Jingyun Chung

Prof. Jingyun Chung


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 December 2014 in Frontiers of Information Technology & Electronic Engineering
Verified
Journal Article
Closed access
PDF file
YWYu-Jing Wu
Yu-Jing Wu
JCJingyun Chung
Jingyun Chung
Controller area networks (CANs) have been designed for multiplexing communication between electronic control units (ECUs) in vehicles and many high-level i

30 June 2022 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
YWYujing Wu
Yujing Wu
JLJinze Li
Jinze Li
YXYinan Xu
Yinan Xu
JCJingyun Chung
Jingyun Chung
YDYilin Dai
Yilin Dai
YXYihu Xu
Yihu Xu
The intelligent vehicle terminal T-BOX of intelligent connected vehicles (ICVs) is directly connected to the vehicle interface and constantly exchanges real-time data inside and outside the vehicle, which significantly increases the communication pressure on the in-vehicle network. Excessive data will increase the load on the channel due to the limited bandwidth of the vehicle. Although the existing data compression algorithm can effectively reduce the communication pressure, it requires significant driving data to count the number of signal changes, which increases the preliminary labor cost. Meanwhile, it is difficult to meet the stable compression rate using a static configuration when a large amount of CAN data is transmitted with fluctuating data changes, which cannot satisfy the requirement of reducing the bus load rate, and satisfying the real-time requirements of ICV is challenging. Thus, we propose a real-time dynamic data compression algorithm for vehicles to satisfy such requirements. The experiments show that for the frequently changing signals, the proposed algorithm can improve the compression rate by about 10% compared with the existing compression algorithm. The execution time of the compression process is 4.55 μs at a clock frequency of 400 MHz and the decompression process execution time is 86.48 μs. Compared with the bus load when the original message is transmitted, the proposed algorithm can reduce the bus load by 19% on average. In the future, a stable compression rate will be crucial when loading authentication codes on the CAN to ensure its security.

12 November 2020 in International Journal of Automotive Technology
Verified
Journal Article
Closed access
PDF file
YKYeon-Jin Kim
Yeon-Jin Kim
YZYang Zou
Yang Zou
YKYoung-Eun Kim
Young-Eun Kim
JCJingyun Chung
Jingyun Chung

3 September 2021 in IEEE Access
Verified
Journal Article
Open access
YKYeon-Jin Kim
Yeon-Jin Kim
SWSamuel Woo
Samuel Woo
JCJingyun Chung
Jingyun Chung
The development of automotive-information & communication technology (ICT) convergence has resulted in various vehicle-based electrical/electronic (E/E) systems. An automotive E/E system consists of one or more electronic control units (ECUs), sensors and actuators. As ECUs are growing in popularity, it is necessary to have an efficient communication protocol for in-vehicle networks. Hence, a controller area network (CAN) protocol was developed by Bosch. CAN systems have been successfully applied in many areas, including the automotive industry, due to their high immunity to electrical interference and low cost. However, since the CAN protocol was designed without regard to information security functions, it has many vulnerabilities. With the commercialization of connected/autonomous cars, vehicle-based wireless communication systems have appeared, and are expected to grow in popularity. This increases the number of attack surfaces that can potentially threaten in-vehicle CAN. To combat the vulnerabilities of the CAN protocol, the CAN data field should be encrypted and transmitted with authentication codes. Recently, a method of transmitting authentication codes by modifying the CAN protocol was proposed. However, changing the original CAN protocol can cause serious problems in CAN systems. In this paper, to enhance CAN security, a data compression algorithm is used to reduce the data frame length so that there is space for a message authentication code (MAC) to be contained inside the data field. The proposed algorithm guarantees that all CAN frames are authenticated by a MAC of at least four bytes without any change of the original CAN protocol. Simulations using CAN data from Kia Sorento, Kia Soul, and LS Mtron vehicles show that the proposed algorithm works successfully with only a slight increase in the peak load.

14 July 2023 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
Yousik LeeYousik Lee
Yousik Lee
YKYong-Eun Kim
Yong-Eun Kim
JCJingyun Chung
Jingyun Chung
SWSamuel Woo
Samuel Woo
The vulnerabilities of controller area network (CAN) are often targeted by various types of vehicle hacking. To this end, conventional cyber attacks have used a frame injection and a dominant bit injection. However, these two techniques cannot modify data frames sent from an electronic control unit (ECU) in real time. Thus, the frame injection cannot perfectly control the target system. The dominant bit injection can only perform denial of service (DoS) attacks, which means that it cannot perfectly control the ECU. In this paper, we propose a new attack technique for modifying either dominant or recessive bits represented in a CAN bus as the attacker intends. This technique is called perfect bit modification (PBM). We introduce two attack models using the PBM technique, the bus possession attack (BPA) and the target ID attack (TIA). The BPA can perform an attack without breaking the communication pattern of the CAN bus, and the TIA can perfectly seize control of a specific ECU. In addition, we produce an attack tool with the PBM functionality using the SN65HVD230 (CAN transceiver) and the FDS8949 (MOSFET). Both SN65HVD230 and FDS8949 are components that are commonly used to build ECUs, which cost less than two dollars. This means that our attack models are likely to be utilized for supply chain attacks. To demonstrate the feasibility of BPA and TIA, we conduct attack experiments using two real vehicles. Finally, we analyze the characteristics of existing attack techniques including PBM and suggest countermeasures to construct a secure CAN environment.

18 February 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JPJinhui Piao
Jinhui Piao
SJShiyi Jin
Shiyi Jin
DSDong-Hyun Seo
Dong-Hyun Seo
SWSamuel Woo
Samuel Woo
JCJingyun Chung
Jingyun Chung
Information security in a controller area network (CAN) is becoming more important as the connections between a vehicle’s internal and external networks increase. Encryption and authentication techniques can be applied to CAN data frames to enhance security. To authenticate a data frame, a message authentication code (MAC) needs to be transmitted with the CAN data frame. Therefore, space for transmitting the MAC is required within the CAN frame. Recently, the Triple ID algorithm has been proposed to create additional space in the data field of the CAN frame. The Triple ID algorithm ensures every CAN frame is authenticated by at least 4 bytes of MAC without changing the original CAN protocol. However, since the Triple ID algorithm uses six header bits, there is a problem associated with low data compression efficiency. In this paper, we propose an algorithm that can remove up to 15 bits from frames compressed with the Triple ID algorithm. Through simulation using CAN signals of a Kia Sorento vehicle and an LS Mtron tractor, we show that the generation of frames containing compressed messages of 4 bytes or more is reduced by up to 99.57% compared to the Triple ID method.