Fingerprinting (FP) significantly improves the indoor localization performance in non-line-of-sight-dominated areas. However, its deployment and maintenance is cost-intensive as it needs ground-truth reference systems for both the initial training and the adaption to environmental changes. Recently, channel charting (CC) has been investigated because it is an unsupervised method that does not need labeled measurement data. CC uses pairwise-distance metrics to estimate the physical distance between channel-state-information (CSI) measurements in the proximity. CC can then learn the underlying manifold of the channel measurements. While CC has shown promising results in modelling the local geometry of the radio environment, a deeper insight into CC for localization using multi-anchor large-bandwidth measurements is still pending. We therefore contribute a novel distance metric for CC that approaches a global linear correlation to the physical distance based on time-synchronized single-input/single-output (SISO) CSIs. This allows to learn the environment’s global geometry in a channel chart without annotations. We leverage a Siamese network, which enables CC-assisted FP only using a linear transformation from the chart to the real-world coordinates. We compare our approach to the state-of-the-art of CC on two different real-world data sets recorded with a 5G and UWB radio setup. Unlike FP-based localization which needs a large number of labeled data points to achieve a superior localization accuracy, our approach outperforms FP when only a few labeled data samples are available.

Radio-based locating systems allow for a robust and continuous tracking in industrial environments and are a key enabler for the digitalization of processes in many areas such as production, manufacturing, and warehouse management. Time difference of arrival (TDoA) systems estimate the time-of-flight (ToF) of radio burst signals with a set of synchronized antennas from which they trilaterate accurate position estimates of mobile tags. However, in industrial environments where multipath propagation is predominant it is difficult to extract the correct ToF of the signal. This article shows how deep learning (DL) can be used to estimate the position of mobile objects directly from the raw channel impulse responses (CIR) extracted at the receivers. Our experiments show that our DL-based position estimation not only works well under harsh multipath propagation but also outperforms state-of-the-art approaches in line-of-sight situations.

Every year, for ten years now, the IPIN competition has aimed at evaluating real-world indoor localisation systems by testing them in a realistic environment, with realistic movement, using the EvAAL framework. The competition provided a unique overview of the state-of-the-art of systems, technologies, and methods for indoor positioning and navigation purposes. Through fair comparison of the performance achieved by each system, the competition was able to identify the most promising approaches and to pinpoint the most critical working conditions. In 2020, the competition included 5 diverse off-site off-site Tracks, each resembling real use cases and challenges for indoor positioning. The results in terms of participation and accuracy of the proposed systems have been encouraging. The best performing competitors obtained a third quartile of error of 1 m for the Smartphone Track and 0.5 m for the Foot-mounted IMU Track. While not running on physical systems, but only as algorithms, these results represent impressive achievements.

Radio frequency (RF)-based localization yields centimeter-accurate positions under mild propagation conditions. However, propagation conditions predominant in indoor environments (e.g. industrial production) are often challenging as signal blockage, diffraction and dense multipath lead to errors in the time of flight (TOF) estimation and hence to a degraded localization accuracy. A major topic in high-precision RF-based localization is the identification of such anomalous signals that negatively affect the localization performance, and to mitigate the errors introduced by them. As such signal and error characteristics depend on the environment, data-driven approaches have shown to be promising. However, there is a trade-off to a bad generalization and a need for an extensive and time-consuming recording of training data associated with it. We propose to use generative deep learning models for out-of-distribution detection based on channel impulse responses (CIRs). We use a Variational Autoencoder (VAE) to predict an anomaly score for the channel of a TOF-based Ultra-wideband (UWB) system. Our experiments show that a VAE trained only on line-of-sight (LOS) training data generalizes well to new environments and detects non-line-of-sight CIRs with an accuracy of 85%. We also show that integrating our anomaly score into a TOF-based extended Kalman filter (EKF) improves tracking performance by over 25%.

Circuit cutting, the partitioning of quantum circuits into smaller independent fragments, has become a promising avenue for scaling up current quantum-computing experiments. Here, we introduce a scheme for joint cutting of two-qubit rotation gates based on a virtual gate-teleportation protocol. With that, we significantly lower the previous upper bounds on the sampling overhead and prove the optimality of the scheme. Furthermore, we show that no classical communication between the circuit partitions is required. For parallel two-qubit rotation gates we derive an optimal ancilla-free decomposition, which includes cnot gates as a special case.