The primary aim of this review article is to find the influence of wastewater and its characteristics on recycling as an alternative to potable water for concrete preparation. On the other hand, scarcity, and the demand for freshwater for drinking are also increasing day by day around the globe. About a billion tons of freshwater is consumed daily for concrete preparation for various operations such as mixing and curing, to name a few. The rapid development of certain industries such as textile, casting, stone cutting, and concrete production has caused the water supply to be severely affected. Recycling wastewater in concrete offers various potential benefits like resource conservation, environmental protection, cost savings, and enhanced sustainability. This article reviews the effect of various types of wastewater on various physical and chemical properties of wastewater, rheological characteristics, strength, durability, and microstructure properties of concrete. It also explores the potential effects of decomposing agents on enhancing concrete properties. Currently, limited research is available on the use of various types of wastewater in concrete. Hence, there is a need to develop various methods and procedures to ensure that the utilization of wastewater and treated wastewater is carried out in the production of concrete in a sustainable manner. Although wastewater can reduce the workability of fresh concrete, it can also increase its strength and long-term performance of concrete. The use of various types of wastewater, such as reclaimed water and tertiary-treated wastewater, was found to be superior compared to those using industrial- or secondary-treated wastewater. Researchers around the globe agree that wastewater can cause various detrimental effects on the mechanical and physical properties of concrete, but the reductions were not significant. To overcome limited scientific contributions, this article reviews all the available methods of using various types of wastewater to make concrete economically and environmentally friendly. This research also addresses possible challenges with respect to the demand for freshwater and the water crisis.

Sea Water Intrusion (SWI) is one of the major hydrological problem in coastal aquifers. This global issue is aggravated by increasing demands for freshwater in coastal regions. In this paper, different approaches of modeling SWI and the parameters affecting the process of SWI are introduced. This is followed by the discussion on the numerical models to solve the complex, three dimensional (3D) groundwater and solute transport problems in coastal aquifer. The importance of considering aquifer characteristics while modeling the groundwater system for flow and solute transport is emphasized. A brief discussion on previous methodology, novelty and limitations on direct simulation of SWI are tabulated. The significant aspects to be considered while direct modeling of coastal aquifers are discussed and the recent focus of research in this area of interest are stated. In direct modeling, information on aquifer parameters are often unknown, therefore, an inverse approach is explained briefly. The previous studies relating to determistic inverse modeling for coupled groundwater flow and solute transport problems reported in literature are summarized. The insights about prior information, estimated parameter sensitivities, variances and correlations are reported. The paper identifies some of the existing gaps in the modeling of SWI based on the previous work and provides comprehensive understanding on direct and deterministic inverse SWI modeling.

The aquifer heterogeneity is often simplified while conceptualizing numerical model due to lack of field data. Conducting field measurements to estimate all the parameters at the aquifer scale may not be feasible. Therefore, it is essential to determine the most significant parameters which require field characterization. For this purpose, the sensitivity analysis is performed on aquifer parameters, viz., anisotropic hydraulic conductivity, effective porosity and longitudinal dispersivity. The results of the sensitivity index and root mean square deviation indicated, that the longitudinal dispersivity and anisotropic hydraulic conductivity are the sensitive aquifer parameters to evaluate seawater intrusion in the study area. The sensitive parameters are further characterized at discrete points or at local scale by using regression analysis. The longitudinal dispersivity is estimated at discrete well points based on Xu and Eckstein regression formula. The anisotropic hydraulic conductivity is estimated based on established regression relationship between hydraulic conductivity and electrical resistivity with R² of 0.924. The estimated hydraulic conductivity in x and y-direction are upscaled by considering the heterogeneous medium as statistically homogeneous at each layer. The upscaled model output is compared with the transversely isotropic model output. The bias error and root mean square error indicated that the upscaled model performed better than the transversely isotropic model. Thus, this investigation demonstrates the necessity of considering spatial heterogeneous parameters for effective modelling of the seawater intrusion in a layered coastal aquifer.

Investigation of groundwater consumption to cope with the inadequate piped water supply in continuous and intermittent supply systems: A case study in Bangalore, India