Flow condition was simulated in a shaft tubular pump by using the Shear‐Stress Transport (SST) k‐ω turbulence model with high quality structured grids in design condition. Corresponding structural vibration characteristics were then analyzed based on two‐way coupled Fluid‐Structure Interaction (FSI) method. Fluid results showed that flow in the outlet flow passage was a combination of the axial flow and circumferential rotation motion. Time and frequency domain analysis of pressure pulsation of typical measure points indicated that larger pulsation amplitudes appeared in the tip of the blades and the main vibration source was the pressure pulsation induced by rotation of the blades. The fluid pulsation amplitudes decreased gradually along the flow direction, which can be ascribed to the function of fixed guide vane. Structural analysis of the blades in both pressure and suction side indicated that significant stress concentration was formed at the blade and hub connection near the leading edge. Maximum effective stress of the blades varied periodically, so prevention measures of the fatigue of blades should be taken. This research can provide important reference for the design of the tubular pump.

It is of significant value to understand the unsteady hydraulic features and pressure pulsation transmission path in the flow channel through a turbine for providing technical support for turbine design and optimization, as well as laying a foundation for analysis of the stability and the coupled vibration of the hydropower house. In this paper, a three-dimensional mechanics–hydraulics–concrete structure coupled numerical model was established to accurately simulate Francis hydraulic machinery, including the high-rotating turbine runner and fixed guide vane, the unsteady flowing water, the structure of the entire flow channel, as well as the dynamic interaction between them. Turbulent hydraulic features of flow condition and pressure pulsation in design operation were explored using the detached eddy simulation (DES) turbulence model. Then, a novel method was proposed to identify the fluid pressure pulsation transmission path based on the time-delayed transfer entropy method and wavelet theory. On basis of time and frequency analysis of pressure calculation results, investigation into identification of pressure pulsation transmission path was performed using the method of traditional transfer entropy and the method adopted in this paper. The pressure pulsation transmission features in the entire flow channel were revealed during operation of the large-scale Francis turbine. The research method and results could not only lay a basis for exploring the structural vibration regularity of the hydropower house but also provide a scientific reference for vibration reduction design of the hydropower house.

This article aims to explore the vibration transmission path in the hydropower house using the time-delayed transfer entropy method. A three-dimensional fluid-concrete structure-hydraulic machinery coupling simulation model of the Xiangjiaba hydropower house was established, and the vibration acceleration and equivalent stress of the structure were calculated in the time domain based on the two-way iterative fluid-structure interaction method. The characteristic indexes of information transmission were quantitatively presented, including the rate of information transmission, transmission path contribution, to describe the vibration energy transmission paths and transmission characteristics of different vibration variables as well as different directions of the same variable in the hydropower house. The study indicates that the vertical acceleration can identify more abundant vibration transmission paths, and the lower bracket contributes most to the vibration transmission of the powerhouse. The research outcome can provide a scientific basis for structural optimization, vibration attenuation, and isolation design of the hydropower house.

In the assessment of the seismic performance of ultrahigh‐arch dams, challenges such as complex structural models, extensive degrees of freedom, and extended computation times are commonly encountered. Consequently, there is a pressing need to develop a more streamlined and effective approach for investigating the seismic behavior of ultrahigh‐arch dams. The endurance time method, a novel approach in seismic analysis, is increasingly favored for the dynamic analysis of large structures. In this study, the dynamic damage characteristics of an ultrahigh‐arch dam are analyzed based on the endurance time method, and the seismic fragility analysis is evaluated. Utilizing a case study of an ultrahigh‐arch dam in southwest China, a comprehensive three‐dimensional nonlinear model encompassing dam, bedrock, and water interactions is developed. This model incorporates considerations of dam and bedrock damage, cracking, dynamic behavior of contraction joints, and the interaction between the dam and reservoir water. The nonlinear least‐squares function is used to generate three endurance time acceleration functions (ETAFs) based on the response spectra of the hydraulic structure seismic design standard. The dynamic analysis of the above model is carried out by using the endurance time method and the incremental dynamic analysis (IDA) method. The results indicate that the endurance time method can well reflect the fragility of ultrahigh‐arch dams under different intensities of ground motions, with significant computational efficiency.