As the most frequent wound complication, infection has become a major clinical challenge in wound management. To overcome the “Black Box” status of the wound‐healing process, next‐generation wound dressings with the abilities of real‐time monitoring, diagnosis during early stages, and on‐demand therapy has attracted considerable attention. Here, by combining the emerging development of bioelectronics, a smart flexible electronics‐integrated wound dressing with a double‐layer structure, the upper layer of which is polydimethylsiloxane‐encapsulated flexible electronics integrated with a temperature sensor and ultraviolet (UV) light‐emitting diodes, and the lower layer of which is a UV‐responsive antibacterial hydrogel, is designed. This dressing is expected to provide early infection diagnosis via real‐time wound‐temperature monitoring by the integrated sensor and on‐demand infection treatment by the release of antibiotics from the hydrogel by in situ UV irradiation. The integrated system possesses good flexibility, excellent compatibility, and high monitoring sensitivity and durability. Animal experiment results demonstrate that the integrated system is capable of monitoring wound status in real time, detecting bacterial infection and providing effective treatment on the basis of need. This proof‐of‐concept research holds great promise in developing new strategies to significantly improve wound management and other pathological diagnoses and treatments.

Flexible electronics are a very promising technology for various applications. Several types of flexible devices have been developed, but there has been limited research on flexible electromechanical systems (MEMS). Surface acoustic wave (SAW) devices are not only an essential electronic device, but also are the building blocks for sensors and MEMS. Here we report a method of making flexible SAW devices using ZnO nanocrystals deposited on a cheap and bendable plastic film. The flexible SAW devices exhibit two wave modes - the Rayleigh and Lamb waves with resonant frequencies of 198.1 MHz and 447.0 MHz respectively, and signal amplitudes of 18 dB. The flexible devices have a high temperature coefficient of frequency, and are thus useful as sensitive temperature sensors. Moreover, strong acoustic streaming with a velocity of 3.4 cm/s and particle concentration using the SAW have been achieved, demonstrating the great potential for applications in electronics and MEMS.

Flexible ZnO/polyimide surface acoustic wave (SAW) based humidity sensors were fabricated and their performances were investigated. ZnO films deposited on polyimide substrates are (0002) oriented columnar nanocrystals with grain sizes of 50–60 nm. SAW devices with different wavelengths showed high transmission performance, and the sensors exhibited a good repeatability in response to the cyclic change in humidity from ∼5% relative humidity (RH) to ∼87% RH. The responses of the sensors to RH change increase with the increase in humidity. The sensitivity increases with the decrease in wavelength owing to the improved characteristics of the sensors with shorter wavelengths. A high sensitivity of 34.7 kHz/10% RH has been obtained from a SAW sensor with no surface treatment, demonstrating that the flexible SAW humidity sensors are very promising for applications in flexible sensors and microsystems.

Conventional spectrometer designs necessitate a compromise between their resolution and sensitivity, especially as device and detector dimensions are scaled down. Here, we report on a miniaturizable spectrometer platform where light throughput onto the detector is instead enhanced as the resolution is increased. This planar, CMOS-compatible platform is based around metasurface encoders designed to exhibit photonic bound states in the continuum, where operational range can be altered or extended simply through adjusting geometric parameters. This system can enhance photon collection efficiency by up to two orders of magnitude versus conventional designs; we demonstrate this sensitivity advantage through ultralow-intensity fluorescent and astrophotonic spectroscopy. This work represents a step forward for the practical utility of spectrometers, affording a route to integrated, chip-based devices that maintain high resolution and SNR without requiring prohibitively long integration times.

As a reliable indicator of human physiological health, respiratory rate has been utilized in more and more cases for prediction and diagnosis of potential respiratory diseases and the respiratory dysfunction caused by cystic fibrosis. However, compared with smart mobile electronics, traditional clinical respiration monitoring systems is not convenient to work as a household wearable device for real-time respiration monitoring in daily life due to its cumbersome structure, complex operability, and reliance on external power sources. Thus, we propose a wearable wireless respiration sensor based on lateral sliding mode triboelectric nanogenerator (TENG) to monitor respiratory rates by sensing the variation of the abdominal circumference. In this paper, we validate the possibility of the device as a respiration monitoring sensor via an established theoretical model and investigate the output performance of the sensor via a series of mechanical tests. Furtherly, the applications of the respiration sensor in different individuals, different breathing rhythms, different active states, and wireless transmission have been verified by a lot of volunteer tests. All the results demonstrate the potential of the proposed wearable sensor as a new alternative for detecting and monitoring real-time respiratory rates with general applicability and sensitivity.