The present work is based on the photovoltaic properties of multilayered structure of Bismuth ferrite (BFO) and Barium titanate (BTO) thin films prepared by pulsed laser deposition technique on platinum coated silicon substrate. The multilayered structure possesses enhanced ferroelectric properties and shows a remarkable increase in photocurrent (from 1.56 × 10−7 A to 6.96 × 10−5 A) upon illumination with laser light of wavelength 405 nm at an intensity of 160 mW/cm2. The values of short circuit photocurrent and open circuit voltage were found to be 0.3184 mA/cm2 and −1.25 V, respectively, with a light-to-electricity conversion efficiency of 0.067%. A relatively high efficiency calculated at 405 nm for the developed multilayered BFO/BTO structure highlights its practical application in ferroelectric photovoltaics.
This research work aims at proposing cheap, facile, sensitive and selective assembly of three electrode electrochemical hydrogen (H2) gas sensor which operates on room temperature in ambient conditions. Palladium oxidereduced graphene oxide (PdO-rGO) nanocomposite have been synthesized using insitu chemical sol-gel method and modified Hummer’s method. The phase, structure, particle size and bonding information have been obtained using X-ray diffraction (XRD) analysis, Transmission electron microscopy (TEM), Fourier Transform Infrared (FTIR) spectroscopy and Ultraviolet-Visible (UV-Vis) absorption spectroscopy. Palladium oxide (PdO) nanoparticles of size ranging from 30 to35 nm have been successfully attached with uniform 2D network of reduced graphene oxide (rGO) sheets which offers large surface area for H2 adsorption. The thin film of nanocomposite have been fabricated on conducting Indium tin oxide (ITO) glass substrates using electrophoretic deposition (EPD) process and is employed as working electrode (WE) in indigenously developed three electrode cell. Thin film surface morphology have been observed using Scanning Electron Microscopy (SEM) and it shows agglomerates of PdO nanoparticles with multiple randomly stacked rGO nanosheets uniformly spread across surface of the film. The amperometric response of the assembled electrochemical sensor has been recorded for the detection of 10 to 80 percent concentration of hydrogen gas using potentiostat/galvanostat autolab. The sensitivity of sensor is found out to be 0.462 lA/and selectivity of the sensor has been enhanced using H2 insensitive reference electrode (RE) and solid polymer electrolyte gas permeable membrane respectively which will aid new dimensions in designing robust H2 sensor at room temperature.