Reverse Engineering (RE) is a long-term goal of engineering and computer science; it aims at the reconstruction of CAD models from measured data by means of 3D mathematical surfaces and geometrical features representing the geometry of a physical part. In the last two decades, reviews and surveys have occasionally covered this topic, but a systematic dissertation of modeling methods from a mechanical engineering point of view is still missing. The purpose of this paper is to fill this gap; starting from a general description of the overall RE framework (acquisition, segmentation, classification, fitting), both an up-to-date survey and a categorization of available modeling techniques and tools working on 3D data are provided. The main aspects of various strategies are discussed as well, in order to highlight strengths and weaknesses characterizing different approaches. Moreover, an overview of commercial software for RE is presented, considering both dedicated solutions and packages supplied as add-on with ‘traditional’ CAD systems. Finally, possible improvements to be addressed by the research in the RE field are discussed, outlining potential future trends that are still to be investigated.

Low-cost RGB-D cameras are increasingly being used in several research fields, including human–machine interaction, safety, robotics, biomedical engineering and even reverse engineering applications. Among the plethora of commercial devices, the Intel RealSense cameras have proven to be among the most suitable devices, providing a good compromise between cost, ease of use, compactness and precision. Released on the market in January 2018, the new Intel model RealSense D415 has a wide acquisition range (i.e., ~160–10,000 mm) and a narrow field of view to capture objects in rapid motion. Given the unexplored potential of this new device, especially when used as a 3D scanner, the present work aims to characterize and to provide metrological considerations for the RealSense D415. In particular, tests are carried out to assess the device performance in the near range (i.e., 100–1000 mm). Characterization is performed by integrating the guidelines of the existing standard (i.e., the German VDI/VDE 2634 Part 2) with a number of literature-based strategies. Performance analysis is finally compared against the latest close-range sensors, thus providing a useful guidance for researchers and practitioners aiming to use RGB-D cameras in reverse engineering applications.

Microtia is a congenital malformation affecting one in 5000 individuals and is characterized by physical deformity or absence of the outer ear. Nowadays, surgical reconstruction with autologous tissue is the most common clinical practice. The procedure requires a high level of manual and artistic techniques of a surgeon in carving and sculpting of harvested costal cartilage of the patient to recreate an auricular framework to insert within a skin pocket obtained at the malformed ear region. The aesthetic outcomes of the surgery are highly dependent on the experience of the surgeon performing the surgery. For this reason, surgeons need simulators to acquire adequate technical skills out of the surgery room without compromising the aesthetic appearance of the patient. The current paper aims to describe and analyze the different materials and methods adopted during the history of autologous ear reconstruction (AER) simulation to train surgeons by practice on geometrically and mechanically accurate physical replicas. Recent advances in 3D modelling software and manufacturing technologies to increase the effectiveness of AER simulators are particularly described to provide more recent outcomes.

RGB-D cameras are employed in several research fields and application scenarios. Choosing the most appropriate sensor has been made more difficult by the increasing offer of available products. Due to the novelty of RGB-D technologies, there was a lack of tools to measure and compare performances of this type of sensor from a metrological perspective. The recent ISO 10360-13:2021 represents the most advanced international standard regulating metrological characterization of coordinate measuring systems. Part 13, specifically, considers 3D optical sensors. This paper applies the methodology of ISO 10360-13 for the characterization and comparison of three RGB-D cameras produced by Intel^® RealSense™ (D415, D455, L515) in the close range (100–1500 mm). ISO 10360-13 procedures, which focus on metrological performances, are integrated with additional tests to evaluate systematic errors (acquisition of flat objects, 3D reconstruction of objects). The present paper proposes an off-the-shelf comparison which considers the performance of the sensors throughout their acquisition volume. Results have exposed the strengths and weaknesses of each device. The D415 device showed better reconstruction quality on tests strictly related to the short range. The L515 device performed better on systematic depth errors; finally, the D455 device achieved better results on tests related to the standard.

The production of textiles has a strong impact on the environment due to both over-consumption and the practice of production processes requiring the use of substances to manufacture, treat, and dye fabrics. In this context, finding new ways and solutions to transform used textiles into by-products or inputs for production is a trump card for the future of the textile sector. This may be accomplished by developing a circular economy policy, which involves large investments with a payoff only in a medium to long-term perspective. The main aim of the present work is to provide a set of guidelines to guide textile industries in the transition from traditional production processes to a systemic approach in consideration of the circular economy. This could leverage the efficient use of regenerated wool, the reduction (or lack) of waste production, and the management of the end-of-life of the product.