Increased sensitivity to change in surrounding index is shown by etching the core of a fiber Bragg grating. A maximum sensitivity of 1394 nm/riu is achieved as the surrounding index approaches the core index. Assuming a detectable spectral resolution of 0.01 nm realized in the experiment, the sensor achieves a minimum detectable index resolution of 7.2/spl times/10/sup -6/ when the index of the surrounding medium is 1.44. The sensor can be used as a chemical and biosensor and multiple sensors can be multiplexed and interrogated along a single fiber.
5 December 2005 in IEEE Journal of Selected Topics in Quantum Electronics
Highly sensitive fiber Bragg grating sensors were developed by etching away the cladding and part of the core of the fiber and detecting the change of Bragg wavelength due to the change of index of the surrounding medium. A sensitivity of 1394 nm/riu was achieved when the diameter of the grating core was 3.4 /spl mu/m and the index of the surrounding medium was close to the index of the core of the fiber. Assuming a detectable spectral resolution of 0.01 nm realized in the experiment, the sensor achieves a minimum detectable index resolution of 7.2/spl times/10/sup -6/. Higher sensitivity at lower surrounding index was achieved by using higher order modes excited in the Bragg grating region. The use of the fiber Bragg grating sensor was further investigated to detect hybridization of DNA. Single stranded DNA oligonucleotide probes of 20 bases were immobilized on the surface of the fiber grating using relatively common glutarahyldehyde chemistry. Hybridization of complimentary target single strand DNA oligonucleotide was monitored in situ and successfully detected. The demonstrated fiber Bragg grating sensors provide an elegant method to monitor biological changes in an in situ manner, and provide temporal information in a single experiment.
The absorption spectrum of F2 in the 780–1020 Å range has been photographed at sufficient resolution to allow a rotational analysis of many bands. A large number of vibrational levels of three ionic states have been observed and their rotational constants determined. Many perturbations in the rotational structure caused by the interaction between the three states have been investigated and the interaction energies determined. The rotational and vibrational structures of a few Rydberg states have also been analyzed in detail but no Rydberg series have been identified. The difficulties in assigning the observed states are discussed. A 1Σu+ – X1Σg+ emission band system has been observed in the 1100 Å region. An analysis of the bands of this system has allowed us to determine the term values and rotational constants of all the vibrational levels of the ground state with ν ≤ 22. The dissociation energy, D0(F2), is found to be greater than 12 830 and is estimated to be 12 920 ± 50 cm−1.
One promising application of photonics to astronomical instrumentation is the miniaturization of near-infrared (NIR) spectrometers for large ground- and space-based astronomical telescopes. Here we present new results from our effort to fabricate arrayed waveguide grating (AWG) spectrometers for astronomical applications entirely in-house. Our latest devices have a peak overall of ∼23%, a spectral resolving power (λ/δλ) of ~1300, and cover the entire H band (1450−1650 nm) for Transverse Electric (TE) polarization. These AWGs use a silica-on-silicon platform with a very thin layer of Si3N4 as the core of the waveguides. They have a free spectral range of ~10 nm at a of ~1600 about wavelength nm and a contrast ratio or crosstalk of 2% (−17 dB). Various practical aspects of implementing AWGs as astronomical spectrographs are discussed, including the coupling of the light between the fibers and AWGs, high-temperature annealing to improve the throughput of the devices at ~1500 nm, cleaving at the output focal plane of the AWG to provide continuous wavelength coverage, and a novel algorithm to make the devices polarization insensitive over a broad band. These milestones will guide the development of the next generation of AWGs with wider free spectral range and higher resolving power and throughput.
For decades, progress in the field of optical (including solar) energy conversion was dominated by advances in the conventional concentrating optics and materials design. In recent years, however, conceptual and technological breakthroughs in the fields of nanophotonics and plasmonics combined with a better understanding of the thermodynamics of the photon energy-conversion processes reshaped the landscape of energy-conversion schemes and devices. Nanostructured devices and materials that make use of size quantization effects to manipulate photon density of states offer a way to overcome the conventional light absorption limits. Novel optical spectrum splitting and photon-recycling schemes reduce the entropy production in the optical energy-conversion platforms and boost their efficiencies. Optical design concepts are rapidly expanding into the infrared energy band, offering new approaches to harvest waste heat, to reduce the thermal emission losses, and to achieve noncontact radiative cooling of solar cells as well as of optical and electronic circuitries. Light–matter interaction enabled by nanophotonics and plasmonics underlie the performance of the third- and fourth-generation energy-conversion devices, including up- and down-conversion of photon energy, near-field radiative energy transfer, and hot electron generation and harvesting. Finally, the increased market penetration of alternative solar energy-conversion technologies amplifies the role of cost-driven and environmental considerations. This roadmap on optical energy conversion provides a snapshot of the state of the art in optical energy conversion, remaining challenges, and most promising approaches to address these challenges. Leading experts authored 19 focused short sections of the roadmap where they share their vision on a specific aspect of this burgeoning research field. The roadmap opens up with a tutorial section, which introduces major concepts and terminology. It is our hope that the roadmap will serve as an important resource for the scientific community, new generations of researchers, funding agencies, industry experts, and investors.
Astrophotonics is the application of photonic technologies to channel, manipulate, and disperse light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. Utilizing photonic advantage for astronomical spectroscopy is a promising approach to miniaturizing the next generation of spectrometers for large telescopes. It can be primarily attained by leveraging the two-dimensional nature of photonic structures on a chip or a set of fibers, thus reducing the size of spectroscopic instrumentation to a few centimeters and the weight to a few hundred grams. A wide variety of astrophotonic spectrometers is currently being developed, including arrayed waveguide gratings (AWGs), photonic echelle gratings (PEGs), and Fourier-transform spectrometer (FTS). These astrophotonic devices are flexible, cheaper to mass produce, easier to control, and much less susceptible to vibrations and flexure than conventional astronomical spectrographs. The applications of these spectrographs range from astronomy to biomedical analysis. This paper provides a brief review of this new class of astronomical spectrographs.