Aqueous mixtures of cationic hexadecyltrimethylammonium chloride (CTAC) and nonionic pentaethyleneglycol monododecyl ether (C₁₂E₅) are investigated. Adsorption layer properties are systematically studied within a wide concentration range for a 1:1 molar ratio of the surfactants. Surface tension and dilatational rheology measurements are conducted by profile analysis tensiometry. The interfacial data are juxtaposed to drainage kinetics and stability results for microscopic foam films, investigated by microinterferometric thin liquid film instrumentation. The obtained results give experimental evidence of synergistic interactions in the studied solutions, as compared to the corresponding single surfactant systems. Specific runs of dynamic and equilibrium surface tension curves are registered against the total surfactant quantity; the surface dilatational elasticities for the mixtures are systematically higher. A clear correlation is established between adsorption layer performance and foam film characteristics. The maxima of the film lifetimes are well outlined, and the respective values are shifted towards lower overall concentrations. The reported results substantiate the key role of the adsorption layers, and the surface dilatational properties in particular, for foam film drainage kinetics and stability. The well-expressed synergy observed in adsorption layer and foam film properties suggests the substantial benefits of using mixed surfactant systems in the design and fine-tuning of foam systems for innovative applications.

We studied silica suspensions with chitosan and biodegradable synthetic surfactant lauroyl ethyl arginate (LAE). Hydrophilic and negatively charged silica nanoparticles were neutralised due to the coating with chitosan. That presence of LAE led to the partial hydrophobisation of their surface, which favoured their attachment to the surface of a thin foam film. It was found that the presence of small and medium-sized (6–9 nm) hydrophobic particles in the interfacial layer of lamella foam film inhibited the coalescence and coarsening processes, which prolonged the life of the foam. Furthermore, hydrophobising of 30 nm particles allowed the formation of large aggregates precipitating from the mixture under steady-state conditions. These aggregates, however, under the conditions of the dynamic froth flotation process in the foam column, were floated into the foam layer. As a result, they were trapped in the foam film and Plateau borders, effectively preventing liquid leakage out of the foam. These results demonstrate the efficiency of using chitosan-LAE mixtures to remove silica nanoparticles from aqueous phase by foaming and flotation.