Hollow nanoarchitectured materials with straight channels play a crucial role in the fields of renewable energy, environment and biotechnology due to their one-dimensional morphology and extraordinary properties. The current challenge is the difficulty on tailoring hollow nanoarchitectures with well-controlled morphology at a relatively low cost. As a conventional technique, electrochemistry exhibits its unique advantage on machining nanostructures. In this review, we present the progress of electrochemistry as a valuable tool in construction of novel hollow nanoarchitectures through pulse/step anodization, such as surface pre-texturing, modulated, branched and multilayered pore architectures, and free-standing membranes. Basic principles for electrochemical engineering of mono- or multi-ordered nanostructures as well as free-standing membranes are extracted from specific examples (i.e. porous silicon, aluminum and titanium oxide). The potential of such nanoarchitectures are further demonstrated for the applications of photovoltaics, water splitting, organic degradation, nanostructure templates, biosensors and drug release. The electrochemical techniques provide a powerful approach to produce nanostructures with morphological complexity, which could have far-reaching implications in the design of future nanoscale systems.

An ultrasensitive nanocalorimeter for use with pl-scale biological samples using silicon microfabrication technology has been developed in which a 720 pl reaction vessel, a calibration heater, and a thermoelectric transducer of 125 μK sensitivity were integrated into a single multilayer thin-film configuration. The resolution of the system ranged from 10 to 25 nW depending on the heat capacity, conductance and power density of the samples studied. The device has been used in heat conduction measurements of the energy released from the enzyme catalyzed hydrolysis of hydrogen peroxide using purified catalase, and for the determination of the catalase activity within a single mouse hepatocyte. The nanocalorimeter has the potential for integration in a high-density array format, where the change in temperature from ultralow volume cellular assays could be used as a generic analytical tool for high throughput screening of bioactive compounds.

In this paper, we present a radiotelemetry sensor, designed as a lab-in-a-pill, which incorporates a two-channel microfabricated sensor platform for real-time measurements of temperature and pH. These two parameters have potential application for use in remote biological sensing (for example they may be used as markers that reflect the physiological environment or as indicators for disease, within the gastrointestinal tract). We have investigated the effects of biofouling on these sensors, by exploring their response time and sensitivity in a model in vitro gastrointestinal system. The artificial gastric and intestinal solutions used represent a model both for fasting, as well as for the ingestion of food and subsequent digestion to gastrointestinal chyme. The results showed a decrease in pH sensitivity after exposure of the sensors for 3 h. The response time also increased from an initial measurement time of 10 s in pure GI juice, to ca. 25 s following the ingestion of food and 80 s in simulated chyme. These in vitro results indicate that changes in viscosity in our model gastrointestinal system had a pronounced effect on the unmodified sensor

Background: The growing pandemic of diabetes mellitus places a stringent social and economic burden on the society. A tight glycemic control circumvents the detrimental effects, but the prerogative is the development of new more effective tools capable of longterm tracking of blood glucose (BG) in vivo. Such discontinuous sensor technologies will benefit from an unprecedented marked potential as well as reducing the current life expectancy gap of eight years as part of a therapeutic regime. Method: A sensor technology based on osmotic pressure incorporates a reversible competitive affinity assay performing glucose-specific recognition. An absolute change in particles generates a pressure that is proportional to the glucose concentration. An integrated pressure transducer and components developed from the silicon micro- and nanofabrication industry translate this pressure into BG data. Results: An in vitro model based on a 3.6 × 8.7 mm large pill-shaped implant is equipped with a nanoporous membrane holding 4–6 nm large pores. The affinity assay offers a dynamic range of 36–720 mg/dl with a resolution of ±16 mg/dl. An integrated 1 × 1 mm² large control chip samples the sensor signals for data processing and transmission back to the reader at a total power consumption of 76 μW. Conclusions: Current studies have demonstrated the design, layout, and performance of a prototype osmotic sensor in vitro using an affinity assay solution for up to four weeks. The small physical size conforms to an injectable device, forming the basis of a conceptual monitor that offers a tight glycemic control of BG.