Amorphous carbon (a-C) thin films were deposited under the control of C 2 radical density using radical-injection plasma-enhanced chemical vapor deposition (RI-PECVD) with CH 4 /H 2 plasma. By actinometric monitoring of C 2 emission intensities, the plasma parameters were precisely controlled by changing in CH 4 -containing plasma excitation power independent of H 2 plasma excitation. The control of the incorporation of sp 2 -C clusters in the a-C films during the a-C film depositions is demonstrated by tailoring Raman positions vs. full widths at half maxima for the G band around 1580 cm –1 to the RI-PECVD parameters.
18 February 2019 in Journal of Physics D: Applied Physics
The tin oxide (SnO 2 )-graphene composite was synthesized by the in-liquid plasma method using SnO 2 nanoparticles (average diameter ~30 nm) dispersed ethanol as a precursor without providing external heat. As observed from scanning electron microscopy (SEM) and transmission electron microscopy (TEM), the SnO 2 nanoparticles were distributed uniformly on flaky graphene sheets. The formation of SnO 2 and high crystalline graphene was supported by the Raman analysis and x-ray diffraction (XRD) studies. A facile, low-cost method operating at atmospheric pressure based on the in-liquid plasma technology can be utilized to fabricate SnO 2 -graphene composite using minimum precursors for future applications such as gas sensing devices and fuel cells.
25 May 2018 in Japanese Journal of Applied Physics
Quadruple mass spectrometric measurements of CH 3 density during radical-injection plasma-enhanced chemical vapor deposition to consider the sp 2 fraction of amorphous carbon (a-C) films were performed. The sp 2 fraction of the a-C films reached a minimum of 46%, where the CH 3 density was maximum for a residence time of 6 ms. The sp 2 fraction of the a-C films was tailored with the gaseous phase CH 3 density during the deposition. This knowledge is useful for understanding the formation mechanism of bonding structures in the a-C films, which enables the precise control of their electronic properties.