Wien, Vienna, Austria
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Harald RennhoferHarald Rennhofer
Harald Rennhofer
BZBenjamin Zanghellini
Benjamin Zanghellini
Dispersion of carbon nanotubes and carbon nanofibers is a crucial processing step in the production of polymer-based nanocomposites and poses a great challenge due to the tendency of these nanofillers to agglomerate. Besides the well-established three-roll mill, the ultrasonic dispersion process is one of the most often used methods. It is fast, easy to implement, and obtains considerably good results. Nevertheless, damage to the nanofibers due to cavitation may lead to shortening and changes in the surface of the nanofillers. The proper application of the sonicator to limit damage and at the same time enable high dispersion quality needs dedicated knowledge of the damage mechanisms and characterization methods for monitoring nano-particles during and after sonication. This study gives an overview of these methods and indicates parameters to be considered in this respect. Sonication energy rather than sonication time is a key factor to control shortening. It seems likely that lower powers that are induced by a broader tip or plate sonicators at a longer running time would allow for proper dispersions, while minimizing damage.

6 November 2018 in Nanomaterials
Verified
Journal Article
Open access
PDF file
GSGerald Singer
Gerald Singer
PSPhilipp Siedlaczek
Philipp Siedlaczek
GSGerhard Sinn
Gerhard Sinn
Harald RennhoferHarald Rennhofer
Harald Rennhofer
MMMatej Mičušík
Matej Mičušík
Helga LichteneggerHelga Lichtenegger
Helga Lichtenegger
Carbon nanotubes (CNT) provide an outstanding property spectrum which can be used to improve a wide range of materials. However, the transfer of properties from the nanoscale to a macroscopic material is a limiting factor. Different approaches of functionalizing the surface of a CNT can improve the interaction with the surrounding matrix but is connected to difficult and expensive treatments, which are usually inconvenient for industrial applications. Here, a simple and eco-friendly method is presented for the oxidation of CNT, where hydrogen peroxide (H2O2) is the only chemical needed and no toxic emissions are released. Also, the extensive step of the incorporation of CNT to an epoxy matrix is simplified to an ultrasonic dispersion in the liquid hardener component. The effectiveness is proven by mechanical tests of produced CNT/CFRP and compared to a conventional processing route. The combination of those simple and cost efficient strategies can be utilized to produce multiscale composites with improved mechanical performance in an ecological and economical way.

16 October 2022 in Cellulose
Verified
Journal Article
Open access
PDF file
JGJuan Guo
Juan Guo
JCJiabao Chen
Jiabao Chen
QMQiulu Meng
Qiulu Meng
LPLeon Ploszczanski
Leon Ploszczanski
JLJian’aN Liu
Jian’aN Liu
Harald RennhoferHarald Rennhofer
Harald Rennhofer
Preservation and conservation of archaeological wooden artifacts is extremely challenging due to a lack of knowledge about the hierarchical structure of preserved cellulose. Herein we report on the comparative analysis of eight archaeological and four recent wood samples from three archaeological sites in China by a variety of methods, including micro-morphology, Fourier Transform Infrared Spectrum, X-ray scattering, chromatographic analysis of wood sugars, and solid state 13C CP/MAS NMR. Results show that deterioration on the microscale is clearly related to a fragmentation of both the cellulose crystallite structure and the cellulose microfibrils. Slightly deteriorated archaeological wood features cellulose crystallites and microfibrils, comparable to non-degraded recent wood, whereas severely deteriorated wood shows higher porosity of the wood cell wall, fragmented cellulose aggregates instead of fibrils and nearly no crystallinity. Alterations in molecular structures resulted in advanced degradation of both amorphous and crystalline cellulose domains. Only a small amount of cellulose was preserved. The data allows to assume highly fragmented but still partially crystalline cellulose lamellas. Graphical abstract

19 January 2021 in Polymers
Verified
Journal Article
Open access
PDF file
BZBenjamin Zanghellini
Benjamin Zanghellini
PKPatrick Knaack
Patrick Knaack
SSSebastian Schörpf
Sebastian Schörpf
KSKarl-Heinz Semlitsch
Karl-Heinz Semlitsch
Helga LichteneggerHelga Lichtenegger
Helga Lichtenegger
Harald RennhoferHarald Rennhofer
Harald Rennhofer
Dispersion of carbon nanotubes and carbon nanofibers is a crucial processing step in the production of polymer-based nanocomposites and poses a great challenge due to the tendency of nanofillers to agglomerate. One of the most effective methods for dispersion is the use of a three-roll mill, which is a well-established method and results in agglomerates below 5 µm. Nevertheless, this process is time-consuming and thus a limiting factor for industrial applications. Our aim was to establish an easy and efficient ultrasonic dispersion process, characterize the dispersion parameters, and compare both methods, ultrasonication and the three-roll mill. We applied rheological tests and analyzed the agglomerate sizes by an image fit of the microscopy images. All these analyses combined deliver a valuable set of information about the dispersion’s quality and, therefore, allows the improvement and further adaptation of the dispersion process.

6 April 2021 in Molecules
Verified
Journal Article
Open access
PDF file
Harald RennhoferHarald Rennhofer
Harald Rennhofer
JKJanea Köhnke
Janea Köhnke
Jozef KeckesJozef Keckes
Jozef Keckes
Johannes TintnerJohannes Tintner
Johannes Tintner
CUChristoph Unterweger
Christoph Unterweger
WGWolfgang Gindl-Altmutter
Wolfgang Gindl-Altmutter
Application of low-cost carbon black from lignin highly depends on the materials properties, which might by determined by raw material and processing conditions. Four different technical lignins were subjected to thermostabilization followed by stepwise heat treatment up to a temperature of 2000 °C in order to obtain micro-sized carbon particles. The development of the pore structure, graphitization and inner surfaces were investigated by X-ray scattering complemented by scanning electron microscopy and FTIR spectroscopy. Lignosulfonate-based carbons exhibit a complex pore structure with nanopores and mesopores that evolve by heat treatment. Organosolv, kraft and soda lignin-based samples exhibit distinct pores growing steadily with heat treatment temperature. All carbons exhibit increasing pore size of about 0.5–2 nm and increasing inner surface, with a strong increase between 1200 °C and 1600 °C. The chemistry and bonding nature shifts from basic organic material towards pure graphite. The crystallite size was found to increase with the increasing degree of graphitization. Heat treatment of just 1600 °C might be sufficient for many applications, allowing to reduce production energy while maintaining materials properties.

1 October 2021 in Carbon Trends
Verified
Journal Article
Open access
CEChristina Enengl
Christina Enengl
ALAlexander Lumetzberger
Alexander Lumetzberger
JDJiri Duchoslav
Jiri Duchoslav
CMCezarina C. Mardare
Cezarina C. Mardare
LPLeon Ploszczanski
Leon Ploszczanski
CFChristian Fürst
Christian Fürst